fluid control Germany

...Series / Type 63 2/2 way externally controlled valve. Function: In rest position, the valve is closed by spring-action and fluid pressure. When the actuator is pressurized, it lifts the control piston and simultaneously raises the valve disc – the valve opens. Valves of this type can also be supplied with the function of being opened by spring force. Additionally, there is a double-acting piston actuator that allows for flow in either direction. Technical Data: Connection: G 1/4" - G 3", DIN ISO 228 *1/2" + 3/4" Rg5 DIN 2999 Installation position:...

... quantity is continuously regulated via a valve in the return line. A portion of the flow rate in the nozzle is diverted and returned to the tank. The maximum atomized flow rate is achieved when the control valve is closed. A uniform, fine liquid atomization is achieved across the entire control range. Usage Gas cooling in medium and large evaporative coolers Gas cooling in clinker coolers...

...-friendly touchscreen remote control - Easy adjustment of paper web width and water amount - Low maintenance costs Supply voltage: 3 x 400 V / 50 Hz (3 x 480 V / 60 Hz); 3 kVA protection: 16 A (15A USA) Operating ambient temperature: +5...+40 °C (+41...+104 °F) Ambient humidity: max. 80% r.H., non-condensing Dimensions: 1025 - 1665 mm x 1070 mm x 405 mm (W x H x D) Weight: 250 to 350 kg, depending on...

... Plunger speed: 1.2 sec. - 20 min./full stroke (speed ranges vary depending on syringe size and tubing) Syringes: Type: XP: 50µl, 100µl, 250µl, 500µl, 1.0ml, 2.5ml, 5.0ml Imprecision: 0.05% CV within run at full stroke (for 1000µl syringe and above) Inaccuracy: <1.0% at full stroke Fluid contact: Glass, PCTFE and Teflon Valve/valve drive: Valve options: 120° 3-port distribution Turn time: 250ms...

... distribution Opening of the fixed vice cycle repetition. * Bearing-mounted disc shaft * Two pneumatic vices * Teflon clamping jaws for workpiece fixation * Control key * Operating manual for use and spare parts * Footprint dimensions: 3800 mm x 1600 mm x 1700 mm...

...Impregnation systems to close micropores in metal castings as well as in copper, aluminium or magnesium alloy castings. The parts to be impregnated are fixed in baskets. The latter are transported by a special crane system as well as with reservoir roller conveyors. Excess material is removed by centrifuging of the baskets. The impregnating agent remaining in the pores in fluid form is hardened by heating in a hot water bath. The process sequence runs fully automatically under a microprocessor control.

... threaded connection versions also available in stainless steel. The pulse diaphragm valves can be optionally equipped with an integrated pilot valve or with pneumatic control. The permissible pressure range for the standard valve series is between 0.5 and 7.5 bar for sizes up to 2 ½", and between 0.6 and 5.0 bar for 3".

...The control cabinets from KÜBLER ESSIG are designed by us and then built in-house. For electronic design and hardware planning, we use EPLAN P8 and EPLAN Fluid.

...Double-acting support cylinders are available in various sizes tailored to your load conditions. Stroke lengths can be chosen freely. Integrated safety valves and oil connections in the cylinder base without external oil supply. Valve block control via valve control module and tilt sensors with manual control unit. Can be integrated into a CAN bus system. Robust components, specially designed for use in mobile applications. 12-24 V. Power supply for vehicle electrical systems. Compact unit for oil supply for vehicles without hydraulics.

...We supply our products to the following industries: Hydraulics and Fluid Technology Precision Engineering Automotive Electrical, Testing, and Measurement Technology Medical Technology We process ferrous and non-ferrous metals, stainless steels, and plastics. To provide our customers with maximum benefit, we collaborate with various hardening and surface finishing companies.

...Flow Simulation (CFD) for Optimizing Indoor Airflows, Building Aerodynamics, etc. Numerical flow simulation (English: Computational Fluid Dynamics, CFD), fundamentally a calculation method for flows of all kinds, is primarily used by us in building climate control for simulating rooms and buildings. Another area of application is flow and thermal engineering product development.

...The Giga X7 Professional redefines coffee enjoyment. The quick route to high pleasure, whether it's cappuccino, espresso, macchiato, café latte, and more. Coffee specialties at the highest level – two grinders, two heating systems, two pumps, and two fluid systems, along with a thoughtfully designed innovative control concept. The Giga X7 Professional, available in elegant black or sophisticated...

...MANNOL AdBlue is a highly pure 32.5% by weight urea solution. It is used as an additional operating fluid in diesel passenger cars and trucks equipped with SCR technology (Selective Catalytic Reduction). This leads to optimized engine performance and a reduction in the emission of harmful particles in the exhaust gases. As a result, the environmental regulations Euro 4 and Euro 5 are met...

...Wastewater treatment plants | Industrial plants | Valves and backflow preventers | Control systems | Apparatus engineering, Fluid technology | Level controls, Measurement and control technology...

... between 0.10 and 0.70 mm. All of our saws utilize gravity and/or weights as a method to achieve and maintain consistent feed speeds. Additionally, all have a continuously variable speed control for the wire. Coolant is not required at all; however, we recommend using our cleaning fluid to remove loose particles from the diamond grains. well Diamantdrahtsägen exert only minimal force on the workpieces. Very little heat is generated, which is dissipated through the wire to the drum.

