electrical insulating material Germany

... pockets between the heat sink and the component being cooled hinder the optimal thermal connection. Possible consequences include temperature overload, which can lead to overheating in the worst-case scenario. Thermal management and insulation products act as connectors between the heat sink and the electronic component being cooled. They fill every tiny gap between the heat sink and semiconductor with thermally conductive material. This ensures optimal thermal connection and prevents any heat buildup.

...the standard DIN VDE 0680 Part 1 has been replaced by the European standard DIN EN 61111. With the transition to a European standard, the requirements for insulating mats have also increased, which can no longer be met by the proven natural rubber quality A-BY 60-84.

...AGK supplies you with insulating discs in two temperature ranges: on one hand, from DuroBest®, a thermosetting plastic, and on the other hand, from K-Therm® AS M, a mica-based laminate. Both material groups are characterized by good electrical insulation properties and, unlike thermoplastic insulating materials, are pressure-resistant, meaning they do not get 'squashed' when screws are tightened...

...We offer electrical insulating materials from the areas of thermosetting laminates, flexible laminates, insulating films, and hard fabrics. Depending on the material, delivery is available in formats and/or rolls.

...HTO-02, water-cooled furnace for material testing. Heating chamber (D x H): 100 x 170 mm • Lightweight, thermal insulating material (asbestos-free) • Stainless steel furnace housing • The furnace is prepared for the lateral installation of a length change sensor (HT-extensometer) Model HTO-02 • Heating zones: 1 • Max. Temp.: 1600°C • Heating chamber (D x H mm): 100 x 170 • External dimensions (D x H mm): 430 x 625 • Ext. slot (H x W mm): 104 x 32 • Water cooling: yes • Electrical connection: 28V/143A • Phase cut: yes...

... excellent electrical insulating properties, are characterized by high temperature resistance to reliably and permanently shield the windings of electric motors. Additionally, by using plastics with iron-based fillers, the magnetic permeability of the material can be improved. This enhances the performance of both motors and (especially) generators. Our high-precision extrusion process ensures very smooth surfaces and exact contours to meet all your needs.

...PALIMEX HK3-C is a two-component repair compound for corrosion protection coatings with significantly accelerated curing. The packaging in a double cartridge allows for easy, safe, and on-demand mixing. The compound cures without pores and forms a highly insulating electrical coating. The cured material is impact-resistant, indentation-stable, and withstands high tensile shear stresses.

... typical material used to achieve electrical insulation on components. Coatings with aluminum oxide can be applied using both the PRAXAIR Plasma System and the PRAXAIR Detonation Gun. Applications: - Components for circuit interruption - Ball bearings - Thermocouples - Welding technology components - Corona rollers...

...{"Materials":"","Temperatures":"","Stranded wire with ferrule":"0.25 mm² - 2.5 mm²","Dimensions":"","Storage temperature":"-40 °C - 105 °C","Material":"PA 6.6","Flammability class":"UL 94 V-0","Solid wire":"0.2 mm² - 4.0 mm²","Screw":"Steel","Stranded wire (flexible)":"0.2 mm² - 2.5 mm²","Strip length":"6.0 mm","Contact tab":"Copper alloy","Insulating material":"","Clamp piece":"Brass","Operating temperature":"-30 °C - 105 °C"}...

...% natural origin — ultrastrength material — corrosion-resistant — chemical resistance — high electrical resistance — low thermal conductivity basalt fabric:fire protecting, light, ecological...

...ThermoSIL-400 is a two-component silicone material that can cure at room temperature or be accelerated with heat. It is primarily used for potting protection of electronic and electrical products, IGBT modules, power drive modules, and other applications. Compared to conventional silicone for encapsulation, this product offers good flowability, is easy to dispense, and has excellent thermal conductivity and insulating properties. Origin: China Specification: Two Components...

... 6.0 MPa (N/mm²) Elongation at Break: Min. 200% Compression Set: 70 hours at 150 °C Max. 40% Properties - Aging and Moisture Resistant - Very good weather-resistant properties - Odorless and tasteless - Contains no harmful substances - Good electrical insulating properties - Remains elastic, even at high and low temperatures Chemical Resistance - Diluted Acids and Bases (Alkalis) - Warm and cold...

...These insulating cases combine electrical insulation with high mechanical strength. As they are resistant to electrolytic corrosion, they are essential for connections between incompatible metals. Material: PA-glass fibre reinforced Colour: black Colour white on written request.

