chemical-free Germany

... against corrosion Non-toxic Loosens dirt Loosens rust Chemical-resistant Does not resinify Separates Withstands high pressure High penetrating properties CFC- and silicone-free Fields of application PL 200 is suitable for all common materials, e.g. metal, wood, rubber and almost all synthetics. It’s also suitable for almost all synthetic combinations in gear boxes, bearings, chains, screw connections, switches, channels, locks, etc. PL 200 can be used freely in the food sector. Usage Always shake well before use! Check plastic parts beforehand for compatibility, then just spray on, using...

... capacity:2.7 Nm/cycle Energy capacity emergency use:5.7 Nm/cycle Energy absorption:39 % to 62 % Dynamic force range:550 N to 21,200 N Operating temperature range:-40 °C to +90 °C Construction size:30 mm to 102 mm Mounting:In any position Material hardness rating:Shore 55D Shore Material:Co-Polyester Elastomer Environment:Resistant to microbes, seawater or chemical attack. Excellent UV and ozone...

... massif, although not geographically. Himalayan crystal salt is a natural table salt that is about 250 million years old. It is free from chemical additives and/or flow agents and is harvested in the same way it has been for hundreds of years. The Himalayan crystal salt was formed over 250 million years ago during the disappearance of the original ocean. It is hand-harvested in the Tibetan highlands. In the past, Himalayan salt was also referred to as "salt of the kings" because this high-quality salt was sold only to the local nobility...

...A classic application of glass is in the medical field. No other material is as easy to clean and provides the necessary hygienic surface and chemical resistance required in medicine. Microtiter plates, glare-free surgical lights, and control panels for laboratory equipment meet the highest quality standards through strict testing norms. Glass, with its specific properties, is a leader in hygiene and, due to its precision processing, is unmatched in the sensitive area of medical care.

...Application Areas: G-Sealed can be used in many application areas, but it is particularly suitable for the automotive industry due to its excellent thermal and chemical resistance. Customer Benefits: • Non-reactive and non-curing coating • Immediate sealing right after the connector is installed • A dry, elastic, and tactile coating • Good thermal and chemical resistance • Applicable to both metallic and non-metallic materials • Free from labeling and therefore not hazardous or environmentally harmful...

...Extraction system, free workspace, combined supply & exhaust air When working with hazardous substances, it is essential to be comprehensively protected from harmful gases or dust. In the pharmaceutical, biotechnology, and chemical industries, high standards must be met at the corresponding workplaces. Therefore, PURIMA offers suitable free workspaces thanks to effective extraction techniques for a variety of fields.

...To remove burrs with a size of up to 0.3 mm and punch burrs from iron components, OTH employs the method of chemical deburring. This non-electrolytic process allows for the uniform removal of both external and internal burrs, as well as hidden burrs in areas such as bore intersections and undercuts on iron workpieces. The result is burr-free components with a smooth surface, without breaking or...

...To minimize the disadvantages of layer thickness fluctuations in the HAL process and to achieve a lead-free surface, a new method has been developed: the Chemical Tin Process. Modern electrolytes are now in use, which impress with their positive properties. Noteworthy are: fine grain, pore-free, good shelf life, and flat/even structure. In this process, the cleaned and etched circuit board is immersed in a chemical bath. Through a chemical reaction, copper atoms are exchanged for tin ions, resulting in the growth of the tin layer. Subsequently, the circuit boards are cleaned and dried.

...Supplier of hardwood charcoal – in 15kg, 20kg bags. We export charcoal of all kinds in various sizes: 5kg, 10kg, 15kg, 20kg bags. We are the best in Europe. Our hardwood charcoal is characterized by a high heating value of 7500 kg cal, is chemical-free, spark-free, and smoke-free. The moisture content is below 8%, the diameter is over 4cm, the carbon content is over 80%, and the ash content is below 4%. The burning duration is 2-3 hours. Packaging details: 15, 20, 25kg bags or according to customer specifications. Country of origin – GERMANY.

... with blades made of natural diamond or MKD for polish turning. The vacuum brazing is flux-free. In the so-called active brazing process, titanium allows wetting of the surfaces. While cemented hard metals can also be inductively brazed, diamonds, CVD and ceramics must be actively brazed in a vacuum. When brazing PCD and PCBN, not only the hard metal substrate but also the PCD or PCBN layers are wetted.

...This product is rich in plant nutrients and humus from a highly hygienic and professional composting of green waste. The high pH level of the biochar improves the physical and chemical properties of the soil, increasing nutrient availability and creating a favorable environment for the development of beneficial bacteria and a sustainable soil ecosystem. Biochar has a high bulk density, which...

...A floor heating panel serves as a reliable method in flooring construction technology. It provides optimal results as a system for crack-free and functionally secure floating screeds and heated screeds with coverings made of ceramics, natural stone, and other flooring materials. The floor heating panel is rot-proof and requires no special care or maintenance. Before and during the screed installation, the polystyrene stud panel should be protected from damage due to mechanical impacts by appropriate measures, such as laying down walkways.

... manufacturing, we also offer production on stock in the form of framework agreements to enable you shorter delivery times for your orders. For more information, please visit our website or feel free to contact us personally.

...FLUID FILM Gel B FLUID FILM Gel is a higher-viscosity, soft, physiologically safe, and solvent-free single-layer corrosion protection coating with a very high lanolin content.

