flow control valve Germany

... variant available. Areas of application: Switching speed not critical, suitable for long-term switching states, high flow rate, low susceptibility to particles. Lifespan: 50,000 switching cycles, easy replacement of the actuator, high-quality materials, and reliable sealing. Technical Data: FSA Motorized Ball Valve Set Stainless Steel 304 3/4" 230V AC Actuation: Direction control Switching time...

...This series comprises valves with two connections that are operated by an electric motor. They are characterized by the fact that the valve stroke can be adjusted steplessly and held in place by a motor using a setpoint signal (420 mA or 010 V). This makes this series particularly suitable for precise dosing applications, as the servo motor reliably processes setpoint deviations of 1%.

... plastic. The hygienic inclined seat valve is also certified in accordance with the technical instructions for air quality control (TA-Luft) according to the ISO 15848-1 standard and can be supplied upon request with an acceptance test certificate in accordance with EN10204 3.1. Size: DN15 - DN50 Pressure: PN 40...

... continuously measures the water parameters and keeps them within the desired range. It controls a variety of actuators and control elements and is easy and intuitive to operate. Components of the EASYPRO CS (mounted on the base plate): . Multi-channel controller TOPAX® MC . Measuring cells and measuring cell fittings . Measuring water filter . Flow monitor . Flow controller DFR 45 with temperature sensor and measuring water extraction point . Inlet and outlet valve . Holder for buffer solutions and buffer solutions for adjusting the measuring cells . Multicolored LEDs...

...Electromagnetically operated pinch valve PPV 7 (NO) with high flow rates and precise control. The 2/2-way NO pinch valve clamps tubes with a Diameter up to 7mm and depending on the used material (PVC / Silicone) up to 1.5mm wall thickness. It has a clamping force of 42N. Solenoid weight:1300 g Dimensions:84 x 53 x 146  Design:2/2 way  Mode of action:NO  Diameter hose:4 to 7 mm Nominal voltage:DC 24 V Duty cycle:100 % Power consumption:18 W Thermal class:B 130 °C  Clamping force:42 N Connection:Lead 20 cm ...

... system disposes of up to 128 individually adjustable circuits and is suitable for the processing of polyolefins and technical thermoplastic materials. In case of the basic execution (itd B) the requested flow rate is adjusted manually and is then monitored by a flow meter and presented digitally and graphically on the central display of the control unit. In the standard execution (itd R) the water...

...The small flow meters and monitors of the KDF-9 and KDG-9 types for liquids and air operate based on the principle of a float. The installation position is vertical, and the flow direction is from bottom to top. The devices are designed as simple and therefore cost-effective measuring systems. The float is a sphere, with the reading edge being the top edge of the sphere. A needle valve is...

...— Slide gate valve for solids flow on/off control, mainly used as an automatic valve for loss-in-weight feeder refill — Double acting pneumatic drive — Readily mounted 5/2 way solenoid valve Diameters - Different versions 80–400 mm (3.1–15.7 in)...

... requirements and an electronic control valve that modulates flow based on an external signal from a control system. The external signal can be 4-20mA or may be delivered using digital communications. FEATURES • Large LCD display provides vital information such as Valve position, Alarms, and diagnostic messages • Simple and intuitive programming menus • Field programmable engineering units • Standard Modbus TCP for easy integration with control systems • Manual actuation of valve possible • Built-in Web Server for remote access to device • Calibration in state-of-art ISO/IEC 17025:2005...

...The fine control valve regulates even the smallest flow rates with great precision and with linear flow rate characteristics. Different spindle types are exactly matched to the media and the flow range. Additional safety and reliability are achieved by the spindle thread outside the media flow. Thread:Female G-thread...

... the fine gradation of the KV values, are essential for accurate regulation. Kynar® (PVDF) and PVC are available as housing materials. Nominal sizes of 1/4" and 1/2" NPT are available. The valve flow rates KVS can be used as follows: for 1/4": KVS 0.003 - KVS 0.27 in Hastelloy C, Titanium, Tantalum for 1/2": KVS 0.043 - KVS 2.15 in Kynar® or PVC KVS 0.003 - KVS 2.15 in Hastelloy C, Titanium, Tantalum...

...- High mechanical strength - High flow rate due to maximum inner diameter - Flow direction is arbitrary - Valve can be cleaned without disassembling the actuator Type: Diaphragm Actuation: Pneumatic Function: Control Body: Double flange, cast iron, EPDM, NBR Number of ways: 2/2-way Additional features: ANSI, normally closed, double-acting, for high flow capacity...

... with fillers - no backflow within the sampling pump - electrical control of the pump with pressure control - valve-free pump system - no material pressure reducer necessary due to electronic pressure adjustment - very good residual emptying (less than 1% residue) - electronic "empty" and "almost empty" message Application: - Removal of media directly from the delivery container, e.g. silicones, adhesives, resins, greases, colour pastes, metal-filled pastes (Cu and Ni solder pastes, Al and Ag pastes) - supply of media to dispensers - direct dosing as pulsation-free flow rate...

...Control valves and directional valves clear, block or change the flow direction of the medium used. They control the direction of the volume flow, i.e. the exit direction of a cylinder, and through start-stop commands the travel distance of the stroke. Our product range includes manual, pneumatic and electro-pneumatic actuated valves in 3/2-, 5/2- and 5/3-directional design. Directional valves acc. to NAMUR, supply units, base plates, logistics modules and two-handed safety control valves add to the assortment.

... fluids, ensuring optimal performance and efficient operation of machinery and equipment. Control valves can be actuated in various ways, including pneumatically, hydraulically, or with electric motors. Some valves, known as automatic control valves, do not require an external power source and operate solely on fluid pressure.When selecting a flow control valve, it’s important to consider factors such as flow rate and pressure requirements, material compatibility, and environmental conditions.

