stainless steel pressed parts Germany

...Funnel, pressed for measurement and control technology made of stainless steel...

...Housing parts made of steel, stainless steel, aluminium, brass. Made of solid material, profile material, cast blanks and pressed parts. With and without surface treatment.

... type 60 3.1 / 02 Stainless steel hopper type 90 The symmetrical stainless steel hopper type 60 has an angle of 90" and is available for all Mueller drums. Deep-drawn lid rims, pressed cones, butt-welded seams and patented stainless steel valves with clamp closing and hand lever represent Müllers high quality. All parts inside and outside are polished and brushed to a 320 grit. Hopper for Müller drum Type 90 3.1 / 03 Stainless steel hopper type AS The stainless steel hopper type AS is asymmetric and is available for all Mueller drums. The...

...Wall cabinet for outdoor use with heating and ventilation made of stainless steel Wall cabinet for defibrillators in outdoor areas. Heating - Ventilation. Made of stainless steel with a knock button. The lid gently lowers after the knock button is pressed. Equipped with an alarm and lighting. Scope of delivery: Wall cabinet - Knock plates - Mounting materials - Power supply...

...PEKI vertical valve series is made of high quality hot pressed parts and precision turned parts, assembled with modern injection moulded parts and sealing elements made in Germany. Short design with vertical lever arm and float, plastic and stainless steel floats from 3/8 to 1/2″. Material:Brass/Chem. nickel plated/VA Seal:NBR – EPDM – VITON Max. Temperature:70°C – 100°C – 100°C...

...The Columbus elevator bucket is according to DIN15232 and available in pressed (stainless) steel and plastic PE (white)/Nylon (green). Data Columbus Steel Data Columbus Plastic...

...The press-fit standoffs can serve as spacers or spacing elements. The hexagonal head is simply pressed into the sheet metal so that the material is displaced into the groove. The crimping on the head side is done in a completely flat manner. A wide selection of through or blind variants is available. Versions with wider heads and higher tensile strengths can be produced for high-stress applications. Material 1: Steel Material 2: Stainless Steel A2...

...Enclosure construction, shielding plates according to your drawings - assembly We manufacture enclosures, enclosure parts, shielding plates, and shielding enclosures according to your drawings, primarily from stainless steel, aluminum, anodized aluminum (E6EV1), tinplate (solderable), galvanized steel, and sheet steel. Nuts and bolts can be welded or pressed in. The assembly of multiple parts...

... such as forged blanks, pressed or stamped parts, and castings, we provide trough belt blast systems with rubber or steel link belts, as well as drum blast systems. Additionally, impact-sensitive parts can be blasted using the frame method. We manufacture using blasting media made of steel and stainless steel in shot and grit qualities with varying grain sizes and material hardness.

...Our production program includes the manufacturing and complete processing of turned and drilled parts. We work with materials such as automatic, case-hardened, and tempered steel, stainless steel, non-ferrous metals, as well as various plastics. From prototype parts to large series, including pressed and flat parts in large quantities - we produce everything. Precisely and on time!

... plastic fills the area around the barbs, resulting in maximum resistance to axial forces. SPIROL's Press-N-Lok™ pins are typically made from lightweight, lead-free aluminum and are also available in austenitic stainless steel upon request. BP100 Press-N-Lok™ pins are available in diameters ranging from 2mm to 4mm.

...In the plastics industry, support sleeves are used to reinforce plastic parts and prevent deformation. Depending on the application area, we manufacture high-quality support sleeves from steel, stainless steel, brass, or aluminum. A special edge processing technique ensures that the support sleeve does not create any burrs even when pressed in afterwards.

... sluices or, in individual cases, double-gate sluices are used for the pressureless discharge of the material. In order to increase the cyclone effect, or the degree of separation, counter-spirals with a pipe connection can be placed on top of the immersion tube. Further options are, for example, wearing devices, explosion pressure relief devices, control flaps, level monitoring devices and manufacturing in stainless steel or galvanised sheet steel.

... efficient technology offers numerous advantages: we can press parts with precise positioning. Additionally, steel bolts and stainless steel bolts from M2.5 to M6 can be used. With this method, we work significantly faster than with bolt welding, and the result is much more durable than welded bolts. Furthermore, the PEM press-in technology allows for the use of a wide variety of press-in bolts, press-in nuts, and press-in connectors.

...We manufacture sheet metal parts according to your specifications and support your product from the idea to production. Our stamped, drawn, pressed, and bent parts made from wire and strip materials are produced from various materials (steel, copper, brass, aluminum, stainless steel, nickel silver) on stamping machines and eccentric presses ranging from 3 to 120 tons. The tools for the...

...Stainless Steel, AISI 430+303, Guide Tube Brass Connection Voltages: AC 24, 110, 230 V 50-60 Hz DC 12, 24V Power Consumption: C1 12/8 VA 5.5 Watts Duty Cycle: 100% - VDE 0580 Ambient Temperature: +40°C Protection Class: IP 65 according to DIN 40050 Cable Connection: Device Connector DIN 43650...

...The "Robert Winkelsträter GmbH & Co. KG", based in Ennepetal (about 20 km south of Dortmund), was founded in 1952 as a manufacturer of hinges and fittings made of steel and stainless steel. Here, 20 employees manufacture, commission, and distribute products according to your specifications: • Laser-cut parts for sample construction, prototype development, and small series • Stamped and pressed...

