air tests Germany

...drinking water pipes with air according to DIN EN 806-4 and ZVSHK guidelines, differential pressure tests up to 1 bar, testing of wastewater pipes according to EN1610, ALL no problem. Documentation via IR interface to thermal printer on document-compliant long-term stable thermal paper, detailed reports in DIN A4 format or as PDF reports via PC software.

... process and the simultaneous introduction of air into the floc structure are crucial for the function and performance of the flotation systems. Specific preliminary tests with the respective wastewaters concerning the later flotation system and its sizing are essential. For this purpose, ALMAWATECH has its own technical center available for pilot tests. This allows for precise determination of flocculation and exact calibration of the flotation systems.

... the available multi-gas option, OEM projects can also integrate various gas calibrations into a single sensor. The available self-tests allow for the verification of the entire analog and digital signal chain during operation. Consequently, the mass flow meter is well-suited for use in safety-critical applications. Specification: Measurement principle: Thermal mass, CMOS sensor Sizes: ¼" and ½" G Measurement ranges: up to 20 nl/min Accuracy: Up to +/- 5% of full scale Measuring gases: Air, O2, N2, Ar, CO2, N2O,...

... the hydrophilic paper fibers remain outside. The rising, ink-particle-laden foam is automatically discharged via a removal device. The laboratory flotation cell is used for technological tests and preliminary investigations. Advantages: • Seal-less magnetic stirring system • Integrated self-priming aeration system in the stirrer • Automatic foam discharge • Worldwide compatibility with all power supplies, regardless of voltage and frequency • High reproducibility • Easy to clean...

...Airflow blower with homogeneous air distribution according to WLTP, GTR15, and USS §1066. Electric height adjustment, flaps, and telescopic extensions. The airflow blower compensates for the lack of airflow during performance tests and driving simulations with motor vehicles on roller test benches. The generated airflow is directed, for example, through a low-lying, wide outlet channel...

... tests","D x L":"D x L: 246 x 722","suitable accessories available":"suitable accessories available","OEM quality":"OEM quality","Pressure":"Pressure: 12.5","Examination according to R34":"Examination according to R34","According to customer requirements":"According to customer requirements"}...

... automotive industry, the WEH® TW800 is used, among other things, for leak testing of fuel connections, connections for cooling and heating water, and other supply lines, as well as for refrigeration and air conditioning components. Due to its high-quality stainless steel design, the adapter meets the high demands of industrial testing. The TW800 quick connection is designed for a pressure range of up to 50 bar.

... classified in accordance with EN 13501-3 based on conducted fire protection tests (EN 1366-2). In Germany, approval from the Deutsches Institut für Bautechnik (DIBt) is required. Their use is regulated in the federal states by the legal introduction of the Model Ventilation Systems Directive (M-LüAR). Fire protection dampers must be inspected by a qualified person at least every 12 months; we would be happy to take care of that for you. Get a quote today.

... Abrasive Suspension (WAS) cutting method from ANT delivers. Tests prove: The ANT suspension jet cuts two to three times faster than conventional water jet cutting methods and at less than half the pressure. The reason for this is the composition of the water jet - a suspension made of water and an abrasive, which is pressurised without air before being squeezed out of the nozzle. The omission of...

... pipelines · Leakage Tests · Pipe nework monitoring · Monitoring in air pressure systems Features · Robust pressur data logger · 3x optional programmable input channels, e. g. for temperature, voltage/current, pulse · Direct measurements on LCD · Excellent measuring accurcy · Large memory capacity for up to 4 million readings · USB interface · Sampling interval programmable from 8 Hz tp 24 hrs · Battery life up to 8 years · "Stop-when-full" or "continuous" logging modes · LED indicators for alarm conditions...

...AGO Hydroair conducts regular maintenance, tests, and measurements for its customers to multiply the lifespan of the installed systems.

... Assisted Cycle) but a motor vehicle. For this reason, we have a "synthetic rider." This rider can deliver a freely defined power output precisely and is happy to work overtime (even on weekends and holidays). With a power output of up to 800 W, at a cadence of 120, and with "biometric pedal simulation," he is equipped for all scenarios. It doesn't matter whether the vehicle has front or rear drive, a mid-motor, or a combination of these. The test benches can simulate ALL scenarios, such as realistic rides against air resistance with climbs and...

...Leak tests can be performed using air, water, or vacuum. This technique is employed when proof of the tightness of a pipeline needs to be provided. In this process, the pipeline is completely or sequentially sealed with closure balloons. Afterwards, the sealed pipe section is subjected to air pressure, for example. A special computer program monitors the pressure trend according to specified...

... usually only be provided through elaborate and costly smoke tests while the building is already under construction, or alternatively in an earlier planning phase using fire simulations and/or smoke extraction simulations. Since these can be conducted before the construction phase, allowing for interventions during the planning phase, significant costs can be saved that would arise from potential changes during the construction phase.

... water is optional. Pressure and tightness tests are possible up to 0.1 MPa (1 bar), optionally up to 0.35 MPa or 2.5 MPa (3.5 or 25 bar). Load tests with air up to 0.3 MPa (3 bar) are optional. The device comes standard with Bluetooth. The professional device Dräger P7-TD performs leak quantity measurement in record time - without disassembling the gas meter, without volume determination, and without pressure increase. Measurements on gas pipelines are possible up to 0.1 MPa (1 bar), and the all-rounder also conducts water pipeline measurements using an external high-pressure sensor.

