Results for

Hot water system - Germany

27 Companies

84 Products

Product recommendations

Turkey

Turkey

Turkey

Turkey

See more products

FIEDLER MASCHINENBAU UND TECHNIKVERTRIEB GMBH

Germany

FIEDLER Maschinenbau und Technikvertrieb GmbH offers you a complete range of attachments and bodies for public transport vehicles and tractors in the municipal, environmental and winter road maintenance sectors. Made in GERMANY – from development, testing and production through to attachment, set-up and shipping, our employees ensure fully satisfied customers.

Website
OFS ONLINE FLUID SENSORIC GMBH

Germany

OFS Online Fluid Sensoric GmbH is a medium-sized company with decades of experience in the field of industrial water treatment. Our aim is to handle water through an environmentally-friendly approach. Our products include analysis, monitoring and control systems for process water and in particular water softeners, reverse osmosis systems, boilers and hot water systems. Our requirements in terms of operating and process safety, efficiency and environmental performance set new standards. As a company that develops and manufactures products, we control all aspects of the process and can provide customer-specific comprehensive solutions. We provide the μdox hand-held measuring device used for water analysis. We also sell stationary monitoring and control units for parameters such as water hardness, pH and oxygen in industrial waters. The “Softcontrol” product range analyses and monitors water hardness, thereby protecting reverse osmosis systems and boilers again excessively hard water.

See all products
MAGONTEC GMBH

Germany

MAGONTEC Limited is the leading supplier of magnesium alloys and products for cathodic corrosion protection as well as corrosion protection systems for hot water storage tanks. Our distribution network extends to Asia, America and Europe. For more than 60 years, we have been a direct supplier to the worldwide automotive and domestic appliance industry. The Magontec Group, which emerged from the former Norsk Hydro Magnesium company, has developed into the largest independent manufacturer of magnesium alloys in the West today. Primarily, we concern ourselves with two key areas: Magnesium pressure die-casting and processing in the automotive industry, and cathodic corrosion protection in the hot water storage industry. The company is listed on the Australian stock exchange.
PFEFFER FILTERTECHNIK, INH. ULRICH PFEFFER

Germany

Founded in June 1988, this company, directed by Ulrich Pfeffer since its establishment, specialises in water treatment. Initially working in the agricultural sector and in aquaculture, the company has also been increasingly active in the industrial sector since 1999. On the basis of customer-specific solutions, always preceded by a detailed application and problem analysis, we develop individual, customer-specific and cost-efficient solutions. Our most important goal is to optimally meet the needs and requirements of our consumers. Network – 25 years in the market of individual solutions both require and result in expertise and a comprehensive overview. If we are not able to provide a solution ourselves, we can usually fulfil the requirements of our customers in collaboration with our network of long-standing international partners from the fields of economics and research into the extensive domain of water technology!

Website
BOSCH INDUSTRIEKESSEL GMBH - INDUSTRIAL BOILERS

Germany

Bosch Industriekessel GmbH, a company of the Bosch Home Comfort Group, , has been developing and manufacturing project-specific heating and process heat systems for more than 150 years. In keeping with its “Invented for life” principle, Bosch Industriekessel creates future-proof energy systems. The steam and hot water boilers increase the energy efficiency in production, buildings and district heating grids – by means of sustainable energy use and the seamless integration of Industry 4.0 applications. CO2-neutral heating and process heat solutions with hydrogen and electrification help pave the way to carbon-neutral heating. Around the world, Bosch Industriekessel customers are offered a universal product portfolio, as well as planning support, project management and after-sales services such as maintenance and 24/7 support – all from one source.

All the products for "hot water system"

