hydraulic heads Germany

...We offer various joint heads for hydraulics: the series FPR..S, FPR..CE, FPR..N, FPR..U, FMA…D, FS..C, and FS..N. All heads are available in different sizes, housings, materials, and lubrications, as well as varying DIN standards. Here, a distinction can be made between weldable hydraulic joint heads and heads with internal threads – some of which are clampable.

...The Model 716/PK is particularly suitable for unwinding and rewinding with cores. PNEUMATIC CLAMPING HEADS WITH WEDGES The Model 716/PK is especially designed for unwinding and rewinding with cores. The clamping head body is typically available in steel, while the clamping elements (wedges) can be coated in hardened steel, aluminum, or rubber depending on the application. It is available with a...

...We produce STC-Steyr® spherical joints in both maintenance-required and maintenance-free versions, sealed and unsealed. Furthermore, we differentiate between standard spherical joints and hydraulic spherical joints. Of course, we also manufacture special designs made from special materials or with custom threads, as well as products for particularly high loads.

...{"Application Field":"Rivets larger than 6.4 mm Ø of any material and collar rivets up to 10 mm Ø with the corresponding heads.","Equipment":{"1 bottle of hydraulic oil 100 ml":"","1 refill bottle of oil":"","Service manual with parts list":""},"Material":"Steel, Plastic","Technical Data":{"Operating Pressure":"5-7 bars","Pulling Force":"42,000 N at 7 bars","Air Consumption":"approx. 6.9 ltr. per rivet","Stroke of the Device":"17 mm","Tube Connection":"6 mm Ø (1/4’’)","Weight":"3.4 kg"}}...

...-resistance range and one for the high-resistance range, and an automatic hydraulic unit. Measurement range Hiresta: high-resistance range 10^3-10^14Ω Measurement range Loresta: low-resistance range 10^-4-10^7Ω...

...the peeling heads of the SK series are used as individual tools or in combination with GZ smooth rolling tools. Short hydraulic cylinders with a length/diameter ratio of approximately L/Ø ≤ 15 can be completely machined directly on the lathe using ECOROLL tools from the SKIOC and GZ series.

...forestry, recycling, hydraulic technology, drive technology, construction machinery, construction equipment, fire service, energy technology, special solutions, cable car technology, railway technology, buffers, buffer plates, buffer systems, running rollers, mining accessories, mining technology, drilling platform, drilling technology, drill heads Die-forged parts: up to 130 kg Maximum length: 600 mm Steel grades: heat-treated steels, nickel-based, chrome-vanadium, molybdenum, alloyed, unalloyed, corrosion-resistant Special steel: titanium alloys, titanium-stabilized CrNi steels, molybdenum, vanadium...

...The USM 150 hose peeling machine is a robust UNIFLEX premium machine designed to peel up to 5" industrial hoses with ease. The double-arm peeling tool with reinforced peeling spikes can be controlled both together and individually, without the need for retooling. With the USM 150, we offer you a perfect addition for your hose processing needs. The USM 150 features a pneumatic clamping unit and ergonomic feeding. Both clamping heads can be controlled individually. User-friendly operation is facilitated through the optionally available foot pedal. Feature: electric...

...Joint head with internal or external thread. Housing made of forged C45 alloy steel, spheroidal cast iron GS400, or stainless steel 1.4401 / 1.4404 or 1.4301. Maintenance-required steel/steel bearing. Joint bearing can be re-lubricated, fixed with double-end swaging or retaining rings. Suitable for standard hydraulic cylinders, 160 bar according to ISO 6020/2. Designed for minimal connection distances with maximum stroke utilization or for double-acting hydraulic cylinders. For welding onto piston rod ends or hydraulic cylinder bases.

... pivoting units. The individual core removal operations can be varied and programmed according to the casting part. The core removal time is dependent on the casting part and, for example, takes about 46 seconds for two cylinder heads with double loading. The core removal box is soundproofed (sound emission: < 80dB(A)) and features an automatically closing and opening loading door. Sand disposal...

... handling · stepless height adjustment · large clamping area · Machine start via: - 2-hand operation - foot switch - initiator · Various electrical controls available Application areas: Rolling diameter: ø7 to ø120 mm Rolling materials: steel, stainless steel, aluminum, die-cast (Al-, Zn- or Ms-alloys) Types and sizes of roller heads and rolling units: There are 2 standard sizes. VR2xx with NE2xx (hydraulic feed up to 12 kN max. 80 mm stroke) VR5xx with NE5xx (hydraulic feed up to 40 kN max. 72 mm...

... Either toothed drill chucks or multy spindle heads available Drilling units, motor 1,5 KW, 400 V, 50 Hz, 3000 r.p.m., pneumatic down feed max. 200 mm, hydraulic damped Drilling performance up to Ø 16 mm Zero-stop for X-direction mounted on left side of machine, adjustable 0 – 100 mm Table with pneumatic horizontal profile clamps...

... ceramic, Joint bearings, Joint heads, Hydraulic joint heads, Composite sliding bearings, Sintered sliding bearings, Solid sliding bearings, Graphite sliding bearings, Split housings, SN/SNK, I-12, F-5, Rolling bearing accessories, Retaining rings, Felt rings, Tension sleeves, Grooved nuts, Locking plates...

