uv adhesives Germany

...The UV LED chamber BSL-03 is the second largest irradiation chamber in the BSL series. The high irradiance combined with the exact dose control offers a unique reproducibility for perfect results! Due to the irradiance of up to 220 mW/cm², it is possible to use the most common UV curing adhesives or lacquers. For high irradiances, the UV LED chamber can be ordered completely with one LED...

...Elastic Adhesives - SIKAFLEX 521 UV - Adhesives & Sealants...

... the printing industry but also in many other sectors. For instance, UV emitters are utilized in photolithography within the printed circuit board industry. The ultraviolet emitters are used for exposing circuit boards that have been coated with a special light-sensitive photoresist. In adhesive applications, UV emitters are also frequently used, as they can accelerate the drying process of many adhesives.

...Polytec UV 2108 is a low-viscosity, one-component, thixotropic, solvent-free, high-strength, UV-curing adhesive based on acrylate. Polytec UV 2108 produces impact-resistant, moisture-resistant, and very fast-curing bonds. It is biocompatible according to ISO 10993-5. It is used in many medical applications as an adhesive and sealant, as well as a sealing material. It is also used for bonding thermoplastics such as (hard) PC, PMMA, SAN, ABS, PVC, (soft) PS, PP, PE, as well as PET and PA.

...Examples of materials for dosing: 1- and 2-component epoxy, UV / light-curing / thermosetting adhesives, highly filled materials, anaerobic adhesives, shear-sensitive adhesives, heat-conducting paste, sealants, flavourings, silver conductive paste, flux, perfume, isopropanol, industrial oils, silicone, alcohol, grease, paint and ink, MEK, braze paste, PU, acetone, petrol and many others. The...

...2K adhesive based on methacrylate, polyurethane, and epoxy resin 1K adhesives based on UV-acrylate, cyanoacrylate, and anaerobic acrylate adhesives Structural adhesives are referred to when the force transfer from one component to another occurs directly and without loss of force. Thus, structural adhesives are high-strength, hard, non-soluble connections. Variations in toughness allow for structural bonding even in crash-stable applications in the automotive sector.

... pencils. From plain wood to coated pencils up to PP and ABS pen barrels. Printed in less than 5 days, you will be ready to roll in no time. For the printing itself we use a high-end digital printing press based on toner and combine it with water-based adhesives without UV or VOCs. With this mix we can print details as tiny as 1-point small text. Personalized or serialized prints with safety features are also available. All you need to apply them is a heat transfer or hot stamping machine.

...ELKALUB GLS 886/N2 is a polyalkylene glycol grease that can be used for the lubrication of rolling and sliding bearings, as well as for the lubrication of smaller gearboxes with a high sliding friction component (e.g., worm gears). The easily solvable properties of ELKALUB GLS 886/N2 concerning UV light curing products (paints, coatings, adhesives) keep bearing points mobile. This applies, for...

...Vitralit® adhesives and casting compounds are one-component systems based on acrylate or epoxy resins that cure in the shortest time when exposed to UV or visible light and can be thermally post-cured depending on the product. Depending on the application, curing times of 0.5 to 60 seconds can be achieved. This enables the shortest cycle times for mass production. The light-curing adhesives in...

... • Reduces water absorption in mortar • Free-flowing white powder with excellent re-dispersibility • REACH certified for safe usage Applications: skim coats, tile adhesives, no shrink grouts, EIFS system mortars, and self-leveling compounds. Technical Specifications: • Appearance: White, free-flowing powder • Solid content: ≥98.0% • Ash content: 18% ± 2 (at 1000°C) • Bulk density: 500−600 g/l...

...epple-quick - innovative one-component system. Bonds, protects, and seals in seconds thanks to UV technology.

...Dispensing unit for precise low volume dosage The dosage module for the mzr-2505 (S/F), mzr-2905 (S/F) and mzr-4605 (S/F) pumps can be used for volumetric dosage of adhesives like UV cure adhesive, epoxy resin, screw fixing varnish, lubricants and silicon. The dosage module suits the dispensing of smallest amounts of liquids requiring highly precise handling (small beads or spots) and the...

...For the drying and polymerization of UV-curable screen printing inks and UV adhesives, for circuit boards, laminated materials, plastics, paper, glass, metals, and other printed materials in a continuous process.

... where high strength and transparency are especially important. Product Details: Permabond UV620 1K Methacrylate Ester Character: UV Adhesive Wavelength of curing UV light: 365 - 400 nm Color: Transparent Gap bridging: 1.5 mm Viscosity: 25 Pa.s Processing time: see TDB Functional strength (depending on UV intensity): 5 - 10 seconds Final strength: after exposure Tensile strength: 14 MPa Operating temperature: -55 °C to +120 °C Net weight: 0.05 EAN: 4260534181255 ml: 50...

...DREI BOND has an extensive portfolio of advanced adhesives and sealants and has been a recognized system supplier to the automotive industry for decades.

...Dimensions: 4mm groove / 13mm flange, Colors: black, white, brown Material: high-quality TPE (Thermoplastic Elastomer, based on SEBS) aging, weather, and UV-resistant, compatible with acrylic paints and all other currently common coatings. Colors: black, white, brown Dimensions: 4mm groove / 13mm flange Dimensions: 4mm groove / 13mm flange...

