part loads Germany

... of their respective manufacturers or patent holders. Furthermore, KB Schmiedetechnik is certified by 5 shipbuilding auditors: American Bureau of Shipping (ABS) Det Norske Veritas (DNV) Nippon Kaiji Kyōkai (ClassNK) Bureau Veritas Lloyds Register Forged Parts: up to 130Kg raw part weight Maximum Length: 600mm All Steel Grades: Stainless Steel, Alloyed Steel, Duplex, Super Duplex, Carbon Steel, Nickel Alloy, Low Tempera Special Steels: Monel, Hastelloy, Incoloy, Inconel, Alloy, Duplex, Superalloys, Nickel, Chromium, Vanadium, Titanium...

... transport loads weighing up to 4 tons easily and safely from A to B. DBM battery magnet -Universal application -Compact design -High safety and reliability -High load capacity -Loads are always safely picked up -Automatic charging control Universal application -Outdoor operation also possible with IP43 enclosure (power source, charger and control elements combined into one unit...

... up to 1500 mm is possible upon request. With grooves on the outer profile and connection dimensions compliant with DIN ISO 15552, the SLZ 63 can be flexibly integrated into a wide range of applications. It allows for the adaptation of all standard accessories with a part length of 63, as well as use with customer-specific components. The drive concept for linear actuation can be selected as desired. Depending on the application, a stepper motor, three-phase motor, or servo motor can be used. The motor housing can be optionally rotated in 90° increments according to the mounting conditions.

...When to use piston rings? When piston rings with excellent wear properties are required When simple assembly is of great importance When high edge loads occur When tailor-made solutions based on iglidur® materials are required When not to use piston rings? When the piston rings should seal simultaneously When different diameters should be covered by one part Before: with piston rings: Why...

... voltage levels Construction and Operation Small conveyor devices are tuned to resonance proximity two-mass oscillating systems. The drive part contains the elements for generating oscillation, such as electromagnets and leaf spring packages. The oscillation amplitude (double amplitude) defines the maximum height of the micro throw and thus a theoretical conveying speed. The actual conveying quantity...

... occupational accidents as part of the revision of standard EN 1870-19 prior to the amendment of the Machinery Directive 2006/42/EC. This was awarded the EURO Test Prize of the EU Builder's Trade Associations. Since the new machinery directive went into effect in 2010, all new circular building site saws have been equipped with the newly improved safety hood and other essential safety components and have been delivered exclusively in this version. Power:4200 W Three - phase current:400 V cutting height:153 mm Table size ( L x B x H):1110 mm x 750 mm x 850 mm Weight:153 kg...

... connections suitable for batteries, loads, or chargers. This provides you with maximum flexibility and scalability for your system. - Part of a Larger System: As part of the Lynx distribution system, the Lynx Power In allows for the integration of additional modules such as DC connections, distributors, fuses, and battery monitoring. - Robust Construction: With an ABS housing and a busbar made of tinned copper, this product is designed for durability and reliability. Product Number:LYN020102000 Manufacturer:Victron Energy BV Stock:11 Housing Dimensions (hxbxt):290 x 170 x 80 mm Device Weight:2.1 kg...

... range of up to 1,000 mm. Optionally, we can also provide the MechSpace with a larger lifting range. The MechSpace is used whenever large off-center moments need to be absorbed. This is the case, for example, when a raw part needs to be inserted into a machining machine or when seats need to be installed in vehicles. Furthermore, the MechSpace is employed when many degrees of freedom are necessary. Typical application areas include, for example, the loading of CNC machines, handling and dispensing of containers, complex assembly processes, etc.

...Replacement Vitam 4243 zinc-free HLP hydraulic oil Description Aral Vitam MW 46 is a zinc-free high-performance hydraulic oil of the "HLP type" and is particularly suitable for use in hydraulic systems with hydrostatic drives in which high thermal loads occur. Advantages - complies with the requirements of DIN 51524 part 2 "hydraulic oil type HLP" and ISO 6743/4 "hydraulic oil type HM - zinc-free...

