stainless steels products Germany

... products for clean room applications such as those used in the pharmaceutical industry, medical technology and in the food industry. Funnels and reducers from Ø 70 - 900 mm invisibly ground weld seams carefully smoothed transitions to avoid product buildup suitable for clean room applications uniform wall thicknesses free of tension and distortion...

...Turned parts, CNC turned parts, long turned parts Part diameter: 0.3 to 200 mm Parts Length: 1000 mm Materials: steel, stainless steel, brass, aluminum and plastic In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.

... special orders, customers can also fall back on medical grades and versions kept in stock. EZM Edelstahlzieherei Mark offers its customers in the medical equipment sector an extensive range of materials and versions – from stainless materials to titanium, and from ground round bars to sections. Drill wires Implants/Bone plates Implants/Screws Titanium implants >> Current alloy surcharges >> Current scrap surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round Max. bar...

...ARA-T offers you the opportunity to obtain stainless steels. These high-strength materials are corrosion-resistant, weldable, conductive, and provide additional benefits such as temperature resistance, durability, and a high level of cost-effectiveness. In addition to semi-finished products made of stainless steel, we offer stainless steel turned parts, stainless steel milled parts (CNC), stainless steel screws, and other fasteners.

... steels but superalloys. Therefore, the use of the term "molding" is correct in this context. Forged parts by stamping and molding: unit weights from 200g to 130Kg All grades of forgeable steel: stainless steels (F316L, duplex), nickel-based alloys, superalloys, titanium Standards and certifications: DESP, RCC-M, KTA, AD 2000 International shipbuilding: ABS, BV Marine & Offshore, ClassNK, DNV, LR...

...,stainless steel valve, copper machined plate, brass bush, brass sleeve, brass nut in nickel plated,copper screws, red anodized aluminium holder, blue anodized aluminium CNC milling plate, anodized mechanical parts, copper gold plating handle, zinc plated screws, custom made CNC turned part,ShenZhen mechanical parts supplier, critical cnc machining parts, precision mechanical parts, mechanical parts for camera, Stainless steel high polishing part, pump and valve mechanical accessories, Optic mechanical products, High quality precision machining parts, Nitrating steel shaft,machined mechanical p...

... minutes. The product inspection system XRE-D X-ray inspection system detects all foreign objects, which due to their density, chemical components or mechanical dimensions absorb X-rays at a higher or lower degree than the surrounding product. During production numerous detection tasks can be safely fulfilled such as the detection of metals, glass, ceramics, stones, raw bones, PVC, Teflon, rubber, glass fibre reinforced plastics etc. In packaged or unpack-aged food (non-magnetic stainless steels and non-ferrous metals in aluminium packaged food). X-Ray inspection is an ideal solution for...

...We take the right turn! In the area of ​​turning technology we can offer you a spectrum of prototypes, zero series and small series as well as the production of large series as a powerful partner. We process all materials, e.g. Such as automatics, tempering, stainless steels, aluminum, brass, copper and more! Max. Diameter when working rod and / or coil: Ø 65 mm Max. Diameter when machining sections: Ø 380 mm Max. Working length: 500 mm All common heat- and surface- treatments possible Assembling and more…...

... problems. Would you like to have more detailed information on our special designs? Why not contact us directly? We will be happy to assist you. Milling of profiles Special concrete designs Rings for placing Shore test specimens Milling of dumbbell test specimens for tensile tests Multiple test specimens according to DIN 53281ff Stainless steel rings for tests according to EN ISO 10563 Spacers for standard joints according to ISO 11600 Spacers for elongation test according to ISO 11600, made of aluminum or PMMA in various % values Feed mechanisms...

...Machine construction carriers, drive and guide rails, 3D sheet metal assemblies, standard semi-finished products, up to L=6000mm, stainless steels, high-strength steel, duplex, structural steel. Welded assemblies today must meet high standards of dimensional accuracy and reproducibility, as they form the basis for complex machine and plant engineering constructions. Due to the various fields of...