Bosch Boiler control BCO

Bosch Hot water boiler - Unimat UT-HZ

Bosch Hot water boiler - Unimat UT-M series

Bosch Hot water boiler - Unimat UT-H

Bosch Waste heat boilers

Website See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

SANHA GMBH & CO. KG

Germany

The SANHA group is one of the leading European manufacturers of pipe systems for drinking water, gas, solar, heating, cooling and sanitary applications for use in domestic and industrial settings. We have approximately 8500 items in our product ranges, covering most commonly used materials such as Copper, Copper Alloys, Stainless and Carbon steel, as well as our innovative Silicon Bronze, lead free fittings, for use in Drinking Water applications. As a family owned and operated business, SANHA has over 50 years of experience, employs over 650 staff and turns over app. 100 million Euro. SANHA’s principal focus is on system technology. We believe in supporting local markets with relevant certification. As an innovator in press technology, we have invested significantly in developing lead-free Silicon Bronze products, for safe drinking water applications. Our manufacturing plants specialise in tube and fitting production, with our Stainless Tube plant in Berlin and Stainless Steel fitting plant near Dresden, along with our Head office and central distribution depot in Essen, we are able to serve our customers well throughout Europe. With over seventy percent of our products being manufactured internally, we have a strong control over quality and our supply chain, ensuring the end product meets the stringent requirements of our customers.

All the products for "hot water system"

SANHA®-Heat Connection set, vertical, for heat meter

SANHA®-Heat

SANHA heating circuit distributors, stainless steel

SANHA®-Heat

SANHA®-Heat Ball valves

See all products
KRONSEDER TROCKENTECHNIK GMBH & CO. KG

Germany

Manufacture of vacuum dryers, fresh/exhaust air ventilation dryers, dryer control systems and digital wood humidity measuring equipment. Kronseder Trockentechnik has been manufacturing vacuum dryers for wood measuring between 1 m³ and 70 m³ and wood drying systems for firewood and wood chips for 30 years. Our vacuum dryers are fitted with heat pumps and buffer tanks, hot water heating coils or direct electric heating. Our products include combined steam drying systems for wood, wood moisture measuring equipment, fumigating systems, drying systems for wood, dryers for granules, dryers for extrudate, dryers for pellets, dryers for bulk goods, drying systems, biomass drying systems, wood chip drying systems, vacuum systems for fumigating oak with ammonia, vacuum drying systems, vacuum drying systems for wood, hot chambers and many more.

All the products for "hot water system"

Vacuum dryer

See all products
DUO-TECHNIK GMBH

Germany

Duo-Technik GmbH has now existed for more than 25 years. Over this time, the company has developed from a distribution enterprise into a systems supplier for all matters regarding flexo and digital printing. Since Duo-Technik was founded in 1989 as a sales organisation, it has transformed into a manufacturing company that now offers a wide range of auxiliary equipment for the printing industry. The increasing requirements of our customers continue to drive the development of our business. Today, our product range includes: Infrared and hot air dryers for water-based inks and varnishes, dust extraction systems for sheet and web-fed printing systems, polymerisation facilities for UV inks and varnishes, conditioning of inks, washing systems for printing plates and anilox rolls, transport for sheets

Website
MICONTEC GMBH

Germany

Micontec GmbH is an innovative and flexible company in the field of conveying technology and industrial plants. Our team continuously develops innovative products to meet the high requirements of our customers in Germany, Europe and worldwide. Micontec GmbH's customs include large European energy suppliers and plant builders as well as well-known disposal companies and foundries. We offer planning, design, engineering, manufacture, delivery, assembly, commissioning and servicing of conveying technology and industrial plants for transportation and the cooling of ash, slag, hot materials and bulk material: Slat deslaggers / slat ash removal systems, wet deslaggers / wet ash removal systems / scraper conveyors, dry ash removal systems / dry deslaggers, slat conveyors, trough chain conveyors, hot material conveyors, cast coolers, deflection stations / underwater rollers, hydraulic tensioning stations, pressure water stations.

Website
BBS GMBH

Germany

BBS GmbH, based in Freiberg am Neckar, Germany, has over 75 years of experience in the field of industrial heating technology, thermal post-combustion and boiler design. BBS GmbH was established in 2004 through the merger between BAY Wärmetechnik GmbH and Bay Engineering und Consulting. The new company united the production of industrial boiler systems with the expertise required for engineering modern energy systems and environmental technology. In addition to manufacturing serial products, we also develop and manufacture boilers and apparatus for special applications employed in the cosmetics, chemical and petrochemical industries. Our scope of operation includes steam boilers, hot water boilers and thermal oil boilers. Pure steam generators and waste heat steam boilers for a wide range of applications are also part of our product portfolio.

