power switches Germany

...These high-power bimetal operated temperature switches are available either with normally closed (NC) or normally open (NO) contact configuration. The robust round metal enclosure accommodates a resilient preloading disk, a bimetal disk and a silver contact. The compact switch system is covered by means of a plate which also carries a silver contact and is isolated from the enclosure by means of...

...The proven technology of the AS 20xx series is characterized by its extreme robustness. Modern microcontroller technology ensures precise control of the device components. Continuous development makes these welding machines one of the most reliable welding power sources for stud welding with lift ignition: intuitive operation with graphical display, rotary switches in a clear control area.

...The Deye micro-inverter converts the generated solar power into grid-compliant electricity and feeds it directly into the home network, where it can be used immediately. This inverter is mounted directly under a solar module and is solely responsible for the connected solar modules. By connecting multiple micro-inverters, the solar system can also be easily expanded later on.

...Connection cable for temperature switches, temperature fuses, and temperature sensors with flat plug connections 6.3 x 0.8mm. Design with sealing lip for dust and moisture protection.

...Connectors in the Field of Automation Technology - Voltage and Power Supply - The connectors for voltage and power supply are used to power AC motors, drives, and motor switches over extended periods with high voltages, but also for low-voltage applications such as fieldbus Ethernet components and network devices. Primarily, these are M12, M18, and 7/8-inch circular connectors that can be...

...Application Areas at the Customer Installation in combined heat and power plants, biopower plants, coal-fired power plants, nuclear power plants Special design of complete control cabinets Features of Our Valves Steam suitable High temperatures up to 240 °C High pressures with large nominal diameters Limit switches for OPEN/CLOSE Low power consumption ATEX...

...Everything about the power supply. Switches, fuses and main power switches for motorsport.

... ✓ Operation of the consumer with over-excitation and/or power reduction ✓ Regulated output voltage (during reduction) ✓ Easy adjustment of holding voltage and over-excitation time via DIP switches ✓ Fast or slow shutdown ✓ Condition detection of the anchor disc (release and drop detection) ✓ Preventive function monitoring (wear and fault detection) - warnings are issued before critical conditions arise, ensuring the brake can still operate, e.g., in case of wear Analog OUT ✓ Control of the resulting clamping force of the brake rotor...

... foot switch is uniquely designed to allow inclusion of additional equipment: — Emergency Stop button — Contactor on DIN rail as main power switch — Customized installations (e.g. light indicators) Function:control Type:single pedal,2 pedals,3 pedals Other characteristics:with cover,rugged...

...Full power for your production environment and comprehensive solutions for control cabinets and fields Our modular power supply concept "connectPower" meets all your requirements. The power supply products can also be universally used in conjunction with our Industrial Ethernet, our surge and overvoltage protection devices, as well as our relays and semiconductor switches, and are combinable for many complete solutions.

... to 20 mm Diameter 100 to 1,800 mm Gears internally and externally toothed hardened and ground Modules 2 - 50 mm Diameter 100 - 2,000 mm Locking shafts internally and externally toothed hardened and ground Modules 1 - 50 mm Diameter 50 - 500 mm Length up to 1,500 mm We manufacture for various customers: mining, railways, wind power, shipping, industry, and special machinery. Production is...

For over 25 years, MicroControl has been a leader in CAN bus applications for industries such as mechanical engineering, automotive, and medical technology. We provide high-quality solutions for converting analog to digital data, support Industry 4.0, and offer customized hardware and software solutions. From "1.I/O modules" to training, we are your partner for innovative automation technology. Vi...

...The fully equipped electric actuator already includes the motor-reducer unit, including the motor brake, a 2-channel sound reflection sensor, and two limit switches. All connection lines are directly accessible to facilitate commissioning, especially for operation via power line communication (PLC).

...Type UPS Module Category DC Power Supplies Design UPS Module Application The UPS module, in combination with regulated or unregulated SBA DC power supplies, provides an uninterrupted 24 V DC power supply. In the event of a failure of the 24 V DC control voltage or a power outage, it seamlessly switches to battery backup operation to prevent: - hazardous conditions for operating personnel...

...Simple automation directly using the control system without software and/or PC - Operation with limit switch or via power consumption - Left/right operation and speed control directly on the housing - Option for external switches/joysticks - Various modes of operation, such as tip operation and start to finish (semi-automatic) - Various adjustable acceleration ramps - Power supply via 24V/2.5A Protection class:IP30 Motor type:direct current motors...

... The standstill heaters presented are intended for use in electrical machines. They are available in a wide variety of power ratings, heating band lengths, or supply voltages. Self-limiting and ATEX-certified standstill heaters are also produced for use in explosion-prone areas.

...In-line filters for currents from 0.5A to 1000A in various designs. A comprehensive range of EMC filters for single-phase and three-phase systems. In addition to in-line filters up to 1000A rated current, there are also IEC input filters combined with switches/fuses or small modules for printed circuit board mounting. In all power classes, there are both 2-stage filters with a very wide attenuation spectrum and 1-stage filters for a more narrowly defined interference spectrum. For connection, there are variants with screw terminals, plug connectors, or threaded bolts.

...Built-in calibration, potential separation, configurable via DIP switches, easy installation on BACCANO mounting rails, optionally available in IP65 protection class. FEATURES — Accuracy < 0.05% — ± 5 V, ±10 V and 0 of the outputs (4) - 20 mA — 6 cable technique — Isolation between the signal and electrical power supply — Cut-off frequency 1 kHz, 4 kHz optional — Configuration via DIP switches...