... important quality factor. Municipal/industrial waste water and sludge or certain processing, intermediate and end products from the chemical, pharmaceutical and food processing industries set high requirements regarding the tank material, for example. LIPP offers a variety of materials, ranging from galvanised steel through the combination material Verinox to high alloy stainless steels. APPLICATIONS...

...We manufacture versatile wire bending parts, pipe bending parts, and stamped bending parts for automotive manufacturers and suppliers or system providers. This includes various wire bending parts for seats, such as Isofix, exhaust systems, bodywork, as well as convertible roofs with wire diameters ranging from 0.6 to 18 mm. Complex assemblies that combine wire, pipe, or sheet metal are also part of our offerings. The materials we can process include all cold-formable steels, stainless steels, and non-ferrous metals in the form of wire, pipe, and strip.

...In the field of precision engineering, we are pushing the boundaries of technical feasibility. Especially in the micro range up to 30μm tool diameter, we demonstrate our skills and sensitivity for precision using micro tools. Machines are employed that have spindle speeds of up to 50,000 rpm. In addition to standard stainless steels, brass, or aluminum, we also process exotic materials such as titanium, Hastelloy, Invar, Kovar, or Nemonic.

...Precision sawing is the process for producing aluminum profile and tube sections. Using solid carbide tools, we create high-quality and low-burr saw cuts. A wide range of materials can be processed, from simple construction steels to highly alloyed and stainless steels or non-ferrous metals. End machining or deburring operations are offered as options. - Processing of cross-sections from 4 to 1200mm² (approximately Ø2 to 40mm) as profile, tube, or round material - Cutting lengths from 5 to 600mm - Length tolerances of up to ±0.02mm possible Cross-section: 4-1200mm² Cutting length: 5-600mm...

...Manufacturing of 1.0 - 16.0 mm from various materials Manufacturing of 1.0 - 16.0 mm from the following materials: • Iron wire • D9-1 bright drawn • D9-1 galvanized drawn • Iron wire zinc-aluminum coated • St.37-K, St.52-3, etc. • stainless bright steel, e.g. 1.4301 and similar • spring steels, type SM / SH, phosphated or galvanized • stainless, material: 1.4310 • aluminum • brass...

... iron, heat-treated, and stainless steels. These molds are created by dipping in ceramic slurry layer by layer, followed by sand application. The shells must be dried between each layer. This process, which typically takes several days, is shortened to just a few hours through the use of a drying tunnel. Subsequently, the models are melted out and the ceramic is fired. After pouring metal into the molds, the ceramic is mechanically removed. The parts are then separated and finished.

...The manufacturing includes precision stamped parts with thicknesses ranging from 0.30 mm to 6.0 mm according to drawings, as stamped-bent parts, as stamped-embossed parts, as deep-drawn parts, as well as washers, specifically for combination screws and nuts. Application-specific materials used are: steel/stainless steel, brass, bronze, aluminum, heat-treated steels, spring steels, as well as special materials according to customer specifications.

...In our product range, you will find a comprehensive supply program of hollow steels. The material savings with hollow steel allow you to reduce costs, making it an economical alternative to our more massive products.

...Qualities: e.g. 1.4301, 1.4305, 1.4541, 1.4571, 1.4404, 1.4462, 1.4713, 1.4828, 1.4841, 1.4016, 1.4034 Ferritic grades for the automotive industry: 1.4512, 1.4509, 1.4510 etc. + austenitic grades and aluminized pipes for the automotive industry Product forms: Round bars, sheets + strips (cut pieces), profiles, seamless pipes, welded, stainless, and aluminized pipes Applications: Automotive and shipbuilding, heavy industry, chemical and pharmaceutical industry, apparatus and mechanical engineering...