Website

INTEC ENGINEERING GMBH

Germany

INTEC Engineering GmbH is an international company recognized for excellence in the design, manufacturing and delivery of energy systems. INTEC plants represent state-of-the-art technology. INTEC energy plants universally use thermal oil as the heat transfer medium. Thermal oil boasts significant advantages compared to steam or hot water, particularly that it can be heated at atmospheric pressure up to temperatures of over 300°C with mineral oils, or 400°C with synthetic oils. Thermal oil is consequently the predominant medium used in the supply of process energy for a majority of industrial processes. INTEC energy plants supply process heat for various industries. Core components like coils, waste heat boilers, secondary control loops etc. are manufactured and assembled through our subsidiary INTEC Rohrtechnik GmbH in Bruchsal, Germany which guarantees fast and flexible solutions to customer needs. INTEC possesses the experience and the technologies for the innovative thermal treatment, disposal and economic use of biogenic, contaminated sludges and residues. The innovative disposal and utilisation concept is based on a combination of the contact drying technology with INTEC solid fuel firing plants and process heat generation plants. The contact dryer is a leading technology for drying, hygienising and increasing the calorific value of domestic and industrial sewage sludges. The contact drying therefore complements the INTEC solid fuel firing methods.
FOTHERMO SYSTEM AG

Germany

The fothermo System AG was founded in 2020, with the goal to enable a self-sufficient hot water supply for everyone through our products. Thanks to the inexpensive photovoltaic modules, hot water can be generated anywhere in the world. Even in the most remote places on this planet. The photovoltaic boiler does not require a connection to the power grid to operate. This is how you can easily make yourself independent. Energy from the power of the sun. 100% renewable and sustainable. With the photovoltaic boiler, you can not only generate hot water, but also become an active climate protector and save hundreds of kilograms of CO2. For this reason, our fothermo PV boiler was developed, which uses the direct current of PV modules without inverter to heat the water. We offer a cheaper alternative to solar thermal systems and are proud to be the first company to bring this innovative idea to the market.

Product recommendations

Turkey

Turkey

Turkey

Turkey

See more products

ENVICON GMBH

Germany

For more than 35 years, ENVICON has been manufacturing different types of efficient and durable aerators with various diaphragm materials for biological waste water purification and drinking water treatment in Germany. With our dedicated and experienced team, we advise customers all over the world in matters relating to material selection, arrangement of the aerators in treatment tanks and operation for their specific waste water situation. In collaboration with a university, we also offer flow simulations for optimising the arrangement of the aerators and for preventing short circuit currents. Our products are sophisticated, efficient and durable. We retain tried-and-tested products and processes while continually extensively developing new ones at the same time with our partners, and we adapt our products to new requirements for environmental protection and cost-effectiveness.

Website
OVIVO DEUTSCHLAND GMBH

Germany

Ovivo is a global company with offices in 15 countries and five continents and is solely dedicated to treating water and waste water. As real water specialists, we understand the complexity of water and the day-to-day reality for our customers. We are driven not only by the global aspects of tried-and-tested practices, we are also proud to challenge standards! Our well-established technologies, unmatched experience and corporate culture enable us to realise first-rate projects all over the world. We are specialists in planning, constructing and maintaining the following facilities: Ion exchanger plants, complete desalination plants, turnkey plants, waste water treatments and decontamination. We also specialise in water management, water recycling, recovering resources, servicing and maintaining waste water treatment plants (WTTP), and, in particular, eliminating heavy metals.

Website
FLUIDTEC FLÜSSIGKEITSTECHNOLOGIE JAN PETER KIEL

Germany

FLUIDTEC offers various technologies for water treatment and pump technology. FLUIDTEC has made it its business to design technical solutions for water treatment and water pumping for its customers ecologically and economically. Sustainability as well as the quality of our products and services are everyday requirements that the customer strives for when considering the environment and economy. Our product range consists of: Complete technical systems for processing water and other liquids. System components for water and liquid treatment. Consumables for water and/or liquid treatment.