... suction and pressure Tests: • Driving rain resistance according to EN 12208: not tested • Air tightness according to EN 12207: not tested • Wind load according to EN 12210: not tested • Sound insulation Rw: not tested • NRWG according to EN 12101-2: no View width from the inside: 54 mm Profile depth approx.: 70 mm Clamping depth: --- Standard clamping thickness: 12 mm Integrated fastening technology made of stainless steel: yes Louver height: 250 mm to 800 mm Element sizes: Width AK frame minimum 450 mm to maximum 5,000 mm Opening angle: Depending on the louver height up to 75 degrees...

...The test stands feature a welded and powder-coated base frame on 4 to 8 support legs with rubber-metal foot elements. Compact and versatile performance test stand for load measurements on electric motors with air-cooled eddy current brake, equipped with torque and speed measurement devices, with disc brake for explosion-proof tests and gearbox motor loading, with drive shaft coupling and safety device, with hydraulically adjustable clamping plate.

... Environmental Simulation, which includes the areas of environmental simulation and thermal technology, and the Business Unit Air Solution. Weiss Umwelttechnik is one of the most innovative and significant manufacturers of environmental simulation systems. With our testing systems, various environmental influences can be simulated in fast motion around the globe and even beyond. Whether temperature, climate...

... BIA 7488 Your advantages: • Short-term analyses even for large sample series • Highest analysis quality – confirmed by excellent results in numerous proficiency tests • LIMS-controlled sample management • Standard-compliant preparation and test reports • Convenient online ordering through our business customer portal • Framework agreements possible – and desired!

COLD CLIMATE NETWORK COMPANY GROUP, FROM CENTRAL GERMANY AT YOUR SERVICE An innovative and efficient corporate network specializing in sustainable COLD and CLIMATE TECHNOLOGY in the industrial sector. Our maintenance includes: - Professional inspection and maintenance of your refrigeration and air conditioning systems. - Conducting leak tests. - Assessment of the current condition of your...

... positive results, the production of larger quantities will commence in October 2020. Next Steps FFP 2 and FFP 3 type masks are to be certified in October 2020. In addition to the masks, room air filters and air filter variants for various applications will also be equipped with the patented metal-coated fabric.

... recognized institutes, we have obtained certificates that guarantee the highest effectiveness of our method and our UV radiation devices for air and water treatment and room sanitation, particularly in the sanitation and food industry. In our 35 years of operation, we have conducted numerous trials and tests to ensure the high quality of our products. In particular, our research in collaboration with the University of Siena has led to numerous studies and scientific tests on the effectiveness of Light Progress UV lamps.

...ELB Gastro is a brand of the ELB Group. We are an experienced, dynamic, and internationally oriented company, specializing in the trade as well as the import and export of various economic goods, focusing on large kitchen technology and catering supplies. Our brands include MKN, Stalgast, Hendi, Saro, Hendi, Contacto, Winterhalter, Rieber, Bartscher, and many more. Since 2020, we have also been offering devices/products in the areas of air purification, air disinfection, protective masks, protective suits, as well as rapid tests (saliva tests) and more.

... inventories of the filter systems - Technical consulting and optimization measures on-site - Laboratory tests to determine filtration properties, e.g., particle measurements and residual dirt analyses - Deliveries possible within 24 hours...

... systems, and central gas supply systems for gas technology. From 1979 onwards, this offering was expanded to include the legally required testing services. To this day, we are the only manufacturer that conducts these tests! With the takeover of the company by the Brückmann family in 1998, the well-known company logo was also incorporated into the company name. This marked the birth of eszet...

... cleanliness and quality, we process products from the medical field. Depending on the application area, the requirements for surface and production are very complex. We would be happy to advise you in a personal conversation. High Quality: Tests according to recognized guidelines guarantee flawless goods. Our operation is certified according to current DIN standards. Our laboratory equipment meets the QIB standard. With us as your supplier, you are on the safe side.

Pressure tests with system and quality. We test according to standards. We conduct pressure tests for pipelines, equipment, and pressure vessels according to various regulations for you. We fill and empty. We fill and empty your pipelines and containers with air, nitrogen, water, or your product. We apply pressure. We pressurize your pipelines and containers, possibly also with your product. We...

...Fans, blades, impeller blades for wind tunnels and ventilation systems Turbocharger Technology: Muffler bodies from 400mm - 2300mm size for container ships, cruise ships, and construction machinery drives Tests: Thermal analysis Density index testing VAC test Chemical analysis X-ray testing Surface crack testing Tensile tests on universal testing machine Hardness tests Wolpert + impact hardness testing Dimensional checks on 3D measuring machine...

... our products. We offer: antigen rapid tests, respiratory masks, corona rapid tests, corona self-tests, corona tests, FFP2 respiratory masks, Covid rapid tests, air purifiers, air purification devices, air disinfection devices.

We are importers of model kits and ready-made rocket models, and we manufacture our own model constructions and special accessories. As a reliable and fast supplier of colored smoke generators, we have established a very good reputation in recent years. Our smoke cartridges are primarily used in technical applications to visualize air flows, for leak tests, smoke detector tests, or for theater...