electrical insulation material Germany

...Affordable PP-V0 (according to UL94 with approval E354767) with RTI of 120°C, CTI=0, breakdown strength of 43 kV/mm, easy to punch, foldable, dimensionally stable, also available in other films like Nomex, Mylar, Kapton. Electrical insulation using the cost-effective Duravolta made in Germany. REACH and RoHS compliant, halogen-free, flame-retardant according to UL-94 V0, available in thicknesses from 0.1 - 3 mm (other thicknesses available upon request), as film material or finished punched/bent parts. Processing possible via plotter, punch, water jet, or laser.

...Electrical Insulation Mats Recommendation Electrical insulation mats are used as flooring in transformer and high-voltage switch rooms, puncture-resistant up to 50 kV and approved according to IEC EN 60243-1. Material thickness: 4.5 mm Puncture resistance: 50,000 V * Surface: Fine grooves...

...fats, diluted acids, and alkalis, high stability, good elasticity; very high density 1.25 - 1.5 g/cm³; Thickness: 0.5 - 2.0 mm Applications: Carrier material for abrasives on backing (e.g., grinding discs); punched parts for mechanical applications; deep-drawn components (e.g., suitcase shells, welding masks); electrical insulation material; punched parts for seals; separating film for the production of polyester laminates; carrier for continuous laminates; carrier for plastic decors based on melamine resin; support layer for real wood veneers and deep-drawn surfaces; knife handles...

Our company history here at the location between Mannheim and Heidelberg dates back to 1938. For a long time, we were known under the company name Metzeler Technical Rubber Systems GmbH. Cooper Standard had consolidated business areas under the name Cooper Standard ISG that serve markets outside the core automotive business. Cooper Standard Technical Rubber GmbH became part of this group with the...

...AGK supplies you with insulating discs in two temperature ranges: on one hand, from DuroBest®, a thermosetting plastic, and on the other hand, from K-Therm® AS M, a mica-based laminate. Both material groups are characterized by good electrical insulation properties and, unlike thermoplastic insulating materials, are pressure-resistant, meaning they do not get 'squashed' when screws are tightened...

... and shaped without breaking or cracking. It is commonly used in electrical engineering, electronics, telecommunications, and other industrial applications where high mechanical stability and insulation capability are required. Available from us in various sizes, colors, and lengths.

... pockets between the heat sink and the component being cooled hinder the optimal thermal connection. Possible consequences include temperature overload, which can lead to overheating in the worst-case scenario. Thermal management and insulation products act as connectors between the heat sink and the electronic component being cooled. They fill every tiny gap between the heat sink and semiconductor with thermally conductive material. This ensures optimal thermal connection and prevents any heat buildup.

...Due to their high dielectric strength, low moisture absorption, and UL94V-0 classification, these materials meet the requirements of most electrical insulation applications. Thanks to their excellent mechanical properties, Formex can be bent multiple times to create three-dimensional shapes without breaking or splitting the material. • UL flame retardant • High electrical dielectric strength • High mechanical stability • Extremely aging/chemical resistant • Non-moisture binding (moisture absorption 0.06%) ...

... typical material used to achieve electrical insulation on components. Coatings with aluminum oxide can be applied using both the PRAXAIR Plasma System and the PRAXAIR Detonation Gun. Applications: - Components for circuit interruption - Ball bearings - Thermocouples - Welding technology components - Corona rollers...

The industrial supplier: Your expert for industrial supplies, storage needs, construction supplies, and municipal needs. Discover our high-quality products from renowned brand manufacturers such as Bemefa, bimos, COBA Europe, dancop, Ergomat, KERN & SOHN, and Kraiburg. Our range includes workplace systems, anti-vibration mats, floor markings, signs, labels, adhesive points, measuring points, tacti...

...• For stripping solid, stranded or finely stranded conductors with standard insulation • With V-shaped cutting edge for wires and strands up to a max. of Ø 5 mm or 10 mm² conductor cross section • With adjustable screw for easy adjustment to the required wire or strand diameter • With opening spring • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles...

...DURAVOLTA is a new developed flame retardant and heat stabilized Polypropylene, made in Germany. The main reason for developing this material was to offer a halogenfree material according to IEC 61249-2-21 with outstanding heat and electrical insulation properties. It unites very good technical values, high form stability and ecologically aspects with a very good price-performance-ratio...

...GLICORIT is a high-quality insulating material with excellent electrical properties. GLICORIT is a high-quality insulating material with excellent electrical properties. This material is made from mica paper, which is pressed into mechanically stable sheets using a heat-resistant resin. Applications: Machine, plant, and industrial furnace construction, asbestos replacement, electrical insulation, glass industry, in tools for pressing and injection molding systems.

... know-how in the field of laminating materials as an aluminum foil manufacturer, with the combination of a new developed core material (glass wool), it achieves superior performance. (a thermal conductivity: in 0.0020W/m, k *1) Leight Weight: Compared to our conventional core material, it is 1/4 lighter. It is the best solution in the wide-ranging field which requires lighter weight, such as automobile, refrigerator, cooler box, thermos, etc.

... is inherently flame-resistant. Thanks to its excellent chemical resistance, PTFE is ideally suited for use in the chemical industry. Additionally, this plastic is characterized by excellent insulation properties. Polytetrafluoroethylene is used in various applications, including mechanical engineering, transportation technology, electrical engineering, semiconductor technology, medical technology, and food technology. The material is used, for example, for valve seats, pump rotors, seals, roller coverings, sliding bearings, and strips.