Website
BURRE HYDRAULIK GMBH

Germany

Founded in 1964 by Karl-Heinz Burre (Dipl.-Ing.), Burre Hydraulik began operations in 1965. The original idea of an engineering office was quickly rejected and its own small manufacturing facilities began. The first developments comprised control valves for hydraulic excavators, explosion-protected solenoid valves and diaphragm valves. In 1972, the company moved into the newly constructed production hall on the site on which Burre Hydraulik's headquarters still stand today. A 540 m² production area allowed more space for putting the founder's innovative ideas into practice. Burre Hydraulik thus designed and produced items including explosion-proof solenoid valves for the refuelling systems of diesel locomotives belonging to Deutsche Bahn. But Karl-Heinz Burre realised quickly that the future lay in hydraulic control systems and equipment, and he orientated the company accordingly. He accepted the challenge here and often entered uncharted technical territory. He therefore had a significant influence on the automation of machinery for the textile industry. But he was also successful in other technical areas. For example, he developed an automatic scuttle for seagoing vessels. The production area also grew consistently in line with this development, and is now over 5000 m².

All the products for "hot water system"

Bridge Technology

Ro-Ro Landing Systems

Pipeline

Watergate Technology

Website See all products
FLOTTWEG SE

Germany

Flottweg is one of the worldwide leading solution providers in the field of mechanical separation technology. Our decanters, disc stack centrifuges and belt presses exclusively manufactured in Germany are the preconditions for high efficiency in production and outstanding quality of our customers’ end products. In the petrochemical, chemical, pharmazeutical and the food industry but also in the field of mining as well as in the environmental area for the treatment of waste water or oil sludges – Flottweg’s premium products and systems work successfully everywhere. Thousands of satisfied customers all around the world are our best reference. For more than 60 years Flottweg have been developing and producing decanter centrifuges, separators, belt presses, and systems considered extremely powerful and reliable. In many industrial areas, they handle key functions in the clarification of liquids, separation of liquid mixtures, and concentrating and dewatering.

All the products for "hot water system"

Flottweg C series

OSE Decanter

Website See all products
BUSS-SMS-CANZLER GMBH

Germany

We are in the top spot when it comes to thin-film evaporation technology and are an internationally leading company for drying and high viscosity technology. We develop and construct machinery and systems for evaporation, drying and the processing of highly viscous materials, which exactly match your requirements: Exceedingly precise, efficient and highly innovative when you need it.

All the products for "hot water system"

Sewage sludge dryer, Sewage sludge drying

Horizontal Thin Film Dryer

Website See all products
HUGO FROSCH GMBH DESIGNPRODUKTE AUS KUNSTSTOFF

Germany

Welcome to Hugo Frosch GmbH plastic design products. Thank you for your interest in our products. We will be happy to answer your questions. Contact us now! Our products include: Hot water bottles, organic products, hot water bottles for children, fabric toy animals and plush toy animals.
SOLARSPRING GMBH MEMBRANE SOLUTIONS

Germany

When traditional water treatment methods reach their limits or process fluid disposal becomes uneconomical, we put to use our membrane distillation technology. Through the use of waste heat or renewable energies, we can improve the CO2 balance of your company. We offer complete solutions for industrial waste water treatment. Our products are used in the metallurgical industry in the field of printed circuit technology, or in research. For drinking water treatment, we use our solar-powered MBS systems, which produce crystal-clear water through up to five treatment stages. Since 2009, SolarSpring GmbH, membrane solutions, has become a world-leading membrane distillation specialist. We don't just believe in the importance of water; we work together with regional suppliers and are committed to a purposeful company structure.

All the products for "hot water system"

MBS-Standard

MBS-Outdoor

MBS-Wall-Mounted

See all products

AQUA-TECHNIK BEREGNUNGSANLAGEN GMBH & CO. KG

Germany

The company AQUA-TECHNIK BEREGNUNGSANLAGEN GMBH & CO. KG, is a Retailer, which operates in the Irrigation and sprinkling systems industry. It also operates in the irrigation, watering systems, park watering systems, and spray irrigation industries. It is based in Neuenkirchen, Germany.
WATERJET PRODUCTION ACADEMY GMBH

Germany

The Waterjet Production Academy GmbH is a service provider that has specialised in water jets for 20 years. We offer tailored advice, customized training courses and innovative products. We can guide you through the development of new processes relevant to you and advise on how to optimise your production processes. We find the perfect solutions to reduce your costs and improve sustainability. Find out more about our consultation services. We can come to you or you can visit us in our cutting-edge training rooms and learn all about software operation, machine operation, high-pressure maintenance, wear parts cost management and product sales. Find out about our training programme and what we have to offer in terms of innovative and targeted products. In order to guarantee the very best quality, we work exclusively with highly specialised hardware and software producers from the water jet industry.
ENMETEC GMBH

