mixed cement Germany

...Vita RDP® is a spray-dried, free-flowing powder that redistributes into an emulsion when mixed with water. It forms a flexible and adhesive polymer film upon drying, offering good storage stability and flowability. The powder can be pre-mixed with cement, fillers, and additives, simplifying on-site preparation and enhancing efficiency and quality in construction. Product Composition - Polymer...

...The cement-based joint mortar "Deco-Flexfuge" from Knauf is suitable for grouting all ceramic tile and slab coverings, both indoors and outdoors. It is particularly recommended for use on porcelain stoneware, stoneware, and terracotta. The treated surface can be walked on after just 3 hours; the joint is fully stable after 24 hours. 5 kg of powder should be mixed with 1.2 to 1.4 liters of water...

... mixing plants, thanks to aggregate bins equipped with dosing belts, it’s possible to adjust material flow rate by means of frequency inverters. Cement flow rate can also be precisely adjusted by a screw equipped with frequency inverter whilst the water flow by a proportional valve. All materials are mixed passing through ELKON C200 mixer continuously according to the recipe and flow speed.

... setting dry mortar with cement according to DIN 1164 and with high-quality fillers/additives, which is mixed with clean water. It is used for bonding the SILCA® 250KM insulation boards in the area of constructive application in the outer (cold) section of the fireplace and tiled stove. Please note that for the processing of the SILCA® 250KM boards inside the stove (for the required fire and thermal protection of the wall to be protected), SILCACON adhesive must not be used, but our SILCADUR-HFS adhesive, which is approved for construction.

...MIXACO Container Mixer Vortex™ It is suitable for any industry where different recipes need to be mixed in quick succession, resulting in frequent mixer cleaning. As the transport container and mixer head are separate units, products can be conveyed to the next processing station without loss of time. The design of the MIXACO Vortex™ mixer, which was robust from the outset, is continuously...

...Pre-mixed, water-permeable 2-component joint mortar based on epoxy resin. Suitable for re-jointing and joint renovation of natural stone, concrete, and clinker paving surfaces in pedestrian zones, garden areas, walkways, courtyards, garages, driveways, and street pavements. For both old and new paving made of natural stone, concrete, or artificial stone. Designed for light to medium loads. Properties: - High compressive and flexural strength - Good edge adhesion Delivery form: 25 kg plastic container (24.4 kg + 0.6 kg)...

...- welded steel construction, plastic-coated - all sizes with protective ring - prevents damage to the mixing container - with 3 mixing arms, right or left twisted Materials: recommended for liquid to viscous 1- or 2-component materials such as mortar, ready-mixed plaster, concrete, screed, lime, cement, sealing and filler compounds, slurries, fiber-containing materials, dispersions, paints, glazes, coatings, adhesives, bitumen, casting compounds, lead white, cement slurries, etc.

...Spray Mortar/Spray Concrete, hydraulically setting, cement-based, silica-modified factory dry mortar, for indoor and outdoor use, for walls and ceilings, concrete repair Suitability: Ready-mixed material for producing spray mortar for concrete repair in drinking water applications. l For pneumatic transport in dry spraying method. Specification: According to DIN 18551, DIN EN 206, DIN 1045...

...FTK Förderband Technik Kilian GmbH has the second largest range of elevator buckets. With more than 400 bucket types and sizes, we have a bucket for every product and application. Elevator buckets in regular & stainless steel (deep drawn or welded) Synthetic elevator buckets (nylon, HDP or polyurethane) Elevator buckets for agricultural applications (e.g. grain, seed, mixed feed, sugar) Elevator buckets for industrial applications (e.g. cement, gypsum, aggregates, coal, artificial fertiliser) ...

... collaborate with partners who develop appropriate formulations and foaming agents, allowing us to offer a complete solution, including the production of processing machines. Functionality: The material (water, cement, sand, fly ash, styrofoam, etc.) is pre-mixed in the cone mixer. Subsequently, foam is added via a foam generator. After an appropriate mixing time, the material is pumped to the processing location using a screw pump. Concrete with bulk densities of 100 – 800 kg/m³ is possible here.

...As a base for other floor coverings, we install flow screed or cement screed for you. Flow screed is mixed directly on-site from dry construction materials and water. You can walk on the floor again after just 2 days, and after about three to four weeks, you can apply floor coverings such as tiles or laminate. Flow screed has a slightly longer drying time and is usually installed in...

... capacity) • automatic water supply (storage tank 2000l) • 4 units of feeding conveyors, 1 unit. • Discharge conveyor for concrete 13.50m • 1 unit of chemical pump for soap-like chemical additives • Cement screw 5m long approx. 50 tons/hour • Weighing device, PLC control - automatic/manual selectable • Touchscreen, language selectable - German, Russian, English, etc.

...Mixed construction waste can contain non-mineral materials such as wood scraps, plastic, foam, film, hard plastic, Styrofoam, cement-bonded wood fiber boards, gypsum, or aerated concrete, unlike construction debris. Hazardous waste (special waste) must not be disposed of together with mixed construction waste.

...Painter's White 22 white, matte for exterior and interior, weather-resistant according to VOB, Part C, DIN 18363 DIN EN 13300: Wet abrasion class 2, contrast ratio (covering power) class 2 at 6 m²/ltr. Application area: On neutral plaster and concrete surfaces, masonry, and fiber cement boards. Also suitable for durable interior coatings, e.g., in stairwells, garages, workshops, etc. Product advantages: highly covering, quick-drying, water vapor permeable, easy to clean, good filling properties, washable, can be mixed with all solid and tinting colors. Weight: 15 kg...

