titanium bar Germany

For over 25 years, ANKURO has been supplying semi-finished products, products, and services related to high-performance materials, specifically the so-called refractory metals. We supply and process titanium and titanium alloys, tantalum, molybdenum, TZM, zirconium + zirconium alloys, tungsten, as well as nickel and cobalt and their alloys. We can also assist with other non-ferrous metals such as ...

... special orders, customers can also fall back on medical grades and versions kept in stock. EZM Edelstahlzieherei Mark offers its customers in the medical equipment sector an extensive range of materials and versions – from stainless materials to titanium, and from ground round bars to sections. Drill wires Implants/Bone plates Implants/Screws Titanium implants >> Current alloy surcharges >> Current scrap surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round Max. bar...

... electronic circuitry. Measuring range:0 … 1000 bar Kind of measurement:≤ 20 bar: Against atmosphere Kind of measurement:≤ 50 bar: Against sealed atmosphere Signal output:1 mV/V - 2 mV/V - Depending on measuring range Range of operating temperature:-55 … +150 °C...

... bonding. Outer diameter: 3...150 mm Operating temperature resistance: > 450°C Pressure resistance: > 4500 bar Absolute gas tightness: 1*10^-9 mbar l / s Electrical breakdown strength: > 4 KV Electrical insulation resistance: > 1 TΩ...

...We manufacture turned parts with the highest precision from plastic, aluminum, brass, bronze, steel, stainless steel, and titanium. - Machining of turned parts with driven tools on bar automatics from 2-65mm diameter, including back machining. - Chuck machining up to 160mm diameter on vertical and horizontal lathes with driven tools.

... measurement With us, you can rely on the high-quality processing of the following materials: - All aluminum alloys and non-ferrous materials such as copper, brass, nickel silver, bronze - Stainless steels: including V4A, V2A - Titanium - Steel materials - Plastics/PEEK...

...Range from 350 mbar to 70 bar Overall accuracy up to ± 0.1 % FS Construction from stainless steel or titanium Wide temperature range from -40 °C to +80 °C Low power consumption Filter setting definable by the customer Excellent long-term stability Compatible with liquid pressure media that are compatible with stainless steel 316L, Hastelloy C276, or titanium...

...Robust, pollution-tolerant, and reliable products. Operating pressure up to 35 bar. Approval from Lloyds, DNV, ABS. Optional end caps made of bronze, titanium - tube bundle. Stainless steel series.

...steel, stainless steel, brass, copper special alloys, titanium Options: - Machining centers with 4th and 5th axes - Tool magazine with 63 slots - High-pressure coolant supply through spindle up to 63 bar - CAD system - SolidWorks with interfaces to all common CAD systems Post-processing: - Hardening, grinding, electroplating, phosphating, anodizing...

...The ECOFORCE Ti 9/13 is the modular solution leading in machining titanium structures Full range of pallet sizes from the ECOSPEED series available between 1 x 4 m up to 2.5 x 8 m 2D head made for Timachining with 8,000 rpm / 940 Nm (S1) or 5,600 rpm / 1,300 Nm (S1) known 100 bar coolant supply for longer tool life Modular concept with multitude of options for all customer needs Spindle speed rpm:8,000 Torque (S1) Nm:940 Taper:HSK-A100 Number of tools:470 Pallet size height mm:1,000 / 2,000 Pallet size width mm:4,000 / 8,000...

...Diameter ranges: 0.5 – 65 mm from the bar 66 – 150 mm as sleeve parts Materials: Automatic steels, C steels, heat-treated steels Stainless steels in grades A1 – A5 Brass, aluminum, copper, nickel silver Titanium, various plastics...

... measurement Technical Data: Installation type: Thread Installation position: Any Temperature: max. 120°C (Polyolefin up to max. 100°C) Pressure: max. 10 bar Technical Data Housing material: V2A / 1.4305 Cover and cable gland MS nickel-plated Electrode material: V4A / 1.4571 (HAC-C4; Titanium) Coating: Kynar (alternatively Polyolefin) O-rings: FPM Options: Mounting bracket material V2A / 1.4301 Cable gland material V2A / 1.4301 Accessories: Connection cable with numbered conductors...

... compression greater than 200 psig (15 Bar abs). Low pressure compressors are available to 30 psig (3 Bar abs), and 20,000 CFM (34,000 m³/hr). As a result, NASH offers the widest pressure and capacity ranges of liquid ring compressors available worldwide.

...A high-pressure water jet of over 3800 bar cuts through metal, glass, ceramics, titanium, aluminum, brass, stainless steel, wood, as well as foams, sealing materials, rubber, cork, hard fabrics, and much more. The cold cutting process ensures the dimensional stability of the material. It is neither thermally nor chemically affected. Advantages: all materials can be cut with just one tool, high edge quality, intricate contour cuts, high material utilization, no toxic fumes or gases, no dust generation, material thicknesses up to 200mm, no subsequent deburring required.