... pressure vessels and certification according to ISO 9001: 2015 - that is our quality. We design and manufacture pipe bends, containers, heat exchangers, heating plates, jackets, pipes, deep-drawn and pressed parts according to your specifications. With our X-ray facility and our own pickling shop, we offer the highest quality with the fastest possible delivery times. Our customers in the fields of chemicals, paper, food, petroleum, wastewater, construction, and power plant construction appreciate the quality products of Dannenmann GmbH and especially our quick response and delivery times.

...Johannes Steiner GmbH & Co. KG is a Swabian medium-sized company with a long, proverbial tradition and impressively demonstrates its capabilities day after day to this day. A large quantity of cold and hot pressed parts, coupling nuts, and cutting rings are produced from steel and stainless steel (1.4571 / 316Ti). With experienced, highly motivated employees, modern high-tech facilities, and a logistics center, the company STEINER has been providing the highest quality, absolute punctuality, flexibility, and comprehensive customer service for many decades.

60 years of experience in the field of forming technology, development and design, in-house tool and mold making, modern facilities for metal spinning and deep drawing technology with numerous welding techniques. No shape is too difficult, no customer request too demanding. Every year, millions of sheet metal parts are produced: metal spun parts, stamped parts, drawn parts, and pressed parts as well as laser cuts and assemblies made from steel, stainless steel, aluminum, and non-ferrous metals.

...-scale, and sweep. We can process the following materials: raw steel, galvanized steel, stainless steel, aluminum. Washing Booth The washing booth serves as the pre-treatment center and is designed to wash all substrates, e.g., raw steel parts, galvanized parts, and aluminum for both indoor and outdoor use. All of this, in conjunction with a fresh water treatment system that includes a microprocessor-controlled water softening system and a reverse osmosis system for desalinating clear, iron- and manganese-free pipe water, guarantees the highest quality.

... screws, wire bent parts, welded connections, spring clips, pressed, stamped, and turned parts, pressed, drawn, stamped, and wire parts in assemblies, components for precast concrete construction, welded parts, stud welding technology, round steel brackets DIN 3570 made of steel and stainless steel.

... safety products, hot-dip galvanizing, small stamped parts, ventilation pipe clamps, metal roof tiles, lightweight metal roof panels, mounting consoles, pressed parts, downpipe fastenings, pipe fastenings, pipe clamps, stainless steel pipe clamps, pipe clamp systems, and more.

... manufactured in batch sizes from 1,000 pieces to 100,000 pieces. * All steels, case-hardened and high-strength nitriding steels, stainless steels, non-ferrous metals, as well as flow-pressed, sintered, and forged blanks are processed. CNC Milling We process steel and stainless steel as well as cast blanks with µ-precision on our CNC-controlled machining centers. Mechanical Manufacturing In our...

... to 4 mm thickness; silver; alpaca; Inconel. Deep drawing is an interesting alternative to metal spinning for economical batch sizes. High precision, consistent material thicknesses, and fast production times are typical characteristics. In deep drawing, we have the capability to process parts with a length of 1000 mm and a width of 700 mm. The maximum depth of a part can be drawn up to 350 mm. Our other products: forming technology, metal hemispheres, metal funnels, metal spun parts, pressed parts, stamped parts, drawn parts, apparatus and container construction, sheet metal processing, etc.

... sophisticated laser parts that meet the high demands of our customers. Our specialized products include electrical sheets for electric motors, stators and rotors, custom cuttings for the automotive and industrial sectors, as well as high-precision tuning plates that are used worldwide by our valued customers. Our commitment to quality, reliability, and customer orientation has made us a preferred partner for companies seeking outstanding laser technology solutions.

...Our company was founded in 1954. Since 1990, the plant has been located at Wertstraße 10, 73240 Wendlingen. The 2600 m² factory site, with a built-up area of 1595 m², is situated in the industrial area "Wert". Today, the company employs around 10 staff members. Our products mainly consist of pressed, drawn, stamped parts, prototype parts, and assemblies. The materials used are steel, fire...

Delivery program: precision roller chains according to DIN 8181, 8188, 8189 and factory standard, in standard version, with straight plates, in reinforced version made of stainless steel and in nickel-plated version, with attachments according to DIN standard or factory standard, with closed, flow-pressed rollers, pre-stretched according to DIN. Bush conveyor chains, hollow pin chains, tooth plate chains, sprockets and sprocket wheels, pre-drilled, finished or according to drawing. Cast parts in all qualities according to customer drawing.

The focus of our company is on the production of pressed, stamped, and drawn parts made from steel and stainless steel, as well as new materials and copper. We manufacture, for example, pots, sleeves, filter discs, metal hemispheres, hand wash basins, and food containers. We guarantee precise manufacturing according to customer-specific requirements. We advise you in the production from prototype parts to series parts.

... service provider in the field of surface finishing for the metals listed below. - Brass - Aluminum - Stainless steel - Titanium The workpieces are primarily produced using all common casting processes or are delivered as pressed, stamped, or drawn parts. Turned and milled parts made of brass, aluminum, or stainless steel can be completely manufactured by us according to drawings or samples, or...