air tests Germany

... include: ISO 14644 ASTM G122-96 ASTM D6361 SAE AMS 0302 The PPM leak test stand is able to be programed to the customers requirement. The powerful in house built software enables exact design of pressure curves, such as holding times and exact pressure increase over time. It is an ideal solution for any sorts of plastic components. This exemplarily displayed test bench can utilize air or nitrogen as a test medium. Please get in touch about any other test mediums. In addition the PPM test benches can perform tests of multiple test units at a time.

...In addition to the usual ICT/FCT procedures, we can also specifically verify each individual manufacturing step depending on the requirements. Efficient testing strategies and final functional tests are an integral part of our quality management. In our testing laboratory, we can conduct automated, static, and cyclic environmental simulations for you, ranging from temperature shock air and temperature shock liquid tests to storage temperature tests and humidity tests. Based on the future operating environment, we compile a suitable qualification program for each product.

...In the fluid dynamics laboratory of our Wasserburg competence centre, we design new fan wheels and turbines and optimise existing systems for performance, energy efficiency and noise emissions. We also develop complete systems of wheels with power units. Our range of tests includes suction operation, pressure operation and also unpressurised measurements. Revolutions up to 40,000 r/min and...

...PC200 PARTICLE COUNTER Measurement instrument for precise air quality control, for example in clean rooms or filtration tests. Mobile environmental measurement device for indoor air quality measurements, for efficiency testing and monitoring of particulate or HVAC filter leaks, and for cleanliness control in industrial processes. The PC200 is an ergonomic handheld meter for monitoring airborne...

...In addition to air technology, we are also a registered specialist company for refrigeration technology. This includes commercial refrigeration as well as mechanical room cooling. To meet the continuously growing demands in handling chemical refrigerants, our masters and mechatronics engineers for refrigeration technology are certified and thus authorized to carry out all work related to the construction and operation of a refrigeration system. This also includes performing the required leak tests.

... you with regard to your testing tasks and, together with you, transfer the entire testing process into a specification sheet. OUR OPPORTUNITIES 2-chamber system air-air Test chamber volume up to 130 liters Temperature range hot chamber 50°C to 200°C Temperature range cold chamber -80°C to -100°C Change between chambers <15 seconds Maximum test material weight 25 kg State monitoring of the test specimens during the test...

...A good way to visually represent air distribution in a room/area is by using smoke cartridges. This smoke enters the room to be tested through the supply air outlets. Upon request, the smoke tests can be recorded with a digital video camera and included in the system documentation. Please contact us.

... HIGH SAVINGS POTENTIAL. Teddington air curtain systems are pioneering when it comes to effectiveness and reliability under demanding conditions. Various tests, including those in our testing facilities, impressively demonstrate the efficiency of our devices with the patented CONVERGO® pressure chamber nozzle system.

... surfaces get not damaged. The blasting process is suitable for the removal of all solid, exposed residues, especially on metallic surfaces of production tools and high-quality machine parts. Blasting granulate and blasting pressure are adapted to the respective application. With the pressure blasting process you can clean extruder and injection moulding screws, blowing heads, moulds and profile tools much faster and more gently than with conventional cleaning methods. In extensive tests with your own workpieces you can convince yourself of the economic efficiency of our system.

... and Control of Chamber Temperature Direct Setting and Control of Relative Humidity Display of Diagnostic Message Storage for 10 user-defined tests Multilingual User Interface Non-aging filter systems for ISO 105-B02 and AATCC TM16 On-rack XENOSENSIV® for measuring and controlling irradiance (in W/m²) and Black Standard Temperature on sample level Selectable temperature control either by Chamber...

... bar to 8 bar bar Rail sizes:15 mm and 25 mm Bosch Rexroth Clamping cycles:1,000,000 Mounting:Vertical Effective direction:Z-axes toward gravity Material:Tool steel; Brake components: Steel Pneumatic medium:Dried, filtered air Operating temperature range:0 °C to 60 °C Application field:Z-axes, Vertical conveyor systems, Jacking applications...

... XPR 3+ provides far superior product protection compared to periodic rate of rise tests. DRIVNG PROFITABILITY BY MAXIMIZING TOOL UPTIME The Transpector XPR 3+ RGA is a field proven quadruple and dual ion source sensor for sputtering pressure range applications. No pressure conversion equipment is required, long lifetime components, and the ability to rapidly detect and diagnose problems combine to maximize tool availability, product throughput and yield. The sensor can be operated continuously from high vacuum to 20 mTorr, without the need for pumps. The Transpector XPR 3+ dual ion...

...-finding processes such as soapy water tests, when used as part of your product leak testing process. By continuously monitoring your environment, you can quickly detect and fix air leaks – reducing your consumption of compressed air and energy to help save your facility money. Key Features: High-end 24/7 acoustic monitoring 64-Digital MEMS microphones placed in a Sunflower Array Integrated visual...

... or influence the operation of the air-bag of the vehicle-own steering wheel with the actuator mounted. With the drive disabled, the vehicle can be driven by the driver. Test procedures can be created and executed in stand-alone operation. The system also can be integrated into a host automation system. Different configurations and options such as additional actuators (throttle, brake, clutch shift), additional operation modes and different integration interfaces are available. The steering system also cam be linked to the Autopilot System for fully automated driving of...

