motor oil Germany

...INOX Tar Remover is a very fast-acting cleaner for all tar, grease and oil contamination, as well as similar soiling on motor vehicles. The product can also be used for cleaning tools, equipment, devices and machines in which tar is processed. Due to the fast effect the tar remover is particularly economical in use and, when used properly, rubber and plastic friendly.

... l Number of Measures: 4-stroke engine Cylinder: 1 Power Source: Oil Max Cutting Length. Cutting Depth: 187 mm Max Length. Separation Disc Diameter: 500 mm Inlet Diameter: 25.4 mm Separation Disc Depth Control: Handwheel Product Length: 1,150 mm Product Width: 615 mm Product Height: 940 mm Weight: 100 kg...

... litres capacity. For this we use DIN oil tanks but also special tanks that are individually adapted to your needs. Here it is immaterial whether the oil tank is made of steel, stainless steel or aluminium. For special designs such as table valves, tank support frames, supporting structures for motor pump units and many more special components connected with your hydraulic unit we are of course...

...Delivery is without hydraulic oil, and standard hydraulic oil used is TL 46. All Härtel press products are manufactured according to CE standards and come with up to 24 months warranty from HPW 60 K. We can also manufacture these presses according to customer specifications.

... delivery capacity from 0.43 m³/min to 41 m³/min Drive power from 4 - 250 kW The Air Control system thinks, monitors, and documents the compressor. Design: Oil-lubricated Power: 4.0 - 250.0 kW Type: Screw compressor Effective delivery quantity: 430 - 41,000 l/min...

...With the ADB drum rack, original containers such as motor oil, transmission oil, hydraulic oil, and similar liquids can be stored in an environmentally friendly manner. Stable construction using square tubes (30 × 20 × thickness 2 mm). No more tipping or standing up of the drums required. Smooth drum bottoms allow for easy cleaning. Suitable for 30 and 60-liter drums. Compartments: H 100 x W 350...

...Special design features and tight tolerances prevent the spread of an explosion within the motor housing to the surrounding area. This makes the Explosion-Proof MVE-D suitable for applications in the oil and gas industry.

...The hydraulic adjustment system Movotec consists of cylinders and a pump, which is driven by a hand crank or an electric motor. The resulting drive pushes the oil from the pump into the cylinders and back from the cylinders to the pump. This allows the cylinders to extend and retract within the designated adjustment range (stroke). The Movotec product range includes the following systems: - As a retrofit system for heavy-duty workstations, - As a height adjustment system with ready-to-install corner legs, - Or as a complete table adjustment system to create an ergonomic workplace.

... challenge for conventional pumping systems. KAMAT Pumping Solution – Efficient and Lightweight The KAMAT Offshore Pumping Solution revolutionizes traditional approaches. Instead of heavy submarine-like pumping units, KAMAT relies on an innovative solution: the entire pump, drive train, and electric motor are filled with oil, while a compensator ensures pressure equalization between the sea surface and depth.

...-free attachment of the motor to the stand Features: Drill stand BST 352V – Quick-change plate with universal coupling – machine mount for drive motors from different manufacturers – optional: neck clamping Ø 60 mm with...

... for hulls and extraction meal in the seed oil industry. The modular design of the pelletizing system and the adjustable die speed of 4 to 8 m/s without torque loss cover nearly all pellet applications. The Gorilla ensures good pellet quality with a high PDI (Pellet Durability Index).

...Motor oil...

... Volumetric flow rate: up to 2200 l/min Head: up to 62 m Pumped product: for cooling liquids, emulsions, oil Drive: electric Priming: under load Technology: centrifugal Sector: industrial, for machine tools, for the metallurgical industry Other features: compact, horizontal mounting, multistage, monoblock, inline, for emulsions, for cutting fluid...

...Suitable for the lubrication of transmission gears, differentials, and steering gears in motor vehicles where the manufacturer specifies EP gear oil types. Based on synthetic base components and a highly shear-stable VI improver, which ensures the desired SAE class according to DIN 51512 even under the highest loads over the long term. Due to its excellent viscosity-temperature behavior, this product can be used as a year-round oil.

... possibilities are open to you: - Pipeline construction - Development areas - Slope and embankment compaction - Shaft compaction - Backfilling of structures - Track construction FEATURES - Patented vibration limitation system - 2-shaft directional exciter - Self-locking mechanical rotating device - Rubber buffers (no metal-on-metal impact under extremely high pressure) - No leak oil line required - Maintenance-free exciter unit - Operates hydraulically (with reduced emissions and low fuel consumption) - Mechanical rotating device as standard - Optional with hydraulic rotary motor...

...This oil-free piston vacuum pump is equipped with a capacitor, a vibration absorber and a silencer. It provides a displacement of 108 l/min and reaches a maximal vacuum of 27 mbar (abs). Voltage (*) V:230 Frequency (*) Hz:50(60) Motor KW:0.53 suction capacity/displacement l/min:108 Max. Vakuum / Max. vacuum mbar (absolute):27 Max. Stromverbrauch/Max. current A:2.5 Weight kg:11.5 Sound emissions/noise level dB(A)/1m:59 Operating mode/duty cycle:S1 ~ 100% Dimensions (lxwxh)/Dimensions (lxwxh) mm:275 x 140 x 240...

... 150 liters and is removable. A powerful submersible pump delivers sufficient coolant to the cutting area. Cutting can be done with either emulsion or special grinding oil. When cutting inductively hardened workpieces (hard on the outside, soft on the inside), increased wear of the cutting discs may occur! Technical Data Workpiece diameter: 50 mm. Cutting speed: 30 m/sec Motor power: 1.5 KW Cutting...