...In our turning area, several numerically controlled lathes are available. Materials: Stainless steels, stainless steel, aluminum alloys, plastics, copper alloys, titanium Technical Information: Turning diameter: from Ø2 to Ø250mm Bar passage: Ø32mm and Ø50mm Maximum distance between centers: 600mm...

...Robust and high-quality military wristwatch for men. Traser Military Wristwatch 100201. Robust and high-quality military wristwatch for men. Strap Material: Titanium Case: Titanium Movement: Automatic Case Diameter: approx. 46 mm Water Resistance: 10 bar...

... our warehouse in Dinslaken. We manufacture according to national and international norms and standards, such as DIN, ISO, EN, NORSOK, ASTM, or AMS. Please contact us - we would be happy to create a suitable offer for you. Contract manufacturing: Titanium (semi-finished products, components, foil, round bar, wire, screws, nuts, Ti-AMS 4911, tantalum, zirconium, niobium, tungsten, molybdenum, copper, nickel, stainless steel, alloys, sintered alloys...

...titanium, tungsten, molybdenum, bronze, nickel silver, etc. Profiles (flat, square, hexagonal) are available in all common materials (stainless steel, nickel silver, brass, bronze, copper, aluminum, titanium, etc.) • on spool • in ring • or as bar • as well as special profiles according to drawing PRECISION TUBES • outer diameter starting from 0.2mm • wall thickness from 0.05mm • material: stainless steel, titanium, copper, nickel silver, bronze, brass, aluminum and • special materials such as tantalum, NiCr, Monel, nickel, etc. Refractory metals: tungsten, molybdenum, tantalum, niobium...

...Plate, Forged Square Bar (MultiSpec): thickness from 5mm to 160mm, width from 20mm to 370mm, length from 500mm to 6500mm. Sheet: thickness from 2mm to 5mm, width from 20mm to 450mm, length from 1500mm to 5000mm. Forgings: Small to medium sized forgings can be quickly produced for our customers as required. Wire: Grade 2 and Grade 5 welding wire drawn at our high volume German based production...

... sectors such as: Aerospace, Automotive, Offshore, Medical, and many other industries. In our warehouse, we have alloy Ti6Al4V (=Grade 5/3.7164/3.7165), Grade 1-4, Grade 7, 9, and 12 according to various aerospace or medical specifications. Due to the high demand for titanium, our stock changes quite quickly and consistently.

... tolerance requirements, such as: - Bushings, nuts - Washers - Spacers - Sleeves and similar items. Diameter up to a maximum of 42 mm. The following materials are processed: - Case hardening steel - Stainless steel - Alloy steel - Brass - Aluminum - Plastics - Titanium Other materials available upon request. We currently supply the following industries: - Electrical industry - Medical technology - Mechanical engineering - Sensor technology - Aerospace...

... deliver just in time: At S+D we are able to cut all our materials according to our customer’s exact requirements utilising our "state-of-the-art" bar saws and plate saw. We also offer precision water jet cutting. Our Just-in-time service provides our customers with cost savings and security of supply. We are organised professionally: Our customers are served by experienced product experts with...

... wind turbines - Explosively clad steel materials with high titanium or copper content - Container tanks - Welded steel pipes - Rails and rail accessories - Special welded constructions - Containers and steel covers - Bar material made of steel The heat treatment processes applied are essentially: - Stress relief annealing - Soft annealing - GKZ annealing - Normalizing - Diffusion annealing / homogenization annealing - Coarse grain annealing - Recrystallization annealing - Tempering in air...

... diameter, using materials such as non-ferrous metals, steel, titanium, nickel alloys, plastics, and hard paper. The combination of modern machinery, years of experience, and optimal teamwork guarantees our customers significant flexibility while maintaining high product safety. This is also evidenced by our quality management system certified by TÜV-Nord (DUNS No. 344040019) according to DIN EN...

...-grain construction steels according to EN 10028-3 (P355NL etc.), chromium-nickel steels (1.3964, 1.4301, 1.4306, 1.4361, 1.4406, 1.4435, 1.4462, 1.4529, 1.4539, 1.4541, 1.4571, etc.), copper and copper alloy (SfCu, CuNi10Fe, CuNi30Fe, etc.), nickel-based alloys and pure nickel (ALLOY, MONEL etc.), titanium. Cladding from all the aforementioned material combinations. Additionally, we offer customized internal and/or external coatings for all products. For example, seawater and acid-resistant coatings for the inside of pipes and the pipe plate are part of our repertoire.

... the automotive and motorcycle tuning sectors. Our standard services include bar and chuck machining for high-precision turned parts with material diameters up to 42mm (bar) and 160mm (chuck), processing with counter spindles and driven tools, drilling and milling as single and series production on CNC milling machines using CAD/CAM programs, and aluminum die casting with a casting weight of up to 1.5kg. Furthermore, we take on turning and milling orders for small and large series in titanium and Inconel.