hot water system Germany

... pressure-free circulation ensures high operational safety, low wear, long service intervals, and, last but not least, minimal fuel consumption. A tank system with 5 chambers, including a safety basin, prevents the leakage of operating fluids such as fuel, heating oil, or softener. Category: High Pressure Type: Hot Water Energy: Diesel-powered Configuration: Mobile...

...Low-NOx or CO2-neutral operation possible — Complete system with intelligent control technology and secure remote connection — Proven and durable boiler technology "Made in Germany" Performance: 13,000 to 38,000 kW Safety overpressure: up to 30 bar Max. temperature: up to 225 °C Energy carriers: Gas, Oil, Biogas, Bio-oil, Hydrogen...

...Klöpper Therm electric flow boilers are used for generating hot water in heating units for direct heating, storage operation or for Power to Heat systems. As an alternative to other energy types in new buildings or when converting central heating units, these boilers offer a universal range of applications radiator heating, floor heating, mixed systems or bivalent operation with other energy types. Depending on the relevant operating conditions of the energy supplier, the boilers are used for direct or storage heating by utilising free electric power during off peak times.

...Hot water heaters are designed as radiation heating boilers with downstream convection heating surfaces in a three-pass system. The piping system is surrounded by a steel sheet casing and mineral wool insulation.

...Hot water heating in a storage loading system with pre-regulated heating circuit, a regulated heating circuit, or primary return cooling Manufactured in compact/module design mounted on a vibration-damping and sound-insulating steel frame with piping made of St37.0 P235 TR as well as fittings and connection pieces St37.0, with drinking water side made of bronze/stainless steel, in accordance...

...Screw-in heating elements for water heating with photovoltaics. Suitable for hot water and heating buffer storage with PV systems. Continuously adjustable power output, depending on the available surplus electricity from the PV system. Connection 230/400V 3(N). High-quality industrial quality: tubular heating elements made of Incoloy 825 (2.4858), thread G 1 1/2" and connection housing made of...

... called air heaters or air coolers. Air-water heat exchangers are often also used as exhaust gas heat exchangers or flue gas heat exchangers in order to recover the energy from warm or hot exhaust gases. Lamella packs for a large exchange area In order to achieve the largest possible exchange surface between the air and the medium (liquid) within the heat exchanger, lamellas or lamella packs...

...BPAfree TRITAN water bottle Nonslip SILICONE grip Easy drinking with specially designed lid and mouth structure Protective lid protects the drinking area from dust 100% sealing with silicone plug system and lid lock developed against leaks Ease of drinking with fixable lid Onehanded use No odor Dishwasher safe. Resistant to impacts and breaks thanks to TRITAN material Carrying rope made...

...The PURION PRO multi-lamp system 2500 / 6 is designed for UV disinfection for larger flows of specialty liquids with very low transmission. The control cabinet can be equipped with lifetime monitoring (OTC 2). The potential-free contact D1-D2 (fault summary signal) allows for easy integration into existing monitoring concepts. Special configuration options: Hot water up to 90 °C Lifetime...

...which regrows quickly. • This ensures that the rainforest is used ecologically and not exploited or destroyed. • After the bark is peeled from the trunk, the outer bark parts are separated from the inner valuable bark, which is then stored in a dark and dry room. CONSUMPTION RECOMMENDATION: Boil 1 tablespoon of Lapacho bark tea in ½ liter of water for about 5 minutes and then let it steep for about 15 minutes. A small splash of lemon juice added when pouring helps to better extract the minerals. The bark tea can be consumed in any quantity, hot or cold. Bag: 100g + 1000g...

...The heat exchangers of the WKS series are air/air heat exchangers and are operated in crossflow in systems for controlled supply and exhaust air ventilation for heat recovery. The heat exchangers are optimally suited for volume flows from 1,000 m³/h to 15,000 m³/h, as well as for operating temperatures up to 70°C in the standard version and up to 150°C in the high-temperature version. Due to their compact design, they are excellent for retrofitting, as well as for modular integration into your new system.

...The IRE168DS is clipped onto a DIN rail TS 35. The dimensions of 69x85x62 mm allow for optimal utilization of the control cabinet. The controller is available as a 2-point controller or as a PID controller. Various sensors can be used. The IRE168DS has all the necessary settings for an electric trace heating system with the simplest operation. Additionally, the 2-line display allows for...

...This is a valve that is activated by temperature changes. It automatically drains hot sealing fluid, ensuring cool and reliable operation of the seal.

...INDUSTRIAL DEHUMIDIFIER DH 115 S This standard industrial dehumidifier removes up to 312 liters of moisture daily and is a particularly cost-effective solution for keeping stored goods dry or preventing damage from mold or corrosion in industrial processes. The dehumidifier features an integrated hot gas automatic defrosting system that allows for continuous drying without pauses for defrosting...

... temperature up to 500° C. An optional blow-out system makes the sensors insensitive to contamination of the optics. The detectors are, for example, used to detect steel girders or hot rolled wire as well as for the contactless temperature control of brewer’s barley in germination tanks.