... control of the lifting units. To prevent the system from becoming too long, the use of a spur gear is recommended. This allows the motor to be arranged parallel to the lifting spindle, and the gearbox with alternative gear ratios of i=4 / i=10 and i=25 enables the use of smaller motors.

...Prototypes made from polyamide PA6 with up to 35% GF content, resistant to oil, coolant, and fuel. Operating temperatures up to a maximum of 200°C.

...HSK/G 1130 x 1.5 mm Gear motor 4.0 kW Cycle time approx. 1.2 s Cutting angle 1.33° Hold-down opening 6 mm Special features Hold-down, table top and shear blade shaped according to sheet profile Manual oil central lubrication...

... brakes front and rear Color: White Orange Integrated wheel 8AH, White Orange Integrated wheel 10AH, White Orange Integrated wheel 13AH, Gray-Green Integrated wheel 8AH, Gray-Green Integrated wheel 10AH, Gray-Green Integrated wheel 13AH, Gray-Green Speed: 30-35 km/h Battery: 18650 lithium battery (8AH increases range to 50 km / 10AH increases range to 70 km / 13AH increases range to 90 km) Motor: 36V350W high-speed motor Controller: LCD liquid crystal display, hidden controller Brake lever: Five-star automatic shut-off...

... suitable for DIY enthusiasts. Equipment * Rotatable head, 45° to the right * Worm gear in oil bath * Small pump for coolant * Coolant filter * Rod lock * Operating key * User manual for operation and spare parts Scope of delivery * Circular saw blade Ø 225 mm * Adjustable stop * User manual Saw blade: Ø 225 mm Max. vice opening: 70 mm Motor power: 0.75 kW Speed: 52 rpm Mains voltage: 400 V Fuse: 16 A Weight: 41 kg...

...Application possibilities of the Eisele slurry mixer are only in the agricultural sector. Key data: Double-start worm forced circulation With PTO-drive 30/48 kW or with electric motor 11/15/18.5 kW Threaded spindle with crank Three-point mounting, can be tipped Stable design, highly wear resisting mechanical seal, shaft in an oil bath Agitation shaft length 3,50 – 6,00 m A higher circulation...

... available or only partially available, this device will come into play. Its lightweight design allows painters to work easily in residential areas. Flexible application possibilities due to low weight and 220V connection Oil-free and condensate-free air for excellent surfaces Optimal air performance adjustment through speed control electronics Work like with the compressed air version using pre-air, no annoying continuous blowing of the spray gun Improved safety technology through separate motor cooling, large filter surfaces...

... winter fuel at HEL, an additive to improve flow properties must be added to each refueling of our generators throughout the year. If the refueling is done by the customer, we kindly ask for proof upon return of the generator that the heating oil additive has been added, and that it is low-sulfur heating oil EL. Any damages resulting from refueling with unsuitable heating oil or from insufficient additive additions will be the responsibility of the renter. Alternatively, refueling our generators with diesel fuel is still possible.

... the NR-630 series ▪ Micron rating available from 3 ... 25 μm Clogging Indicator ▪ STAUFF Clogging Indicator Type HI Construction ▪ Mobile filter system - mobile filter unit Weight ▪ SMFS-U-060: approx. 165 kg / 364 lbs ▪ SMFS-U-110: approx. 177,2 kg / 391 lbs ▪ SMFS-U-CM-110: approx. 220 kg / 485 lbs Nominal Flow Rate ▪ SMFS-U-060: max. 60 l/min / 15 US GPM ▪ SMFS-U-110: max. 110 l/min / 30 US GPM ▪ SMFS-U-CM-110: max. 110 l/min / 30 US GPM Motor ▪ 400 V AC 50 Hz ▪ SMFS-U-060: 2,2 kW; 1440 U/min ▪ SMFS-U-110: 4 kW; 1445 U/min ▪ SMFS-U-CM-110: 4 kW; 1445 U/min Media Compatibility ▪...

...{"Chain":"KMC X10e","Frame":"Aluminium 6061, Gravity Casting, hydroformed, Quick release 5 x 135mm, Disc brake Post Mount","Fork":"SR Suntour MT-E45 LO-R Lockout, Steel spring/oil, Travel: 63mm, Aluminium shaft 1 1/8\" - 1 1/2\" tapered, Thru axle","Tyres":"Schwalbe Energizer Pro, 40-622, Puncture protection, Reflex","Motor":"Yamaha PW-System, 500W, 45km/h","Rear derailleur":"Shimano Deore XT...

... implemented for the first time by hyco vacuum technology using a magnetic coupling, achieves a hermetic seal. The pump operates more quietly. In the event of a membrane rupture in the pump, there is no loss, as the design principle ensures that there is no leakage. Contactless transmission is guaranteed, as mechanical transmission is completely absent due to the independent bearing of the pump, and an additional seal to the motor is present.

...Modular construction, operating pressure up to 250 bar, alternating current motors with a motor power of up to 3 kW Three-phase motors with a motor power of up to 30 kW Gear pumps with a flow rate of 1 cc to 60 cc / revolution Oil tanks in various sizes from 16 liters to 180 liters nominal volume...

...on rivers, and lakes. The hulls are designed as a catamaran to create a stable working platform. Both hulls are identical. The drive unit is equipped with a 9.9 HP outboard motor for the Seahunter 9.9 or a 25 HP outboard motor and a control console with hydraulic steering, electric starter, and motor adjustment for the Seahunter 25SC. The outboard motor is fitted with a propeller protection ring. The platforms can be coupled together lengthwise and crosswise with quick-release pins to form platforms of any size. The load capacity...