...The only desiccant with a heavy metal-free moisture indicator is the ORANGE® drying beads. This desiccant is a replacement for the blue gel.

...Defoamers and degassers for paints and coatings based on renewable raw materials for natural lacquers Surface-active agents that destroy foam bubbles at the paint surface or transport foam bubbles from within the paint to the surface. Defoamers and degassers for aqueous and non-aqueous natural lacquers and other coating systems, VOC-free.

...The A15GB acrylic casting system is a medium-viscosity 2-component combination of acrylic resin and mineral powder based on a solvent-free water solution, with a processing time of 10-20 minutes. Areas of application: - Creation of decorative and technical elements - Production of sculptures and reliefs - Creation of detailed models - Replication of objects Properties: - Low heat development...

...Paint-Stop (green): Temperature resistant up to a maximum of 180°C, silicone-free and free from paint-damaging substances. Dust-Stop (yellow): Temperature resistant up to a maximum of 80°C, additionally equipped with an antibacterial dust-binding agent, silicone-free.

...A powerful, solvent-free degreaser. The advanced surfactant technology provides maximum efficiency in removing contaminants, especially in applications.

... polyurethane gel for industrial applications as well as for the media and advertising industry. Polyurethane gel pads with a colorful printed insert are ideal advertising carriers. PROPERTIES: • shock-absorbing • high tear resistance • UV resistant • adhesive properties adjustable • solvent-free • plasticizer-free • temperature resistant between -40°C and +90°C RAW MATERIAL: • adhesive (without skin) • non-adhesive (with skin) • sheet goods up to 300 mm width and up to 500 mm length (in various thicknesses) CUSTOMIZATION: • die-cut parts...

... can be used in all areas where photoelectric smoke detectors are employed – for example, in industrial facilities, public institutions, or private residences. Odor: slight solvent smell Features: silicone-free, evaporates without residue Silicone-free: yes Shelf life: 24 months Size: 150 ml...

...As the ideal heavy-duty plastic pallet for the food, pharmaceutical, and chemical industry, the completely closed TC1 Euro pallet serves as a benchmark for all closed load carriers. The cavity-free construction of this hygienic plastic pallet offers reliable protection against water ingress or contamination and enables excellent and easy cleaning. Characteristics: Available with 3 runners...

...If you’ve got big ideas, then the Delta is the perfect structure for you. The geometric lines of the space-frame structure create a distinctive roofline while also providing clear internal heights of up to 9m and gable widths of up to 65m as well as column-free spans of up to 35m, where required. Generous internal heights and lots of branding space The Delta can be easily branded to reflect a...

... fibres, which allows us to find a suitable solution for every application. We also offer lint-free products, of course. In addition to our tried and tested basic qualities, we also develop individual solutions for abrasive and non-abrasive cleaning plush. We can produce plush fabrics tailor-made to your needs using a variety of yarns, fibre blends and coatings. This also includes cleaning plush fabrics for use in fully automatic cleaning systems. We make particularly hard-wearing plush fabrics for textile wash facilities, which have been specially developed for use in wet or dry ...

...Chemical suction and pressure hose according to EN 12115 Chemical suction and pressure hose, suitable for a variety of chemicals; including hydrocarbons, acids, and alkalis. Temperature range: from -30°C to +100°C (depending on the medium), for steam cleaning pressure-free short-term up to +130°C Electrical resistance: less than 10 to the power of 6 Ohms Insulation resistance: less than 10 to...

...The nonwoven core of our Spill Soft chemical absorbent wipes is protected on both sides by a spunbond layer. The material has a higher tensile strength, is lint-free and dust-free, and is extremely pliable due to its very soft texture. It absorbs a wide range of chemicals, including aggressive acids and caustic substances, without being compromised. The product does not disintegrate and does not cause any chemical reaction with the absorbed substance.

... of mechanical parts) » highest chemical resistance » robust, thick-walled design » long-lasting and abrasion-free » design for the operation under demanding conditions » open impeller (i.e. solids up to 3 mm grain size and 10 Vol. % possible) » no abrasion into the medium to be pumped (high purity applications) » no metal parts are in contact with the medium » easy to maintain » universally applicable, quiet and compact » various chemical resistant materials can be supplied from the warehouse...

... film thickness 30 rolls = 1 pallet unit per kg Features: Proven chemical corrosion inhibitor • Excellent barrier against oil, water, and moisture Odorless, toxic-free, recyclable • Heat sealable, tear-resistant • Safe and easy to use, no special handling required • Long-term corrosion protection • Parts are clean, dry, and ready for use upon removal, requiring no additional cleaning or reprocessing • RoHS and TRGS 615 compliant...

... exhalation valve. Tested minimum protection up to 50 times the MAK value. For more information, click here. Masks certified to standard EN 149:2001 should be used for protection against particulate pollutants such as dust, smoke, spray, and mist, but not for protection against gases. Special features include an exhalation valve and a fully sealed lip with a foam-padded nose area ensuring a pressure-free fit for effective protection. Pre-shaped mask body = not ... Article number: 3097301...

...The BALESO moisture absorber reduces humidity in the packaging area and supports the corrosion protection effect of the EXCOR VCI products. The EXCOR BALESO moisture-absorbing bags are made from 100% natural bentonite (alumina) and contain no chemical additives. The packaging material is available in two versions: dust-free (Type A) and dust-tight (Type B) moisture-absorbing bags, which are made...