...16mm Point-Illuminated Piezo Switch for Harsh Environments 20mm Outer Diameter 16mm Installation Diameter Point-Illuminated, Various Colors IP68 10mm Depth 100mA, 35V Switching Power (DC) LED Voltage: Red & Yellow: 1.7V; Green, Blue & White: 2.8V (20mA) Pre-wired: 15cm Stranded Wire Anodized Aluminum (in Various Colors) Single-Pole Open Collector (Normally Closed) Finger Dome Shape Vandal Resistant Installation Diameter: 16mm Protection Class: IP68 Housing Color: Natural (Silver) Anodized...

...A manually operated main switch must be provided for each power supply to disconnect the electrical equipment of the machine from the grid (e.g., when working on the electrical equipment). - Designed as a load disconnect switch according to EN 60947-3 for the utilization category AC-23B - Manually operable with only one OFF and one ON position, clearly marked with 0 and I - Visible isolation distance or switching position indicator, which can only show the OFF position when there is sufficient isolation distance between all contacts according to EN 60947-3...

...Application of the 19" control cabinets: For example, in control engineering, elevator construction, mechanical engineering, plant engineering, crane construction, measurement and control technology, wiring technology, electronics industry, wind power.

...Slim-Type Switch for DIN Rail Mounting with Connection for Redundant Power Supply! The switch for industrial applications, control systems, control cabinets, etc., features a detachable mount for DIN rails according to EN 50022 (35 x 7.5mm) on the narrow side. The power supply is provided via a terminal block and can be implemented in a dual configuration for redundancy purposes. Additionally, a potential-free relay contact allows for the establishment of failure notification lines.

... allows for a configuration specifically tailored to each requirement while also providing the necessary flexibility. The machine's design primarily focuses on the needs that arise from its later use. Working Area (W x L):: 1,330 mm x 830 mm Dimensions (W x L x H):: 2,730 mm x 1,970 mm x 1,600 mm Material Passage Width:: 1,642 mm Table Passage Height:: 15 - 55 mm (without material carrier) Laser Power:: 60 to 450 Watts Speed:: 1 - 1,414 mm/s (in 1 mm increments) Acceleration:: max. 14.1 m/s²...

...EGE amplifier for Ex proximity switches complement the intrinsically safe EGE sensors. They are used for switching point adjustment and provide functional and output indications as well as the output signals. They also provide the 30 V DC or 127 V AC or 230 V AC power supply. The devices can be set up intuitively using a potentiometer and have a cable break and short circuit monitoring feature. The NC/NO contact output functions can be adjusted. The analysis devices are intended for top-hat rail assembly in a control cabinet in the non-explosive area.

...and protective cabinet applications Long service life Rich optional additional equipment Application Area The proven Ritter load break switches were originally designed for the subway construction in Munich for the 1972 Olympic Games. Since then, public transport companies worldwide have shown interest in a DC load break switch, and currently, the RGL load break switch is in use on all continents with over 6,000 units deployed globally. The RGL switch can be used with all DC power supplies with busbars or overhead lines.

... rest position in case of power failure. The pneumatic positioning eliminates the need for electrical wiring and also prevents EMC emissions. In the driving mechanics, non-metallic materials are used wherever possible. Expandable with additional pneumatic axes such as key switches or button activations.

...The waffle maker with 2 cooking units in the shape of Brussels waffles stands out not only for the high heat conductivity of the cast iron plates but also for its robust structure and power. The two separate on/off switches also allow for easy and tailored use. Material: Stainless steel Plate material: Cast iron, enameled Separately adjustable cooking units: 2 Plate model(s): Fixed Waffle shape: Brussels waffle Temperature range from: 50 °C Temperature range up to: 300 °C...

... regulation, reaches up to 20,000 rpm and ensures maximum efficiency at every power stage because, thanks to the integrated HiDry automatic control, it continuously monitors the current flow rate in m³, and the VX 5 automatically adjusts for optimal air flow. Just press a button, and the device switches, as selected, to a higher power class or, if necessary, to the additionally available silent mode.

... construction hoist or transport platform (enabled by two separate controls), safety features (limit switches, safety catch, overload protection), and the use of the uniform GEDA UNI-MAST are just a few of the compelling arguments for the GEDA 300 Z/ZP. Transport Goods: People and Materials Mast System: GEDA UNI-MAST Load Capacity (Materials): 500 kg Load Capacity (People): 3 People Lifting Height: 50 m Lifting Speed: 12 m/min Power Connection: 1.9 kW / 400 V / 50 Hz / 16 A Platform Size: 0.95 m x 1.35 m x 1.1 m / 1.8 m...

...-adjusting to maintain the lifetime of the seals. The big travel of up to 40 mm offers different end positions in the opening and closing process. Usage of the locking:Automatic pull & push lock  Way of locking:Motorized locked  Nominal voltage:24 V V Duty cycle:10% ED % Power consumption:19 W W Max. static holding force:400 N N Max. load force for electrical unlocking:400 N N Connection:Male 15-pin D-sub-miniature connector  Snap-in function:Yes  Emergency opener:Yes  Operating temprature:0 - 80 °C  Dimensions:117 x 227 x 30 mm ...