heating system Germany

...Klöpper Therm electric flow boilers are used for generating hot water in heating units for direct heating, storage operation or for Power to Heat systems. As an alternative to other energy types in new buildings or when converting central heating units, these boilers offer a universal range of applications radiator heating, floor heating, mixed systems or bivalent operation with other energy types. Depending on the relevant operating conditions of the energy supplier, the boilers are used for direct or storage heating by utilising free electric power during off peak times.

...{"features":["Environmentally friendly steam generation from available waste heat","Perfect complement for energy concepts with combined heat and power","High efficiency through effective bundle heat exchanger and thermal insulation","Additional efficiency gain through optionally integrated economizer","Coordinated, modular system for easy planning and quick installation"],"specifications":{"max...

...Even the best system needs a suitable controller. With our user-friendly and proven control concepts, you always have your production process in view and, above all, “under control” understandable, functional, reliable, clear and made for users. And Our wall thickness regulation saves raw materials and makes your production more sustainable!

...System with 8 individual heating chambers for 4 x 200-liter barrels each, fully made of stainless steel for the pharmaceutical sector...

...In winter, it can quickly lead to significant icicles forming on gutters due to melting water. If an icicle breaks off, it can cause life-threatening injuries to people walking underneath. This is reason enough to ensure adequate frost protection for gutters, not to mention the liability issues, especially for buildings that are directly adjacent to public walkways. A gutter heating system is also a reliable frost protection measure to simply avoid damage to the gutter itself. That alone is frustrating enough, as repairs can become very expensive depending on the height of the roof.

... electrostatically dissipative material ▪ Equipped with a permanently installed capillary tube thermostat (controller / limiter unit) ▪ Usable at low temperatures down to -40°C Note: Please note that before commissioning, the entire system must be inspected and approved by an expert! This item is not an ATEX-certified complete system and is supplied with type test certificates for the electrical components used!

...Numerous production processes require heating and cooling systems. They often rely on the precise adherence to temperature gradients, such as in a printed circuit board production facility or in composite material manufacturing in aerospace. As an expert in process heating, we are the right partner for you for all questions regarding the temperature control of your process systems. All NESS...

...Screw-in heating elements for water heating with photovoltaics. Suitable for hot water and heating buffer storage with PV systems. Continuously adjustable power output, depending on the available surplus electricity from the PV system. Connection 230/400V 3(N). High-quality industrial quality: tubular heating elements made of Incoloy 825 (2.4858), thread G 1 1/2" and connection housing made of...

... temperature measurement. This allows for a maximum of 96 temperature circuits to be monitored using the vtc 4-way distribution system. In conjunction with the standard continuous heating control, a highly energy-efficient and homogeneous temperature profile is achieved at the surface of the mold nest, as well as with continuous cooling using a motor valve. The pumps can optionally be operated with...

... line and integrated heating, which can be configured for specific kiln applications. Applications: Cement and lime production • Paper manufacturing • Metal processing, chemical industry, and waste incineration...

... Lights, 2x Light Switches, 4x Sockets, Cables, Cable Channels, 1x Fuse Box, 1x 16 Amp Power Connection, PVC Flooring, Corner and Edge Trims, 4x Crane Eyes Additional Options: - Electric Heating including Installation €350 Container as Desired Our System Module Containers are produced without weld seams and then coated with COIL COATING. The outer walls are made of galvanized steel sheet, which is painted and foil-coated.

... The central agitator has a low energy requirement to ensure mixing and ensures optimum biological digestion. This is helped by the smooth internal walls (largely without any internal attachments) which prevent substrate deposits. As an option, an external heating system can be added to the digester, ensuring an even temperature distribution thanks to the good heat transfer properties of the steel. MAXIMUM LEAK TIGHTNESS AND PRACTICAL ON SITE CONSTRUCTION With Lipp digesters you will benefit from over 50 years experience in plant and tank construction.

...The controller is a fieldbus device for the control of up to 7 power modules from the modular heating System from Kendrion, which are directly connected via the module bus. In addition to system monitoring, the controller can also control or regulate the individual output channels of all power modules. Actual temperature values can be delivered directly via CAN fieldbus or provided by a higher...

...For heating system, made by casting and machining, material annealed cast iron KTH35010, sizes Ø46mm x 15mm, weight 0,1kg, annual demand 30.000pcs...

...Modular Prefabricated Chimney The modular prefabricated chimney is a flue system designed for all standard heating appliances operating in both dry and wet (condensing) modes. It is an evolution of the proven modular chimney and impresses with its versatility and the well-known simple construction, thanks to the modular design of the ready-to-handle assembly blocks. The system is manufactured in diameters ranging from 130 to 200 mm.

...Neutralization system Neutrakon® for the neutralization (pH value increase above 6.5) of acidic condensates from gas-fired heat generators (condensing boilers) and/or flue gas systems up to 1000 kW. With Booster Technology for extended service life. The Premium Line consists of 6 systems for the neutralization of acidic condensates from gas condensing systems with a power output ranging from 25...