...Single-component, elastoplastic joint sealant based on acrylic dispersion in a low-shrink formulation. The product is solvent-free, UV-resistant, and non-yellowing.

...Thanks to its wide range of elasticity from rigid to stress-relieving to very flexible, DELO PHOTOBOND meets the diverse requirements and materials for durable bonding. Bonding joints become nearly invisible and provide the right appearance. The seconds-fast curing using UV and/or visible light allows for the shortest cycle times in production. In addition to the adhesive, DELO offers special LED lamps that enable reliable and fast curing while ensuring a safe process. https://www.delo.de/klebstoffe/delo-photobond-lichthaertende-klebstoffe/...

... also utilized in other industrial applications, such as drying paints and coatings or curing adhesives and casting compounds. The jetCURE product series consists of the jetCURE LED, jetCURE UV (conventional UV technology), and the jetCURE IR (available as either an IR or an IR/warm air dryer).

...-contrast adhesives, paints and seals can be shown in high contrast with ultraviolet radiation. Presence and completeness monitoring is thus made easier for the camera. The finest cracks, such as in cast parts, can be made visible with the aid of fluorescence. Operation mode:Continuous/ switching or Flash Illumination colour:UV365, UV400 Protection class:IP67...

...FENOPLAST® PMMA swelling adhesive is a special adhesive for the structural bonding of PMMA / acrylic-coated plastics. Thixotropic and transparent, it is ideally suited for bonding heavily stressed PMMA plastics in various industries. Excellent UV resistance and very good temperature resistance complete the overall package of its outstanding properties. Areas of Application FENOPLAST® PMMA...

...MD-UV adhesives react to UV light exposure. Curing occurs within seconds. We achieve clear, high-strength bonds, for example, between glass and metal. The UV curing technology offers the advantage that the timing of the curing can be freely chosen, and short curing times allow for higher production speeds. Tailored viscosities for every application case. - Communication electronics - Consumer...

... commercially available binders such as urethane, polyether, and epoxy acrylates. Possible applications are as follows: • Adhesives • Parquet oils • Wood stains • Inkjet • Process colors • Printing inks • Films • Gelcoats • Can coatings The colored pigments used have been selected for their high transparency. Lightfast and chemical-resistant pigments are employed. The color pastes do not contain photoinitiators and are very stable in storage. The products are easy to incorporate, flowable, and pumpable.

... resistance of 95 °C – 120 °C, UV resistant Suitable for outdoor use Disposal and environmentally friendly cover Excellent price/performance ratio Optimized raw material and component sourcing from Central Europe Custom roll formats made to customer specifications Total thickness: 0.4 mm Widths: 15 mm, 19 mm, 25 mm, 30 mm, 38 mm, 50 mm, further options available upon customer request Lengths: 33 m...

...Adhesive Tape Materials Transfer Adhesive Tape Materials Papers and films that are coated in a grid pattern on one or both sides with hot melt adhesives and UV cross-linked adhesives. Double-sided adhesive papers and films that are coated in a grid pattern on one side with hot melt adhesives and UV cross-linked adhesives.

... polyurethane gel for industrial applications as well as for the media and advertising industry. Polyurethane gel pads with a colorful printed insert are ideal advertising carriers. PROPERTIES: • shock-absorbing • high tear resistance • UV resistant • adhesive properties adjustable • solvent-free • plasticizer-free • temperature resistant between -40°C and +90°C RAW MATERIAL: • adhesive (without skin) • non-adhesive (with skin) • sheet goods up to 300 mm width and up to 500 mm length (in various thicknesses) CUSTOMIZATION: • die-cut parts...

... fluctuations, and solvents. Its transparency ensures that adhesive connections remain nearly invisible. VHB™ LSE-110WF can replace mechanical joining methods such as rivets, welds, screws, and liquid adhesives, and it adheres indoors and outdoors even at low temperatures. This VHB™ tape saves welding costs, eliminates the need for extensive post-welding work, avoids unsightly visible screws or rivets, and removes the necessity for a primer when bonding plastics. Length: 33 m Width: 12 mm...

...Weather-resistant, neutral curing, one-component silicone sealant with a low modulus of elasticity. Very well suited for structural glazing, metal facade construction, and expansion joints on building facades. Compatible with all DowSil Golden Range construction adhesives and insulating glass sealants for structural glazing. High movement accommodation of +/- 50%, excellent weather resistance, including UV radiation, across a wide temperature range. Easy to handle and ready-to-use product. DC 791 complies with ISO 11600 F&G-25LM, ISO 9047 Class 50%, DIN 18540, SNJF Vitrage Facade Category 1.

... pure, extremely fine titanium dioxide, can be avoided. The effectiveness of these titanium dioxides develops fully within a very short dispersion time. Applications: Paints and Coatings: Printing inks / dispersion paints and coatings for indoor and outdoor use Plastics & Paper: Coated fabrics / profiles / floor coverings - PVC / paper - cardboard Construction Industry: Roofing materials / surface coatings / adhesives...

... combined with UV absorbing / blocking films. Natural rubber adhesive systems prevent film lifting during profile cutting and handling. For aluminium profiles mainly black / white films with customer print as well as occasionally black films are used. Our product range includes product with weather resistance between one month and twelve months.