...Confectioning and Combinable Energy capacity max. 15.0 Nm/cycle Stroke 6.5 mm Tailor made damping material in pad format: SLAB damping pads are made of a viscoelastic PUR-material. They absorb impact loads extremely effectively and are also suitable for insulating or damping vibration. The pad series SL-030 to SL-300 are quickly adapted to the relevant type of application. This is in part...

... coatings for lifting slings and protective sleeves are used daily for lifting and moving sharpedged loads. For the safe and economical turning of heavy and difficult loads, secutex has now developed the turning slings with the new secuWave coating (patent pending). The unique feature of the secutex turning slings is the new wave profile. It combines the wellknown advantages of secutex coatings – excellent cut resistance and flexibility as well as a very high wear and abrasion resistance Option:secutex turning slings equipped with C-hook with quick...

...They only take axial forces in one direction. Radial loads are not permissible. They are disassemblable, allowing for separate assembly of the shaft washer, cage, and housing washer. Since at higher speeds and lower loads the balls tend to run out of the groove due to their centrifugal force, a minimum axial load is always required. Essentially, these are the series 511, 512, 513. IBC axial deep groove ball bearings are manufactured with normal tolerances PN, as well as with higher accuracies P5, P4 according to DIN 620, Part 3.

... slide extends the life of the press and the die. Overview: ● Press capacity: 6,000 - 30,000 kN ● Part size: large ● Slide kinematics: link ● Application: as a single press system either as progdie or transfer mode, as well as a press line Description and benefits: ● The outside located pressure points and a long 8-fold slide guiding system well compensate off-center loads, spare press...

... with top sheet applicator is particularly well-suited for industries such as food, logistics, chemicals, pharmaceuticals, and retail that seek a robust and reliable packaging solution for their products. The machine operates fully automatically, ensuring even and stable wrapping while the top sheet covers the upper part of the pallet, providing all-around protection. The control system allows...

... carefully chosen for each rubber seal, as each rubber molded part is subjected to different stresses. The leakage of liquids can have devastating consequences. Therefore, the sealing rubber must not tear even under strong friction. Often, seals are only approved for use with an official test number. This allows for research in case of an incident to address potential errors in the future. Rubber seals are also suitable for applications with high mechanical loads or extreme temperature influences.

...Especially for the bending moment transmission designed 3 part Locking Assembly with reduced stresses in the Locking Assembly itself. Special Features - Through the long and flat cones one Locking Assembly RfN 7515 can transmit torques and axial forces and bending loads. At mounting is a small axial movement from Locking Assembly and hub. Bending moment and radial loads – combined loads can be...

... Nickel is one of the most efficient and reliable coating technologies for numerous industrial applications. Chemical Nickel for optical functional surfaces: X-ray amorphous layer thicknesses up to 800µm. Chemical Nickel for high corrosion stress. Maximum part size: 2000 x 1400 x 500 mm.

... tensioning element (ratchet) and a strap. They are used for securing loads and therefore do not require connecting elements like eyelets or hooks. Two-part lashing belts consist of a fixed end, a connecting element, a tensioning element, and a free end, which is also equipped with a connecting element. Polyester lashing belts can be used in a temperature range of -40°C to +100°C. Even caustics and acids are generally not a problem, depending on their concentration and duration of exposure.

...3M Scotch-Weld DP 110 is a low-flow, two-component construction adhesive with a short working and handling time of 8 to 10 minutes. The 3M Scotch-Weld DP 110 adhesive is particularly well-suited for metal bonding and very effective for plastic bonding, making it suitable for both static and dynamic loads. The application of the 3M Scotch-Weld DP 110 adhesive is done using an EPX device and mixing nozzle.

... bearings, can also accommodate radial loads and high speeds. They are high-precision units made up of stable outer rings, ball races, and one- or two-part inner rings. Type designations: 7602.. /7603.. (double-sided acting, restricted tolerances, with pressure angle α = 60°) 2344.. (double-sided acting, restricted tolerances) ZKLN.. (double-sided acting, with lip seal or gap seal, optionally paired) ZKLF.. (double-sided acting, with lip seal or gap seal, optionally paired, screwable) Axial cylindrical roller bearings ... consist of...