... (main business area) • Development and production of special components/solutions (main business area) • Special components (e.g., turned parts, stamped parts, cast parts, and fully assembled units) according to customer specifications and technical drawings • Coupling technology • Control technology (control valves) • Fastening technology (clamps) • Ball valves in steel or stainless steel • Lifting cylinders • Measurement technology • Throttle valves • Check valves • Control plates • Hydraulic motors and pumps...

... control the flow of beer in dispensing systems, filling the glass in the shortest time while achieving the optimal foam head. WIG, MIG, or MAG - in arc welding machines, our valves regulate the flow of shielding gas. In vehicle construction, our valves and pumps dose additives for cooling and lubricating natural gas engines. Our valves are also used in modern cleaning systems for sensors in vehicles...

...Bürkert Fluid Control Systems is one of the world's leading manufacturers of measuring, control and regulating systems for liquids and gases. Bürkert products are used in a wide range of industries and applications – ranging from breweries and labs to medical, bio-engineering and aerospace technology. With a portfolio of more than 30,000 products, Bürkert is the only supplier to offer all fluid...

FF Fluid Forming GmbH was founded in 2002. We are a medium-sized company based in Lastrup, Cloppenburg district in northern Germany. Our expertise in mechanical engineering, hydraulic and electronic control technology has been successfully consolidated in the field of sheet metal high-pressure forming processes. With a new machine concept – the FormBalancer – we are capable of controlling high...

...We offer expert consulting and services for fluid dynamics challenges in both experimental and numerical/simulative areas, with a focus on multiphase flows. In addition, we support companies in the design of particle separators using modern measurement techniques as well as numerical flow simulation (CFD). Another focus is on the atomization technology of liquids. Here, we provide spray nozzle designs and spray analyses using modern optical measurement methods.

Fluid control. We handle that. As an independent German company based in Ettlingen near Karlsruhe, JUNG-FLUIDTECHNIK is a competent and reliable partner for the: - Hydraulic industry - Automotive industry - Medical technology - Machine tool construction - Model making Our compact products for hydraulic applications, such as pumps, units, valve cartridges, and special controls, are used...

... 1976 - Establishment of GESTRA Inc. in the USA 1983 - Renaming to GESTRA AG, acquisition of KSB's business shares 1988 - Inclusion in SIEBE PLC. 1994 - Integration of UNIVAM GmbH 1995 - Integration of P&W Ventil- und Regler-Service GmbH 1997 - Renaming to GESTRA GmbH 1999 - SIEBE PLC & BTR merge to form Invensys plc. 2002 - Invensys Flow Control is sold to Flowserve 2004 - Renaming to GESTRA AG 2017 - Inclusion in Spirax-Sarco Engineering plc...

The name KIESELMANN stands for high-quality fluid technology, including components and systems that enable the control, manipulation, and production of liquid to pasty media. With safe, innovative, and reliable products, we provide our customers in the food, chemical, and pharmaceutical industries with the means to meet the needs of their markets today and in the future. In over 80 years of...

... Single-phase flow and multi-phase flow Thermal management Dosing processes and mixing processes to determine concentration Air conditioning and building aerodynamics Particle simulation and dispersion of flue gases Fluid-structure interaction Coupling of 1D and 3D simulation MULTI-PHASE FLOW Filling processes (cooling circuit, battery stack, etc.) Injection processes (AdBlue® fuel) Pumps...

... technology, and fluid technology. A computer-controlled production, planning, and control system (PPS) with an integrated calculation program facilitates planning, avoids errors, and enables quick and flexible decisions. Customers can benefit directly and be connected via a VDA interface. HAF Präzisionstechnik sees itself as a value creator and partner of its customers. HAF Präzisionstechnik is an ISO 9001 certified quality company that continuously innovatively improves its processes.

... working to ensure the quality standard. Upon request, we can incorporate further requirements from our customers regarding production tolerances into the workflow. We have been certified according to DIN EN ISO 9001 since 1996. The Pioflex quality standard at a glance: - Electronic control of our systems to maintain the specified tolerance fields - Continuous process control using ultrasound...

... automation technology; Assembly of assemblies; Assemblies assembly; Foil front panel; Foil front panels; Membrane keyboards for front panels; Membrane keyboard for front panels; Membrane keyboards (complete solutions); Membrane keyboard; Membrane keyboard (complete solution); Front panels (complete solutions); Front panel; Front panel (complete solution); Control technology; Control techniques; Keyboard foil; Keyboard foils; Assemblies, electromechanical; Assemblies for placement machines; Assemblies for vehicle construction; Assemblies for the automotive industry; Assemblies for fluid technology...

... Gefeg-Neckar, only internal rotor motors with a roller rotor are manufactured. The following descriptions refer to these types with a power output of up to 750 watts. Field control The fundamental characteristics of electric motors depend on the method used to apply voltage to their windings. Self-controlled (position-controlled, field-controlled) and externally controlled (network-controlled...

... also aligned with this. The successful certification of our company according to DIN EN ISO 9001 confirms this commitment. The safety technical execution of our machines is always carried out according to the valid EN guidelines and is additionally certified with a BG type examination. Since February 2010, our presses have been equipped with state-of-the-art safety control systems and already...