...hose, dispensing nozzle, and drum fitting. Also suitable for use in explosive areas. Product Features: - Pump with mechanical seal - Control lever to close the non-return valve / foot valve - Pulsation-free pumping - Pumping against a closed valve (e.g., dispensing nozzle) possible - Radial shaft seal prevents the ingress of vapors and liquids into the coupling area Advantages: - Less than 0.05...

...TOPAZ differential valves are the ideal valve for water tanks in pressurised systems. The float valve with diaphragm offers a high flow rate of up to 200 l/min. Furthermore, an adjustable level control from 50 mm up to 2500 mm is possible. This minimises the number of start-stop operations of the pump system and ensures minimal pump operation. Material:ABS, Nylon Seal:EPDM Max. Temperature:60°C...

... flow. The fully automatic medium-controlled STRATE relief valve EVA has been specially designed for this procedure. As well as not requiring any maintenance, the STRATE relief valve EVA is an extremely economical device for reducing load during start-up since there is no longer any need to use complex externally controlled valves or electronic start-up aids. Product features Fully automatic control Specialized material G-AISi9Cu3 - specific to the requirements With solenoid valve for different motor speeds With overpressure valve For higher pressures and temperatures ...

... configurable via external signal input: 10V DC signal or temperature sensor PI Parameters for PI Algorithm Maximum Output Voltage Control Effect Positive / Heating or Negative / Cooling With the differential pressure and volume flow controller DPC200, you can measure the smallest differential pressures of non-aggressive gases, particularly air. An analog output signal of 0…10V is available, and depending on the device settings, this signal has different meanings.

...JEVAflow® FCU-4 Control unit for up to four analog or digital MFCs Easily readable 4-digit LED display and status indicators for each channel Display and input of flow values in % of the measurement range or slm/sccm Control via front keypad or serial interface RS 232 Master/Slave function One analog output per channel Two relays per channel for process and valve control Wide-range power supply...

...The Rotameter Model E is a high-quality acrylic flow meter. It is a reliable and easy-to-read instrument for measuring and controlling the flow of liquids and gases. It is available in single or multi-tube versions with numerous options. Model E features a control valve and is also available in custom designs. Common applications include water and air purification, protective gas measurements, and other measurements of gases and liquids.

... materials: PMMA, optional: PEEK™; valve: PEEK™, FFPM optional: PPS, FPM, EPDM; volume flow sensor: borosilicate Seal materials: FPM, optional: EPDM, FFPM Electronics: ARM Cortex M3 microprocessor Motor: brushless DC-motor (BLDC); nominal voltage 24 V, torque 3.3 mNm; analog hall sensors Electrical connection: D-sub plug, 15-pole (male connector) Power supply: 24 V DC ±10 %, max. 1.5 A Interface: RS-232...

... of the saw frame with a quick-release lever — Feed adjustment via a hydraulic flow control valve — Automatic adjustment of the saw frame position above the material to be cut — Frequency-controlled band saw drive (partially optional) — Exact cutting path Type: fixed installation Technology: band, miter Processed material: for steel, for plastic Application: for profiles, for pipes Additional features: automatic, horizontal, precision Additional features: with hydraulic vice...

... Vertical, Horizontal, 45 Degree and 60 Degree Wire Test Packages Sliding hand ports for chamber access Regulated gas control system Calibrated gas flow meter with precision needle valve adjustment ASTM D5025 Bunsen burner with remote positioning Stopwatch plus three handset operated digital timers Tempered glass sliding window Interior inspection light Flame height gauge High temperature exhaust blower with variable speed control ASTM D5207 flame confirmation kit...

... liters Opening Pressure of Safety Valve 7 7 7 7 bar Operating Pressure 0.5 - 6 bar Air Consumption depending on setting 50 - 100 l/min/ nozzle Air Consumption depending on setting 5 - 200 ml/h/ nozzle Control manual: Hand lever valve Control electric: Solenoid valve 24 V, 110 V, 230 V Control pneumatic: Control air up to 6 bar Individual as well as multiple processing stations can be supplied with lubricant via a system container. Accessories Electric level monitoring Pressure switch/pressure sensor Infinitely variable oil and air flow control Automatic filling Hose packages First the microjet...

...Control valve and Flow indicator for use with calibration gas cylinder. Flow meter markings are nominally 0.5 & 1.0 litres/min.

...Our installation systems with integrated safety control block are suitable for installation in pressurized lines. The integrated safety control block consists of a volume flow reduction unit and a pressure reducing valve. These two components make this system become a cost-effective, very safe, and technically fast operating solution. The mounting to existing systems and machines can be completed in just a few minutes, because there are only 2 connections and mounting material is also part of the system.

...there is a drilled ball; once the hole in the ball aligns with the water line, water will flow out. A rotation of ninety degrees is sufficient to close the ball valve again. Most ball valves are operated with a wing handle, ISO-T handle, or wing handle. If the handle points towards the supply line, the ball valve is open; if the line is perpendicular to the pipe, the ball valve is closed.

...The flow control valve ensures a nearly constant flow rate regardless of pressure. The desired flow can be adjusted by turning the spindle on the hydraulic valve.

...Proportional regulation and control of high flow rates • Frictionless movement; • High flow rates; • Small footprint and size; • Low power consumption; • Pressure-balanced; • High dynamics; This valve combines the advantages of the Spider-μProp technology with the benefits of a pressurebalanced valve. Due to its large orifice, high flow rates are possible. Furthermore, the valve is...