...Support arm for hose systems, e.g., for ventilation or anesthesia devices. Available with 3 or 2 joints. Safe and easy adjustment and locking via eccentric lever. Flexible front part with 6-fold hose pendulum. Holding pin made of stainless steel for holding claw.

... to DIN EN 61340, equipped with sanitized treatment. Certifications: according to CE, DIN EN 345-1, Safety Class S2. Additional markings: Protection against water penetration, protection against water absorption. S2 protection class according to EN ISO 20345 - Safety shoes with toe cap for high loads, whose protective effect against impact is tested with an impact energy of at least 200 Joules and...

...Everywhere that stamped parts are subjected to high mechanical loads, laser-welded joints are a suitable option. QB has developed expertise in this area over many years. Quittenbaum employs both infrared and green laser technology. As a development partner for laser welding heads from Trumpf, we have succeeded in creating a compact design for the welding heads and placing up to six laser welding points on a stamped part. With special testing devices, the load capacity of the welding points is ensured throughout the production process.

...- Internal pressure verification according to EN13480, ASME B31.1, ASME B31.3, AD2000 - Pipe statics, pipe-2 calculations - Stress calculations - Stress analyses according to EN13480, ASME B31.1, ASME B31.3 - Determination of support loads - Determination and assessment of connection loads - Notch verifications - Flange calculations - Steel construction statics - Description, monitoring, visualization...

...In many industries, testing with real ohmic loads is an important part of the development work. Whether for testing power supplies and power devices, electric drives, or other electrical aggregates, FRIZLEN offers a suitable type of resistor for a wide range of testing fields. Even in the educational sector, such as schools, universities, or vocational training institutions, you will always be...

... primarily flat. A trough version with three-part support rollers is typically used for bulk materials. The conveyed material falls into a transfer hopper at the discharge station, where it is directed for further processing. Belt conveyors that operate in two directions are called reversible belts. Through manual control, for example, two silo groups can be fed.

... pallet truck/forklift. An absolute all-rounder - from the outdoor area of the craft business to the hygiene shelf! Vacuum Deep Drawn Part Dimensions: 1000 x 1200 x 150 mm Material: PE-RE Color: gray Temperature Resistance: -30 °C to +60 °C Weight: 23 kg Load Capacities: Static: 4000 kg Dynamic: 1200 kg In the Shelf: - kg Size: 1000 x 1200 x 150 mm Weight: 23 kg Temperature Resistance: -30 °C to +60 °C Load Capacity (Static): 4000 kg Load Capacity (Dynamic): 1200 kg...

... occupational safety, as part of the manufacturing process, or for hygiene reasons: We are happy to develop a proposal for you on how such an enclosure could be designed ergonomically and technically to effectively encompass your machine. This also includes the appropriate base frame that optimally connects the machine and the enclosure. Strong vibrations or high loads can also be easily absorbed with suitable profile dimensions and rigid connections.

... frequency inverter The advanced motor design allows higher speed and torque in combination with a smaller motor design and lower losses. Even today the challenges of the future, for example efficency according IE5, are achieved. The synchronous motor technology in a classic standard motor housing fulfills the economic requirements and making it ideal for speed controlled operations or applications with high duty cycles and/or high partial loads. Efficiency class:IE4+ Size:90 Material:Permanent magnet Technology:synchronous Speed:variable Torque:constant...

... stationary container handling systems are equipped with robust forks and a weighing unit, if required. Container lifter with grinder lift column Type FTHSK 1000 G5-2 lifting weight 1000 kg height 6 m Design: lifting, inverting, swivelling, grinding - all motorized Container Wash Station high pressure, 150 bar warm-cold water rotating injection nozzle validation possible Container lifter for rectangular containers lift and swivel column Type FTHS 1000 G4 loads up to 1000 kg column height 5.0 m Design: motorized lift manual swivel Emptying and charge weighing Emptying and charge weighing system for..