Germany

Welcome to Enmetec GmbH, a world-class company in the water filtering area. First of all, I would like to extend my deepest thanks to all our customers who have been supporting us for over 10 years. I would also like to sincerely thank the new visitors to our website for their interest in our company. At Enmetec, we believe that the focusing primarily on the customer is the key to success. We respond to our customers' needs and impress them with our technological achievements. We offer our customers better and smarter high-quality solutions and act in a forward-looking manner in order to satisfy both current and future needs. With our products and services, we guarantee our customers – both private households and companies – clean and healthy water. We are proud of what we have achieved so far and are excited about what the future will bring.
KAMAT GMBH & CO. KG

Germany

Efficient high-pressure technology for the very highest demands – KAMAT is your expert for industrial high-pressure applications. Achieve maximum efficiency and quality in your industrial applications with KAMAT high-pressure technology. Our outstanding Triplex and Quintuplex high-pressure pumps, power units, complex pump systems and high-quality high-pressure accessories are the ideal solution for your jetting, hydraulic and process engineering requirements. Since 1974, KAMAT has stood for experience and expertise in the production of high-pressure technology – Made in Germany. We provide you with tailor-made solutions that can be adjusted to meet your individual needs. As a medium-sized, second-generation family company, we are proud to develop and produce tailor-made high-pressure solutions for the international market. Overcome your industrial challenges with our high-pressure technology at your side. Discover the impressive performance of KAMAT today and let us help you achieve your goals.

All the products for "hot water system"

High- and Ultra-High-Pressure Water Systems

Electric High-Pressure Unit

Diesel High-Pressure Units

See all products
OSMO MEMBRANE SYSTEMS GMBH

Germany

OSMO develops and produces high-quality industrial membrane separating systems for a wide range of process applications and water treatment. Our focus is on individual customer solutions: Special systems for the chemical industry, microfiltration, ultrafiltration, nanofiltration, reverse osmosis, electrodialysis. High-pressure reverse osmosis systems for maximum concentration of salt solutions and organic solutions, e.g. before further thermal treatment (evaporation). Innovative water treatment for producing boiler feed water.

See all products
GROSS WASSERTECHNIK GMBH

Germany

The company GROSS WASSERTECHNIK GMBH, is a Manufacturer/ Producer, which operates in the Water desalination equipment industry. It also operates in the ion exchange systems for water treatment, ion exchange resins, and assistance for water purification systems industries. It is based in Keltern, Germany.
ILUDEST DESTILLATIONSANLAGEN GMBH

Germany

We have specialised in the fascinating area of distillation. Due to our systems' multitude of applications and the high qualification level of our employees, we are familiar with almost all problems which can be resolved by distillation. Be it for the experimental stage in the laboratory, the pilot stage in the technical centre or on an industrial process scale – ILUDEST® supplies systems perfectly tailored to the given application, and for throughput rates ranging from a few ml to 100 l/h. Simple operation with PC and modern measuring and controlling electronics make us leaders in the design, development and manufacture of distillation systems. Every ILUDEST/i-Fischer system is a unique high-end product that is precisely coordinated to the specific concepts of our customers and turns challenges into solutions. 100 ml per day or 100 litres per hour, solvents or acids, scents or crude oil, at 350 °C or 10-3 mbar … We have been established on the global market as an expert in thermal process technology since 1990. Our systems are used in research, development and production in the chemical, pharmaceutical and food industries, as well as in biochemistry. Further areas of use are teaching, and training in vocational schools, colleges and universities. Whatever your process conditions are like, we offer the right solution all over the world, with the highest German standard of quality and reliability.

All the products for "hot water system"

i-Fischer® DIST D-1160 CC

i-Fischer® DIST D-2892 MC

FISCHER® LABODEST® VLE 602/50

Distillation Control System ILUDEST® [DC / MoS]²

i-Fischer® DIST D-2892 CC

See all products

Find quotes for

Filters

Results for

Hot water system - Germany

Number of results

27 Companies