...for cleaning profiled belts and for fine cleaning - Holder with spindle device - Brushing in various designs - available for all belt widths - Particularly suitable for cleaning profiled belts and for fine cleaning - Rotating brush powered by an electric motor - Sturdy holder with spindle device to ensure optimal positioning on the belt - Brushing available in various materials, including polybutylene terephthalate (PBT), stainless steel (VA), and mixed bristle (VA/PA) - Available in all belt widths - Application areas: extensive (e.g., food industry, coal power plants, cement plants)...

...AT SCHWEISSTECHNIK GmbH, we have been a competent partner in the field of welding technology for wear protection and maintenance and repair for recycling and shredding plants, gravel and sand pits, quarry and mining operations, asphalt mixing plants, steel and ironworks, ready-mixed concrete and cement plants, as well as thermal and biomass power plants and incineration facilities for over ten...

...up to 50 tons total weight in exceptional dimensions including assembly by our teams • Concrete with white cement • Exposed concrete up to SB4 • Finished surfaces, e.g., washed, blasted • Profiled surfaces with standard molds or custom formwork design • Surfaces with embedded materials, e.g., tiles, clinker, or slabs of marble, granite, etc. • Surfaces with mixed materials, e.g., stainless steel shavings, glitter, etc. Total weight: up to 50 tons Exposed concrete: up to SB4...

... meet fire, sound, and moisture protection requirements. They are made from softwood chips and Portland cement, supplemented with mineralization agents and water. In a special process, the materials are mixed, spread, and compacted. After ripening and climate conditioning, the boards are cut to meet customer specifications. The boards are free from formaldehyde and contain no harmful substances...

... facade panels. Depending on the application, our self-compacting concretes are free from plastics, fibers, and reinforcement. The casting compounds are mixed with water, filled into molds, and processed without vibration. They harden without energy input, solvents are not required, and the concrete can be easily recycled. We supply both finished products such as machine components and ready-mixed concrete for immediate use. We are also happy to advise you on setting up your own production facility for UHPC with the binding agent Nanodur Compound from Dyckerhoff GmbH.

... cement. In addition to our standard products such as Portland, Portland composite, and blast furnace cements, we also produce various special binders for specific projects. A combination tower at our Karsdorf plant allows us to tailor cements specifically to the individual needs and requirements of our customers. Besides bulk goods, we also sell bagged cements for specialty retailers and DIY stores. Load-bearing binders and other products for soil stabilization complete our offering.

... disposal, old wood disposal, waste paper disposal, old tire disposal, aluminum disposal, asbestos disposal, asbestos cement disposal, car wreck disposal, battery disposal, mixed construction waste disposal, construction debris disposal, picture tube disposal, metal part disposal, sheet metal disposal, brake fluid disposal, wire glass disposal, stainless steel disposal, precious metal disposal...

Manufacturing and distribution of masonry mortar, wet mortar, ready-mixed mortar, flow screed, anhydrite flow screed, cement flow screed, liquid insulation - Poriment...

... missing nuance, and the correct form in construction, restoration, and DIY projects. Our portfolio includes pigments as pure metal oxide colors, mixed mineral colors, and blended earth colors. Additionally, we offer organic chemical color pigments. Our portfolio also includes gypsum fillers and special cement. Our product catalog. Our Brand The product brand KECO is associated with a comprehensive range of ceiling and wall paints, gypsum and cement fillers, as well as earth colors and color pigments. The product range can also be found under other brand names in the market.

Heidelberg Cement is one of the leading companies worldwide when it comes to cement, concrete, and aggregates. The products from Heidelberg Cement are used for various construction projects, ranging from houses and transportation routes to commercial and industrial facilities. Different variants of fresh and ready-mixed concrete products are available to customers, depending on the application...

We define microcement as a continuous low-thickness coating, referring to a hydraulic mortar made from cement, aggregates, additives, pigments, and mixed with resins. These resins provide it with strength and flexibility. Microcement is suitable for floors and walls both indoors and outdoors in: bathrooms, kitchens, swimming pools, stairs, and furniture. It can be applied over surfaces such as...

Roofing materials, Interior construction, Shell construction, Insulation materials, Building elements, DIY store, Yard & Garden, Heating oil...

Ready-mixed concrete in Worms, Alzey, Ingelheim, Wiesbaden, Bad Kreuznach, Bingen, Östrich-Winkel, Grumbach, Niederwörresbach, Ellenberg, Idar-Oberstein, Mainz, concrete, steel fiber concrete, flowing screed...

Bulky waste, construction debris, mixed construction waste, waste containers, bulk material deliveries, disposal and services in the Regenstauf-Regensburg area and surroundings. Gravel, sand, and crushed stone also available in small quantities.

Ready-mixed concrete, concrete, concrete pumping service, basalt, slate, sand, gravel, crushed stone, rubble, water building stones, bulk materials in Oranienburg and Oberhavel, bulk storage at www.sand-splitt.de.

Provider of custom-made and newly mixed decorative stone plasters, stone carpets, and effect wall paints tailored to customer specifications.