...We manufacture abnormal cold- and hot-formed screws, nuts, and bolts according to drawings or samples. Available in all standard grades such as 4.6, 5.6, 8.8, 10.9, or higher treated. Also available in stainless materials V2A and V4A/V5A as well as all types of stainless steels and alloys. On request, we can provide all common surface finishes. Many products are available as stock items for you. Product examples: Cone handles Hook screws Scaffold screws Flanged nuts Profile screws L-bands...

...Manufacturing Program Our manufacturing program includes standard parts as well as custom parts that we produce according to drawings or samples. The standard products are available from stock. Here is an overview of our technical capabilities: Dimension Range: M 8 - M 42 Strength Classes: 5.6 - 8.8 - 10.9 - 12.9 Materials: Quenched and tempered steels, case-hardening steels, free-cutting steels, stainless steels...

...We stock over 25,000 items in our extensive standard parts warehouse, covering more than 2,500 square meters. The range of materials includes automatic steel, high-strength materials with strengths from 8.8 to 12.9, stainless steels, brass, and plastics. Surface treatments such as galvanic zinc plating, hot-dip galvanizing, nickel plating, zinc coating with thick-layer passivation, and zinc...

... as aluminum, stainless steel, high-alloy steels, plastics, and carbon steel. We produce individual parts, small and medium series products, as well as complete assemblies including their assembly. Another core competency is the hard machining of turned and milled parts. Through our long-standing collaboration with our renowned external partners, we can also offer you a variety of surface treatments for your products.

... supplier sectors. Our goal is to consistently offer our customers economical conceptual solutions and to meet agreed delivery deadlines. In our facility, we process materials such as aluminum with alloys, plastics like POM, PE, stainless steel, and brass, as well as all common construction and alloy steels. We utilize innovative and proven technologies to create convincing precision products of the highest quality.

...-resistant stainless steels, as well as aerospace steels, tool steels, tungsten and magnesium, copper and brass, plastic semi-finished products, and hard composites (e.g., epoxy resin-bonded fiberglass composites).

...We supply both from stocks and productions wide range of round bars , certified acc to. EN 10204 2.2 and/or 3.1 Steels for General Use of EN 10025 (S235/275/355 JR/J0/J2) Steels for Quenching and Tempering acc. EN 10083-2, EN 10083-3 Steels for Case Hardening acc. EN 10084 (C10, C15, 16MnCr5, 20MnCr5, 36CrMn5 (UNI7845) Micro-alloyed Steels (18MnV5, 20MnV6) Free Cutting Steels acc. EN 10087(11SMn30/11SMn37) Other Grades upon request.  Structural Steel  Carbons Steel  Case Hardening Steel  Heat Treated Steel  Spring Steel  Free Cutting Steel  Tool Steel  Stainless Steel...

...We manufacture custom products according to customer specifications. Materials used: automatic steels, brass, stainless steel, alloy steels, aluminum. We manufacture custom products according to customer specifications. Tailored to geometry, size, and quantity, we utilize various CNC lathes and contour-controlled ring turning machines as well as turret lathes. Materials used: automatic steels...

...-nickel steels (stainless steels). We offer a wide range of welded products, including complex steel components as well as beams up to 36 meters long. Certified plates (US testing, Z-quality testing, weld bending test) can also be welded by us. Additionally, weld seam inspections are carried out by in-house specialists using ultrasonic testing or dye penetrant testing.

... as highly alloyed stainless steels such as: 100Cr6 Cf53 Ck45 X46Cr13 X90XrMoV18 available upon request Processing hardened or unhardened ground turning, drilling, milling, threading, stamping, grinding, knurling, polishing, vibratory finishing chromed and coated available upon request Dimension Range Ø 0.8 mm - Ø 20 mm Length up to 400 mm Tolerances Ø Quality IT6/IT5 Roundness up to 0.5 μm...

...In our precision stamping department, we manufacture for you using 32 t and 63 t Haulick Roos precision stamping machines, along with Vester tool monitoring and Vester lubrication systems. We utilize materials according to your requirements, such as: Tinplate C-steels Galvanized steels Stainless steel and spring steel Bimetals Partially or fully coated raw materials...