cast aluminum alloy Germany

... of steel structures (e.g., cast iron pipes, steel frames, power poles, gas cylinders, wind turbines, bridge constructions, etc.). Coating of capacitors (film or paper capacitors). Coating of heat exchangers for air conditioning systems. Delivery Program ZnAl2, ZnAl4, ZnAl15 (other alloys available upon request) Standard diameters: 1.60 mm – 4.76 mm according to DIN EN 14919. Other dimensions available upon request. Grillo ZnAl alloy wire is available on spools, in rings, or continuously wound in fiber or metal barrels.

...The purchase of Aluminium alloy billet is an option available to our customers from our on-site Cast house. The billets are cast by conventional direct chill semi-continuous casting using float-dip tube technology. The subsequent homogenisation takes place in one of our two homogenising ovens. We are able to offer short lead times for machined billet in smaller quantities than would otherwise be available. With the wide range of alloys and dimensions we can offer, we will surely find a solution for you.

... blade and ensures even greater cost-effectiveness through longer tool life. The standard feed control with a servo system achieves even higher cutting performance when cutting tool and high-alloy steels, as well as difficult-to-machine materials such as Hastelloy or Inconel. A highly efficient chip brushing system cleans the saw blade on both sides from adhering saw chips. Type: fixed installation Technology: band Processed material: for steel, for aluminum, for non-ferrous metals Additional features: high precision, high speed...

... as: Aluminum alloy wheel scrap Aluminum wire scrap Aluminum Extrusion 6063 scrap Aluminum engine block scrap Specification 1.Competitive price 2.Fast Delivery Within 20 days 3.SGS , BV 4.Professional factory...

...Die-casting, die-casting molds, die-casting tools, die-cast parts, die-cast parts made of zinc and zinc alloys, die-cast parts from zinc alloys, die-casting with zinc, die-casting parts, die-cast parts made of magnesium, magnesium die-casting, magnesium die-cast, magnesium die-cast parts, aluminum die-casting, aluminum die-cast parts, aluminum die-casting, zinc die-casting, zinc die-cast, zinc die-cast parts, zinc die-cast parts, zinc die-casting, magnesium die-casting, aluminum die-casting German quality, German communication, Chinese price, Chinese speed, Best service = Runbond Mould...

... Food-safe: Suitable for contact with aqueous and acidic foods and complies with the provisions of Directive 2002/72/EC and Regulation 1935/2004/EC, as well as the LFGB 2005. Areas of application: - Drop baskets for filter elements - Measuring and testing instruments - Plant engineering - Meter and manometer housings - Plug and socket housings - Sanitary and residential areas - Technically decorative surfaces - stainless steel look Base materials: - Steel, alloyed steels - Cast iron - Non-ferrous metals - Aluminum - only with NiDur pre-nickel plating...

... Oversized trapezoidal nuts are manufactured using our highly precise internal whirling process. A variety of materials allows for excellent adaptation to individual requirements. Possible materials include: - Red brass / Bronze (e.g., RG7, GBZ 12) - Aluminum multi-alloy bronze (e.g., Cu AL 10 Ni) - Gray cast iron (e.g., GG 25, GGG 60) - Brass (e.g., Ms 58) - Plastics (e.g., Nylatron) - Steel (e.g., C45, St 52) - V2A (e.g., 1.4305) - V4A (e.g., 1.4571)...

...Ball cage made of aluminum alloy, block cast, hardened, aerospace standard. The ball cages are supplied with retaining rings.

...Vertical honing up to a stroke length of 500mm, max. diameter 160 Horizontal honing from a diameter of 1.6 Our tolerance range is 0.002, verifiably measured. Our specialties are pairings and surface finishes. We work with single and multi-layer diamond and borazon coated tools. No matter what materials we hone, we ensure your fits. - Cast - Aluminum - Alloy steels up to 65 HRC - Solid carbide - Ceramic (raw or sintered) Our tool spectrum ranges from D1.6 to D150 If you think it’s impossible?! Call us beforehand.