... Alarm Output Visualization on PC Multilingual Software Playback of Stored Thermal Images as 'Video' Automatic Temperature Analysis in Self-Defined Sectors Integrated OPC Server for Remote Control of the System Analog/Digital Output Modules Optical Resolution: Up to 200:1 (90% Energy) Measurement Temperature Range: 20 – 1,200 °C Field of View: 90° Measurement Points Per Line: Up to 1024 Line Frequency: Up to 150 Hz Ambient Temperature: 0 – 50 °C, with Water Cooling up to 180 °C Interfaces: Ethernet TCP/IP (100 Mbit/s), OPC, DDE, Analog/Digital Output, RS485...

...Our high-performance, custom-made insulation systems for engines, exhaust pipes, and turbochargers offer maximum flexibility and can be retrofitted to almost any system to effectively and efficiently insulate hot components and exhaust lines. By using these specialized insulations, the risk of burns can be minimized, radiant heat can be reduced, and energy costs can be saved. By employing...

...ELKALUB GLS 795/N3 is a synthetic high-temperature grease designed for the lubrication of rolling and sliding bearings in a temperature range of -40 °C to +200 °C and at low speeds. The high content of solid lubricants supports all types of sliding operations; the grease is also vibration-damping. ELKALUB GLS 795/N3 is adhesive, water-resistant, and extremely aging-resistant. In hot air streams...

... Pitch: 40 mm RX E-Tube RX48 Inner height hi: 62 mm Inner widths Bi: 120mm Bending radii R: 120 - 325 mm Pitch: 48 mm RX E-Tube RX56 Inner height hi: 73 mm Inner widths Bi: 140mm Bending radii R: 140 - 350 mm Pitch: 56 mm RX E-Tube RX56 High-temperature plastic version of the chip-proof RX energy tubes from stock - 850°C from 24h RX - from stock against hot chips Submersion test in water...

...The Technical Service from Wire Belt provides you with quick, efficient, and reliable access to our expertise and all original parts. Polyetheretherketone, or PEEK, is a high-performance thermoplastic primarily used at high temperatures and generates less wear than metal drive components. PEEK can be continuously used at 240°C, as well as in hot water or steam, without permanent loss of its physical properties. Tensile strength (N/mm²): 100 Heat deflection temperature (ºC): 152 Continuous operating temperature in air (ºC, min-max): -50 - 240 Melting point (ºC): 343...

...All media contacted parts are resistant against acid and demineralised water, media must be compatible with V2A stainless steel, version 1.4301. Mobile. Parts cleaning collector with sturdy drip-off grid, 80 kg load capacity, 30l. Water recycling via special sedimentation system with filter monitoring. 60 l water tank, 5 l cleaning agent reservoir, stepless adjustable pressure, metering device...

...Indirect steam generation with a steam generator. Heating is done using thermal oil. Our hot and warm water systems are supplied either as individual components or as a complete package, including water treatment (softening system), feed water pumps and tanks, as well as control cabinets.

...Economizer Economizer – Flue gas heat exchangers are used to utilize the residual heat from flue gases for heating thermal oil, feed water, and hot water. Depending on the design, the "Eco's" allow for an efficiency increase of the boiler system of approximately 3% to 10%, thus saving valuable fuel. Economizer – can be made from ribbed or smooth pipes depending on the fuel and application case...

... penetration properties Extreme adhesive strength Extreme wear protection through Moₓ-Active additive Very high resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral Also available as spray version OKS 341 For best adhesion, clean the surfaces mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply OKS 340 with a brush, drip oiler...

...The patented TECsteam steam booster nozzle is used for cooling steam close to the saturated steam temperature or hot gases. The temperature is controlled by the injection of water into the steam or hot gas stream whereby the water is thermally atomised using high pressure steam. The high pressure steam is removed from and returned uncontrolled to the high pressure steam system. The temperature-dependent cooling water is supplied via a control valve. Extremely short evaporation sections of less than 3 m can be realised with this valve. Temperature:max. 750 °C...

... polysaccharides from the chitin shell of the mushroom is done using hot water. Compared to the powder, the extract has about a 10-fold concentration of polysaccharides. Our powders are obtained from the gently dried fruiting body of the mushroom through fine grinding. A quality feature is the particle size of < 0.125 mm. All raw materials are tested for 250 parameters and aromatic hydrocarbons. The corresponding laboratory analyses and certificates are provided with each batch. Extract MOQ: 1 kg Powder MOQ: 5 kg Capsules MOQ: 2000 pcs.

...The Power to Heat system by ELMESS allows operators of  CHP systems with connected heat sink to reduce feeding into the grid by using electricity for hot water. - Biogas plants - Wid farms - Municipal energy suppliers...

... digital load cell DigiMASS-2 for high weighing accuracy — Heated versions available (electrical, hot water, thermal oil, etc.) Power range - Different Versions 1 - 1000 dm³/h 50 - 5000 dm³/h 100-10000 dm³/h Pump:1.4571 Hopper:1.4301 Non-contact components:1.4301, Aluminium, plated or painted steel (RAL 7035)...

... computer. The ScanIR3 linescanner and thermal imaging system has one of the fastest scan speeds in the industry and offers complete data about even the highest-speed manufacturing processes. Unlike point sensors that measure a single point, the linescanner measures multiple temperature points across a scan line. Its motorized mirror scans at rates up to 150 lines per second, allowing rapid detection of...

... location Only a 220V power outlet needed nearby Meets the highest hygiene standards Semi-annual maintenance by our staff We also offer gallon-based devices with hot water function or sparkling water. Contact us! We look forward to your inquiry!