...The combustion air pre-heater withdraws the residual energy from the flue gas and therefore pre-heats the combustion air of the boilers. This considerably increases the level of efficiency of oil/gas fired boilers and extends the life of the units. The combustion air pre-heater is designed as a bare-tube heat exchanger. This facilitates high heat transmission to the combustion air and guarantees easy cleaning of the heating surfaces.

... even on construction sites and uneven terrain. On the other hand, you do not need an external oil tank due to the integrated fuel tank. The oil heater blower is originally "Made in Europe" and comes standard with an electronic flame monitoring system, a safety thermostat for overheating protection, and fully automatic cooling.

...Heating Centers in Containers BBS Heating Centers in Containers are the most cost-effective and fastest solutions for any heating system. We manufacture our steam, hot water, warm water, or thermal oil boilers to fit container specifications. The heating center is fully assembled, installed, electrically wired, and tested. For steam systems, water softening and the feed water tank with degasser...

... thermal shape stability • Low linear shrinkage • Finest molding accuracy • Easy pouring of small and large quantities (1kg – 2500 kg) ALWA MOULD D molds are suitable for a temperature range of up to 135 °C; short-term loads up to 180 °C are possible, taking into account the reduced compressive strength of the mold due to temperature. To regulate the temperature of the mold during the production process, copper pipes or heating elements can be cast in at a distance of 3 – 4 cm from each other and 1 – 2 cm from the model surface.

... is done using a compressed air pulse via solenoid valves. This method of cleaning is very economical, as it is demand-dependent based on differential pressure measurement. The installation and removal of the filter bags are carried out without tools from a mounting platform. Systems that operate in frost-prone areas are equipped with valve heating and an additional cover for the solenoid valves. The required piping layout is designed individually. Hellmich exclusively uses branded components for electronic or electrical assemblies...

... washing, robot-guided high-pressure washing and deburring with a maximum of 450 bar. Bath Maintenance: Coarse dirt basket filter, full-flow filtration, gravity oil separator Heating: Electric or technical heat Installation Area: L x W x H = 3,000 x 2,000 x 3,000 mm...

...The heating and control technology Gelsenkirchen GmbH never installs a heating system without having checked it multiple times.

...Hot water heating in a storage loading system with pre-regulated heating circuit, a regulated heating circuit, or primary return cooling Manufactured in compact/module design mounted on a vibration-damping and sound-insulating steel frame with piping made of St37.0 P235 TR as well as fittings and connection pieces St37.0, with drinking water side made of bronze/stainless steel, in accordance...

BEKA produces climate comfort Surface heating and surface cooling with capillary tube mats, copper pipe systems, or single pipe technology BEKA manufactures components for surface temperature control. Combined ceiling heating and cooling, underfloor heating, or wall heating, thermally activated with BEKA components, ensure energy-saving and pleasant room temperature in all types of buildings - f...

... Controller:Pilot ONE (E-grade "Professional") Safety class:III / FL Protection class:IP20 Dimensions (W x D x H):460 x 604 x 1465 mm Weight:215 kg Heating capacity:3 kW Cooling capacity:250 200 100 0 -20 -40 -60 -80 °C 2,3 2,3 2,3 2,2 2 2 1,4 0,3 kW Cooling machine:air-cooled Refrigerant 1. stage:R507 (1,8 kg) Refrigerant 2. stage:R23 Pressure pump max.:40 l/min ; 0,9 bar Pump connection:M30x1,5 AG male...

...Supply/Return Line for Heating Systems Application Area: Heat Pump, Condensing Systems...

...Smit Industrial Heat Treatment has 50 kVA resistance machines that can perform heat treatments both at our facility and on the customer's site. Resistance heating is particularly suitable for heating small to medium-sized round or seam joints starting from 0.5 inches in diameter and for preheating. Additionally, it offers the following advantages: - Flexible application - Compact machine...

...Insulation mats for warm water underfloor heating, coated with a tear and water-resistant composite film Available in thicknesses of 20mm-50mm Advantages: Thermal conductivity group 045 Age-resistant and rot-proof Thermal and moisture protective With a grid print of 5cm Easy to process Application area: As insulation under the screed for underfloor heating Technical data: Dimensions (net): 1000 x 10000 mm Traffic loads up to 4.0 KN/m Thermal conductivity: 0.045 W/m.K Building material class B1, DIN 1402-1 Thickness mm:: 40-3 mm...

... Your advantages: - no dripping or thread pulling due to programmable retraction - direct linearity between spread rate and speed - constant dosing volume even with fluctuations in density, viscosity and temperature - reliable dosing without heating the medium - drive with servo or three-phase motor - easy programming of quantity and speed - low maintenance, quick disassembly - free inlet possible, as self-priming mode of operation...