...{"Non-Ferrous Metals":["Aluminum","Aluminum Bronze","Bronze","Gray Cast Iron/Spheroidal Graphite Iron","Copper","Copper-Nickel Alloy","Magnesium Alloys","Brass","Nickel Silver","Nickel Alloy","Low-Alloy Copper Alloy","Red Brass","Special Brass","Special Materials (White Metal, Titanium, Tantalum, Zinc)"],"Steel":["Austenitic Steel","Carbon Steel","Stainless Steel","Tool Steel","Fine Grain...

...Cast iron, unalloyed steels, low-alloy steels, low and high alloyed stainless steels, aluminum...

... Panel size: 600 mm x 337.5 mm x 50 mm Panel weight: 5kg/6kg Panel material: Aluminum / Magnesium alloy Control: Processor and PC / Smartphone Light power: 600 lenses / 800 nights LED Type: CMS 1010/SMD1212/SMD1515 Refresh rate: 3840Hz. Power consumption / SQM: 300W-800W IP protection rating: IP20 / IP31 Control system: Novastar Processing: 16 bits / 18 bits Cooling: Passive Usage area: Fixed indoor screen Certificates: CE/CEM/LVD-ATR-EUR1...

... efficiency • High-performance fiber fleece filter insert made of olefin polymer fibers (mesh size 50 µm) • Housing made of aluminum die-cast alloy • Nominal sizes DN 15 to DN 50 with threaded connection dimensions according to ISO 7005-1 • Standardly equipped with connections for pressure measurement G 1/8 • Special seals for use with aggressive gases (e.g., coke oven gas) available as an option • EC type-tested and certified Application FG gas filters are used for the purification of combustion gases and combustion air, thereby protecting downstream devices.

...Water-miscible Cutting Fluid (KSS) YOUiNG EMUSOL M 565 BFF is a water-miscible, boron- and formaldehyde-free cutting fluid designed for universal use in medium to heavy machining operations, such as turning, milling, drilling, and sawing of cast iron, steel, high-alloy steels, and aluminum. Thanks to a special and high-quality emulsifier system, modern technology, and excellent lubrication...

...Cutter Pumps The SXC series cutter pumps are designed for medium-alloy steels and for combined machining of cast iron/aluminum, with chips that can be in the form of a coil. The chips must be directed to the pump's suction. Here, they are taken by the agitator and, if necessary, broken down, then cut and pumped. SXC series with interchangeable flange options for vertical or horizontal connection...

...In the die casting process, aluminum alloys according to DIN EN 1706 are cast with piece weights of up to 45 kg, even using sand cores. We are happy to advise you during the casting part development regarding alloy selection as well as the most effective design of the die tool. Whether in-house or with one of our long-standing processing partners, we will machine your part and deliver it ready for installation, if desired, tested for pressure tightness.

...● Tool steel, case hardening steel, quenched and tempered steel, ETG, ESP, stainless and alloy steels, aluminum/Dural, gray cast iron, Meehanite, brass, bronze, forged and cast parts HEAT TREATMENT ● Hardening, case hardening, induction hardening, annealing, tempering, quenching, bath (Tenifer), gas and plasma nitriding SURFACE FINISHING ● Galvanizing (blue, yellow, black), chromating, hard chrome plating, bluing, aluminum casting – impregnation...

...Precision parts are in demand across a variety of applications. Whether in mechanical and plant engineering, conveyor technology, vehicle construction, power plant technology, aerospace, or heavy construction machinery - parts from Martin Höhn GmbH meet the highest standards. Our core competency lies in the machining of all types of stainless steels, titanium, Hastelloy, and high-strength alloy steels, as well as various aluminum alloys, cast materials, and plastics.

...Material: Gray cast iron, ductile cast iron, tempered cast iron, white cast iron, aluminum, brass, bronze, chrome iron, carbon and low-alloy steel, high manganese steel, and stainless steel Size: ≤ 3,000 mm Weight: ~ 8,000 kg...