... the implementation of specially flat load deflection curves that are possible with metal only with considerable complexity and expenditure (slotted versions). For compensation of axial clearance and manufacturing tolerances For vibration compensation For noise dampening When an antimagnetic material is required For electrical and thermal insulation When no corrosion problems should arise When...

...WADI one stainless steel cable glands provide a perfect cable entry solution for a wide range of applications. Properties: — perfect hold and total insulation of the cable — integrated cable anchoring — high clamping capacity — suitable for a wide range of cables from 3 to 53 mm in diameter — easy to adapt to larger cables — temperature range -40 °C / +100 °C (dynamic) — protection type IP66 / IP68 up to 15 bar (30 min.) / IP69 — with metric thread from M12 to M63 Material: Nickel-plated brass Protection type: IP66 / IP68 - 15 bar (30 min.) / IP69 For cable diameter: 3 - 53 mm...

...You may know the plastic polyethylene terephthalate from PET plastic bottles in your daily life, or you may have encountered it as polyester in textiles. In addition to these well-known applications, PET is also commonly used for sliding parts such as bearing bushings and guide rails, for components in food technology systems, or for electrical insulation components. It is even used in the production of film material for cinema. With its high wear and fracture resistance, PET is ideally suited for the production of durable profiles with high dimensional stability.

... Motor:brushless DC-motor, IP 54, 36 V DC, max. 201 W Electrical connection:motor cable length 2 m, 6-pole plug for motor winding, 5-pole plug for hall sensors Dimensions (L x W x H):257 x 130 x 129 mm Weight:approx. 8300g Remarks:* with optional heat insulation module, Customized solutions on request.

...The term asbestos stands for a group of very resistant and non-flammable minerals with a fibrous structure. Until the beginning of the 1990s they were mainly used for thermal insulation or fire protection. Asbestos is found in brake pads and clutches, in electrical appliances, in machines and technical equipment, in heating systems and, above all, as a building material in a great many buildings...

...Even during the development process, we check the insulation materials of your electrical product for compliance with standards regarding fire resistance and creepage current resistance.

...Heat-shrinkable end caps and split caps made of polyolefin Adhesive-coated end caps for sealing cable and pipe ends against moisture and other media The adhesive-coated split caps are suitable for insulating and sealing multi-conductor cables and branch connections. The weather-resistant and UV-resistant material is excellent for electrical insulation.

...ThermoEP-170 is a composite material based on epoxy resin with high thermal conductivity, high adhesion strength, and high reliability, primarily used for the encapsulation of ICs, crystals, diodes, network transformers, and other semiconductors. It offers advantages such as small size, lightweight, simple structure, convenient processing, good chemical corrosion resistance, excellent electrical insulation performance, high mechanical strength, etc., especially when compared to conventional encapsulation materials, and provides higher thermal conductivity. Origin: China...

...For our conveyor screws, we offer various optional treatments that are necessary or desirable depending on the conveying task and the bulk material to be conveyed. Coatings Painting at SHA Plant Engineering Coatings for conveyor screws are required for various reasons, such as when dealing with an extremely abrasive and wear-prone product, or when electrical conductivity is present. We offer...

We, FRÄNKISCHE Industrial Pipes, are a 100% subsidiary of FRÄNKISCHE Rohrwerke, the world's first manufacturer of corrugated pipes. We develop products for the automotive and industrial sectors that are tailored to the needs of our customers. As diverse as the skills of our international team of experts are, we work collaboratively towards the same goal: to make our customers' lives easier. We con...

...Insulating bushings, bearing bushings, spacers/holders, insulating discs ETTINGER GmbH offers a wide range of mechanical components for electronics manufacturing. The application determines the material, which is available in a large selection in the ETTINGER program. Particular emphasis is placed on the precision of the parts, which are delivered by manufacturers according to strict ETTINGER...

...The Dexnyl PEEK tubes can be an intelligent solution for round and hollow pieces. They are mostly extruded or compression molded. But BIEGLO GmbH offers also injection molded PEEK tubes and spin casting PEEK tubes in long and short length and special thin wall tubes. Parts made-up of our PEEK offer excellent hydrolysis and electrical insulation. PEEK is the ideal replacement for metal and other...

...wege® - The flexible cable gland system in brass, stainless steel, and plastic Material: Nickel-plated brass, lamella insert: PA 6, sealing ring: CR, O-ring: NBR-Oz, protection class IP66/IP68 - 5 bar / IP69k, testing standard: UL 514B, strain relief DIN EN 62444 Tab. 2A, temperature range: -30°C to 100°C, connection thread: M12 - M63, additional information: Cable can be used with insulation...

... ferrite are used. Our transformers can be produced in open form (vacuum impregnated) or encapsulated in plastic housings, with UL-compliant insulation material available upon request. Current and voltage transformers of smaller sizes are typically designed for direct soldering onto the circuit board. The connections are laid out for solder wires or solder blades. Larger versions are available with various terminal or plug systems. For mounting the measurement transformers, depending on the design, housing tabs, foot angles, or mounts for rail systems (e.g., TS35 DIN rail) are used.

... - Mounting Tape - Insulation Tape - Cable Ties - Sleeves & Heat Shrink Tubes etc. - Dowels, Screws, Ceiling Hooks - Canopies - Stove Connection - Ferrules - Pipe Cable Lugs - Couplers - Crimp Cable Lugs - Screw Connectors - Gypsum - Acrylic and Silicone - Fire Protection - Control and Indication Devices - Socket Outlet Touch Protection...