...Features: Fans of the ARMO-A series are fire-resistant fresh air and smoke extraction fans. All models are certified according to EN-12101-3 and CE, and they meet fire protection tests (2 hours at 300-400°C). The Armo-A series offers 2-, 4-, and 6-pole motors, which have an IP55 protection class and insulation class H. The fire-resistant housing is made of solid galvanized steel sheet and is...

...Types of construction: - Brake dynamometer with eddy current brake (air or water cooled) - Low inertia hydrostatic dynamometer - Dynamometer with water vortex brakes - Regenerative dynamometer, 4-Q mode (low inertia) Areas of application: research, development, quality assurance, and training.

...³ Temperature range: -70 to +180°C II +50 to +300°C Humidity/climate range: 5 to 98% relative humidity Temperature change rate: Cooling: 2 to 15 K/min II Heating: 2 to 15 K/min Control/regulator: C-Touch screen Digital display of set and actual values, 3 analog channels visible simultaneously, graphical curve progressions Options: Pipe penetrations Ground-level loading Access ramps Machine unit next to or on cell ceiling External air-cooled condenser We would be happy to advise you personally and equip your walk-in test chamber according to your requirements.

...among other applications. Additionally, we supply galvanized or coated versions manufactured in small and large series, in pre-assembled units that meet specific requirements for tightness, air guidance, material, and aesthetics. Simply ask us for relevant laboratory tests or performance certificates.

...To conduct airtightness tests in large buildings, simply combine several BlowerDoor fans (BlowerDoor MultipleFan): With up to three fans per door opening, Germany’s leading measuring system for airtightness easily masters even large air-flow rates! The BlowerDoor MultipleFan system consists of three BlowerDoor fans and two digital DG-1000 pressure gauges, and was developed for airtightness...

...Vacuum systems, vacuum degassing, batteries, accumulators, medical components, process control - degassing in a vacuum Using vacuum degassing, unpleasant taste or odor nuisances can be removed, making them taste-neutral. Altitude simulation For air transport, it is essential to conduct tests and simulations at a pressure < 800 mbar, as pressure equalization occurs in cargo holds, but not all...

... tests - Supply of spare parts and replacement components according to external drawings or our own designs - Design for boiler modifications and conversions using 2D and 3D CAD systems - Support for boiler and power plant investment projects - 24-hour on-call service Processed components: - Steam generators - Low/High-pressure heat exchangers - Apparatus - Vessels - Piping - Air and flue gas systems - Soot blower systems - Feeding/waste disposal - Ash removal/wet slagging - FGD systems - DeNOx systems...

... resistance, air tightness, and weather resistance according to DIN 18542. Hannoband-BG1-M For particularly demanding and larger joint widths, the use of Hannoband-BG1-M with HANNO membrane technology is recommended.

... - Pressure dependency testing - Temperature behavior investigation - Repeatability measurement - Measurement capability determination (cgm, cgk) ...with the measured variables: - Flow - Pressure - Temperature - Humidity - Current - Voltage - Force - Distance - Medium: Air – other gases upon request!

...We test products for their functionality under various environmental influences such as temperature, climate, air pressure, water, dust, as well as mechanical stresses. We simulate a variety of predictable environmental conditions in our laboratories and check whether your product can withstand these and will function reliably in its later application environment. Lifetime tests replicate the...

...Visual tests in the laboratory and semi-technical scale Visual tests on a semi-technical scale can be conducted with us using an ATP 200 air classifier from Hosokawa Alpine. This classifier excels particularly in the fine particle range and allows for separation particle sizes down to approximately < 5 μm. A closed-loop system with our model mill is also feasible. In this setup, the coarse...

... competitive price, have convinced our customers since the filter's introduction. Through continuous improvements, Infastaub optimizes and expands the functionality of the AJB, such as its pressure shock-resistant design up to 1.0 bar overpressure, which has been demonstrated in explosion tests. A special version for low temperatures down to -40 °C is also available, as well as a version for food applications, where all product-contacting components are approved according to Regulation EU 1935/2005 and EU 10/2011.

... Values: Ball speed, accuracy <1 % Dimensions of the testing device (3385 x 2855 x 1408) mm (WxHxD) Connection Media 230 VAC, 50/60Hz Dry compressed air, 5bar Optional Accessories Casting device for DIN-compliant ice balls Freezing device for ice balls Compressed air supply Laser targeting device Manual positioning or with electric positioning system...

... as ABS and PVC, polyester, Styrofoam, wood, felt, leather, fabrics, textiles, as well as metals like aluminum, steel, etc. 3M™ Fast Tack 1000NF contains no volatile organic compounds (VOCs) according to tests following EPA Method 24. Application: Bonding upholstery foam to furniture and vehicles, office partitions, securing insulation materials in vehicles, heating systems, ventilation, air conditioning, and appliances. Size: 18.93-liter bucket...

...Tool No.: 1583/292 Operating Weight: 47.11 kg Raw Weight: 44.91 kg Diameter: 719 mm Alloy: AIZn10Si8MgK This top plate is used in an air suspension system employed by the railway. High demands are placed on the mechanical properties as well as the casting structure. These properties are verified through tests (such as X-ray, crack testing, etc.) in an accredited testing laboratory. This casting...

...drinking water pipes with air according to DIN EN 806-4 and ZVSHK guidelines, differential pressure tests up to 1 bar, testing of wastewater pipes according to EN1610, ALL no problem. Documentation via IR interface to thermal printer on document-compliant long-term stable thermal paper, detailed reports in DIN A4 format or as PDF reports via PC software.