... products for bundling cable harnesses. They provide a simple and effective solution for organizing cables and wires neatly and securely. The tape is made from a flexible material with a special adhesive coating. Aluminum Adhesive Tapes for Heating, Air Conditioning, and Sanitary Applications Aluminum adhesive tapes are particularly resistant to cold and heat, as well as durable. These specially developed adhesive tapes are used in heating, air conditioning, and sanitary applications. They provide an effective solution for sealing, insulating, and repairing pipes.

...Insulating bushings, bearing bushings, spacers/holders, insulating discs ETTINGER GmbH offers a wide range of mechanical components for electronics manufacturing. The application determines the material, which is available in a large selection in the ETTINGER program. Particular emphasis is placed on the precision of the parts, which are delivered by manufacturers according to strict ETTINGER...

...flexible heating mats made of silicone, polyester, or Kapton film In the heating elements "ELMAT", a resistance circuit is inserted between layers of dielectric insulating material, which can be produced using different technologies. These include the etching of metal foils (Type X-MAT®), the application of paints or pastes (Type T-MAT®), and the embedding of resistance wires (Type W-MAT®). In this way, thin and particularly flexible elements with numerous design possibilities are created.

...This material can be used for insulation up to 1850° C. Due to the weight ratio of chemical elements, the Earth's crust contains over 82% oxygen, silicon, and aluminum. The inorganic, textured ceramic fiber has been produced from this raw material combination, making it fire-resistant and thermally insulating. This advanced chemical technology enables the production of this fiber by melting...

...These hoses are made from a particularly high-quality silicone rubber (VMQ). With its chemical and physical properties, it meets a wide range of different requirements. Its electrical properties, which remain nearly constant in contrast to other elastomers in the temperature range of -60 to +200°C, make silicone an indispensable insulating material in electrical engineering and electronics.

...GLICORIT is a high-quality insulating material with excellent electrical properties. GLICORIT is a high-quality insulating material with excellent electrical properties. This material is made from mica paper, which is pressed into mechanically stable sheets using a heat-resistant resin. Applications: Machine, plant, and industrial furnace construction, asbestos replacement, electrical insulation, glass industry, in tools for pressing and injection molding systems.

...- Foaming of all construction connection joints with high movement absorption, e.g., roof extensions, pipe penetrations, roller shutter boxes, window sills, etc. - Insulating and isolating in refrigerated vehicle and cold room construction, heating, appliance, and caravan construction, as well as in electrical installations.

...Heat-shrinkable end caps and split caps made of polyolefin Adhesive-coated end caps for sealing cable and pipe ends against moisture and other media The adhesive-coated split caps are suitable for insulating and sealing multi-conductor cables and branch connections. The weather-resistant and UV-resistant material is excellent for electrical insulation.

... are also used for cable sheathing, insulating hoses, and in traffic signal systems. Properties EPDM rubber offers many positive characteristics as a material, which are crucial for its diverse applications: lightweight and durable excellent sealing properties high compressibility (especially as sponge rubber) high elasticity good recovery capacity good damping properties flexible processing options tolerance acceptance...

... ribbed, paper bobbins, Thermofix, Thermofix paper, Hydrofix paper, bundling material, bundling materials, bundling, endless banderoles coin roll paper, coin roll wrapping, coin rolls, coin wrapping paper, printed paper roll, banknote banderoles, paper rolls with advertising print, paper drinking straws, paper drinking straw, paper straw, cable insulating papers insulating paper, insulating papers...

... Services: punching, turning, milling, cutting, formatting, laminating, packaging, gluing, plotting, bending, perforating, engraving, film processing, film handling, roll processing, format cutting, Our Products: insulating films, insulations, electrical insulating parts, winding insulation, plate edge parts, turned parts, damping parts, buffers, film cuttings, self-adhesive plastic parts, self-adhesive punched parts, seals, rubber seals, plastic seals, rubber punched parts, film punched parts, punched parts...

... Short response times, direct accessibility, and customized concepts that meet customer needs set us apart! We are at home in almost all industries: Chemical industry, fertilizer technology, material handling equipment, conveyor technology, leisure technology, action sports, feed technology, glass industry, lifting technology, metallurgical plants, gravel plants, food industry, logistics industry...

Manufacturing of insulation parts for the electrical industry. Cover sliders, groove insulations, phase separators, stamped parts, bent parts. Insulating material for the electrical industry. Cutting of roll material.