...The WLP 4900 is a robust, reliable testing device with only 0.5% measurement tolerance. The WLP electronics are housed in a stable, lightweight aluminum cast enclosure that withstands aggressive environmental conditions. The electronic components comply with MIL specifications, ensuring trouble-free operation. Accurate, fast, and non-destructive testing of alloy content, heat treatment, material mixing, and hardness in sheets and finished parts made of aluminum, copper, bronze, and other non-ferrous metals, including LiAl alloys.

...Rosts are cast from a special aluminum alloy. Crossability/wheel load of up to 5 tons possible. Steel frame available (hot-dip galvanized). Coloring: available upon request.

...Casting Alloys for Die-Cast Parts The production of Hydro is based on primary aluminum. Consistently high metal quality is ensured through the use of high-quality raw materials and best practices. Our casting alloys are manufactured according to customer specifications in the main alloy groups according to ISO, EN, and JIS. Key Properties - Excellent castability - High and consistent metal...

... all types of foundry manufacturing. The most commonly used technologies include: Sand casting Materials: Gray cast iron, ductile iron, malleable iron, high and low alloy steel, aluminum, copper, brass, bronze Investment casting Materials: High and low alloy steel, aluminum, copper, brass, bronze Die casting Materials: Aluminum, zinc Permanent mold casting Materials: Aluminum, brass...

... round bars, flat bars, pipes Cast Tin Bronze and Red Brass: CuSN7ZnPb, CuSN12Ni in round bars, hexagonal bars, square bars, flat bars, pipes Cast Aluminum Bronze according to DIN 1714: CuAl10Ni3Fe2, CuAl10Fe5Ni5, CuAl11Fe6Ni6 in round bars, square bars, hexagonal bars, flat bars, pipes, sheets Low-Alloy Copper Wrought Alloys: CuBe2, CuCo2Be, CuCo1Ni1Be, CuCrZr, CuNi2Si, CuTeP in round bars, square bars, hexagonal bars, flat bars, sheets Gray Cast Iron and Ductile Iron: GGC 25 and GGGC 40/50 in round bars, square bars...

...Motors of the DELPHI series in frame sizes from 56 to 355 (IEC Standard 72-1) Asynchronous three-phase motors of the DELPHI series with ventilation, up to and including frame size 132 made of die-cast aluminum alloy, from frame size 160 to 355 made of cast iron. DELPHI: DELPHI...

... as tool steel powder (1.2709), stainless steel powder 316L, AlSi10Mg, TiAl6V4 alloy powders (fine/coarse), and CoCr powder. By scaling up quantities, combined with optimized inventory management and quality assurance, we connect the advantages of international trade with the availability and quality demands of our customers, promoting industrial 3D printing. Another focus is on the development of...

... zinc-nickel alloy as a solution for components with high corrosion demands that are exposed to severe temperature, de-icing salt, and climatic stresses. The process using acidic electrolytes results in smooth and shiny layers with high accuracy in composition and layer thickness on parts made of steel, cast iron, or zinc die-casting. Another advantage is that the potential values of the zinc...

...), Ductile Cast Iron (EN-GJS), Cast Iron with Vermicular Graphite (EN-GJV) Steel: High and low alloy steel, heat-resistant, structural steel, hot, cold, and high-speed steel Non-Ferrous Metals: Aluminum, Copper, Brass, Zinc Casting Processes: Sand Casting, Centrifugal Casting, Die Casting, Gravity Die Casting, Full Mold Casting, Continuous Casting, Investment Casting Forging Processes: Die Forging...

... prototypes in close collaboration with you. - Streamlining and optimizing technical production processes. - Heat treatment - Surface treatment - Material procurement We process the following materials: - Construction steels - Alloy steels - Case-hardening steels - Tool steels - Stainless steel - Cast iron - Aluminum - Brass - Bronze - Copper - Plastics...

In our company, only zinc alloys are cast in 11 hot chamber die casting machines. Our preferred alloy is known under the trade name Z410, with 4% copper and 1% aluminum being the main alloying components. The chemical designation of this alloy is: ZnAl4Cu1. In our in-house mold construction, our mold makers work with state-of-the-art CAD systems. We manufacture the molds and mold inserts here in...