... compressed air, and the cutting process begins with a hydraulic soft start – for a quicker start of work, the rapid feed can also be utilized. In contrast to conventional... Drive Type: Compressed Air Motor Country of Origin: Germany Machine Weight approx.: 12.1 kg Pipe ID: 19.1 - 47.0 mm Wall Thickness: 1.2 - 3.0 mm...

... system is constantly bled. Air bubbles in the hydraulic fluid might combust spontaneously under certain conditions (so-called Diesel effect). As a consequence, seals and sealing surfaces can be damaged, causing leakages. Clamping heads are especially susceptible for this phenomenon, as they have only a very small hydraulic volume and are not flushed through at each activation. Air can therefore easily accumulate in the clamping head. This is the reason why the usual initial bleeding at commissioning is often not enough, especially when the line leading to the clamping head points upwards...

...Battery hydraulic for interchangeable pressing heads, pressing head rotatable by 180°, manual return after pressing is completed. • for 4 different interchangeable heads (Item No. 216761, Item No. 216762, Item No. 216763, Item No. 216764) • easy head change • lockable with 2 removable pins • with new HAUPA battery Item No. 215523 and charger Item No. 215527 • pressing force kN: 60 • working pressure in bar: 700 The different colors of the sensor LED indicate whether the pressing was successfully completed or if any errors occurred.

... detected. This results in significantly shorter drilling times compared to conventional drilling units. Another special feature is that the oil brake cylinder can drive the full stroke of the drilling unit in both feed and rapid traverse. (In the standard version with adjustable stop, or - for an additional charge - as a rapid feed jump switching.) For the drilling unit, an additional cylinder can also be easily mounted at any time, for example, if the drilling force is insufficient in multi-spindle drilling heads.

... bearings, maintenance-required or low-maintenance • Rod ends, maintenance-required or low-maintenance • Hydraulic rod ends • Adjustable needle bearings • Maintenance-free rod ends with integrated rolling bearing • Metric or imperial • Custom rod ends according to drawing • Angular joint bearings • Axial joint bearings Areas of application: Rod ends are often used in the automotive industry, in special machines, and in model building.

...Hydraulic Crimping Heads...

The company Druseidt is one of the long-established industrial enterprises in Remscheid and was founded as early as 1890. Even before World War II, it had made a name for itself in the field of switchgear and installation technology through its own developments and Reich patents. At that time, well-known products included the various Druseidt switchboard terminals and fuse elements. Today, Paul D...

...We inspect and overhaul your universal milling heads or work spindles in our workshop. - Renewal of the main spindle bearings and bevel gears - Inspection of the hydraulic and cooling circuits - Assembly and compensation ...

...our super light hydraulic crimping head ipr990hP with 100 tons Crimping force at a sensational weight of only 20 kg!!! TECHNICAL DATA Weight: only 20 kg ! With AIR-SPRING-TECHNOLOGY Operating power: 1000 kN Operating pressure: 850 bar Crimping die diameter: 95 mm Crimping die: Indicators to KZ 68 Suitable for Cable types: Al, Cu Dimensions: Ø 148 x 287 mm...

...The sales and delivery of seals and seal kits for all Hunger hydraulic cylinders as well as third-party products are also part of our service offering. Additional spare parts such as pistons, piston rods, joint bearings, joint heads, cylinder tubes, valves, and measuring systems are available or can be manufactured according to our own or customer specifications. It is important for the precise...

... provide an alternative to sensors with metallic connection heads. They are used just like conventional thermometers for measuring storage temperatures and in liquid media. In wind turbines, they monitor hydraulic drives, such as the pitch or azimuth adjustment of rotor blades and nacelles. This thermometer is also used in tractor manufacturing.

... hydraulic expansion and membrane clamping devices. In addition to high precision, the large opening stroke also facilitates the automatic loading of the machine - even if the robot operates with some imprecision. By the way, light contact with the part during loading does not bother the TOPlus premium. It is "robust" despite its high precision, and its process remains stable. The best of all HAINBUCH chucks.

... for example guiding columns for plastic injection moulding machines, tie rods for hydraulic jacks, rollers for paper machines etc. Our product range has increased many times over. Please send us the drawing of your parts. We will give you our opinion and make you an attractive offer.

...DESCRIPTION High stability on high capacity. Can handle multiple ointment viscosity and types Type of metal used S.S 316 / 304 Certifications ISO 90012015, OHSAS 180012007, ISO 500012011, ISO 450012018 SPECIFICATION cooling and heating system Herma Labeling machine 1 heads Simplified control panel vacuum and pressure system viewing ports Hydraulic opening and closing system High technology of...

... - Compatible with all AS Tech series - Adaptation of measuring heads to third-party products is possible - Integration of control software into third-party aggregates is possible - Customization of measuring devices according to customer specifications - Development of the system solution upon request...

... individual machine. Do not hesitate to describe your problem to us and contact us. Together, we will find a way to solve your hydraulic drive problem as well. Development, design, and manufacturing of hydraulic cylinders, stainless steel hydraulic cylinders, piston rods, cylinder tubes, and guide heads for all industries. Industries (excerpt): Industry (general and specialized mechanical...

Our comprehensive, user-oriented service concept ABEG is a breakthrough in the selection and procurement of rolling bearings and all related components: We make the global market transparent not only based on technical criteria but also on economic factors, offering new perspectives for entrepreneurs, designers, and purchasers. #Analysis and evaluation of all rolling bearings available on the glo...