chemical pumps Germany

...We offer you, among other things, pumps with single- or double-acting mechanical seals. The chemical pumps type N1/N2 with mechanical seal (GLRD) complete the product range of GEKO-Pumpen GmbH.

Since its founding in 1954 by Karl Lutz and the establishment of nearly ideal production facilities in Wertheim, it has been possible in recent years to develop this brand into a synonym for complete systems related to the filling and packaging of liquids. Today, the Lutz corporate group includes powerful medium-sized companies from various industries with locations both domestically and internat...

...The HiScroll series consists of three oil-free and hermetically sealed scroll pumps with a nominal suction capacity of 6 – 20 m³/h. The pumps are particularly distinguished by their high performance when evacuating against atmospheric pressure. Their very compact design, as well as their extremely quiet and low-vibration operation, further set these pumps apart. Therefore, they are ideally suited for use in quiet working environments, such as in mass spectrometers, research institutes, or leak detection systems.

... obtain a pumping solution for your entire distillation process with just one pump. More than 600 pumps of this type are reliably operating across a wide range of cannabis applications for many of our US customers. This robust and reliable pump series is used worldwide in demanding processes within the chemical and pharmaceutical industries. Actuation: with electric motor Self-priming: yes Technology: external gear Application area: for the chemical and pharmaceutical industry Other features: for pharmaceutical applications...

... PERIPRO® hose pump, you can efficiently transport and dose corrosive chemicals such as hydrochloric acid, sulfuric acid, or iron chloride under strict safety regulations. The dosing accuracy of the hose pumps is less than one percent deviation, making them particularly precise.

... this field, but the most common one is the two-rotor pump. Leistritz screw pumps are used to pump clean or slightly abrasive, low and high viscosity fluids with lubricity from poor to good, such as: additives, bitumen, resins, crude oil, greases, benzenes, adhesives, silicates, isocyanates, tar, polyols, asphalt, paints/varnishes, paraffin, polymers, and various other chemical products.

... variety of types including centrifugal pumps, centrifugal pumps, metering pumps, screw pumps and more. These pumps are suitable for a wide range of applications, be it in the chemical industry, mining, food processing, water treatment or other industries. High-quality construction and materials: Our industrial pumps are made from robust materials and manufactured to the highest quality standards. They feature a durable construction that ensures reliable performance even under demanding operating conditions.

...Replacement injectors for jet pumps in the chemical industry...

...With operating pressures of up to 1,000 bar, the Yseries pumps are ideally suited to a wide variety of cleaning work, e.g. in the chemical industry, oil and gas industries as well as in the area of ship cleaning. Due to the small size and low weight, they can be easily installed in unit with very small base frames. Medium:Water Operation:Without engine...

...Drum emptying pump with rigid discharge elbow and PTFE tap. Thanks to the high chemical resistance of PTFE and FEP materials in contact with the medium, it is also possible to transfer caustic liquids that attack conventional materials like PP or PVC (except for elemental fluorine). Also suitable for transferring high-purity liquids. The tap prevents any leakage of toxic vapors and any dripping of liquid after the transfer. Immersion depth: 40 cm, 60 cm, or 95 cm Flow rate: 180 ml/press, 270 ml/press, or 400 ml/press...

... F 570 eccentric screw pump in 1000 or 1200 mm, collector motor F 458-1, chemical and food-grade hose, discharge elbow, joint clamp with seal, and barrel screw connection PP. Flow rate: max. 30 l/min Lifting height: max. 50 mWs Viscosity: min. 1 mPas - max. 25000 mPas Outer pipe diameter: 53 mm Immersion depth: 1,000 mm, 1,200 mm Material outer pipe: stainless steel Container: 1000 liter IBC, 200 liter barrels...

...To avoid chemical reactions such as curing or crystallization during the dosing process, any contact with metal in the material-contact area of the dispenser has been eliminated. The materials used have been carefully selected: on one hand, with regard to chemical resistance to adhesives and other fluids, and on the other hand, for maximum resistance to physical wear from abrasive media. Highly...

...Displacement pump hermetically sealed, without mechanical seal. Dry self-priming even in ATEX areas. Ring piston pumps without mechanical seal. ATEX certification, capable of dry running even in EX areas. Self-priming, CIP-capable, can draw from vacuum or pump into vacuum. Product recovery. Hermetically sealed: without mechanical seal dry self-priming: less product loss...

...Air-operated diaphragm pumps made of plastic, stainless steel, aluminum, for oil, water, chemicals, FDA, ATEX for various applications. Air-operated diaphragm pumps for the food industry Air-operated diaphragm pumps for the chemical industry Air-operated diaphragm pumps for plant engineering Air-operated diaphragm pumps in stainless steel Air-operated diaphragm pumps in PVDF Air-operated...

...Stainless steel pumps for the food industry, chemical industry...

...tanks, pumps, etc. The heating conductor is spirally wound around the supply lines and alternately contacted at a distance of 1m. Therefore, at the end of the heating cable, care should be taken to assemble immediately behind the last contact point to avoid having an unheated section. However, at the beginning of the heating cable, an unheated section can be useful as a cold end.

...Plastic submersible pumps from the KTF and KTB series are suitable for a wide range of water transfer issues. Furthermore, these pumps can handle a variety of chemical liquids. The pumps operate without seals. Impellers: semi-open Media: industrial water; warm, cold, with and without chemical additives, distilled, deionized Flow rate: up to 400 l/min Head: up to 42 m Medium: Industrial water Actuation: electric Start: submersible Technology: centrifugal Application area: for the beverage industry, for the printing industry Other features: compact, multi-stage, for cooling systems, plastic...

... milestone is set as a forward-looking, efficient, and reliable pumping system. It withstands everything. Chemical Standard Pump made of Plastic Extreme Durability Maximum Safety Long-lasting and Robust Significantly Improved Service Life...

...The Lagoa series is designed for the dosing of various products in the chemical, environmental, food, and pharmaceutical industries.

...Piping of pumps in the chemical industry. The pipe material used is PE100 butt-welded in dimensions DN65 (D75) to DN200 (D225).

...Features: - capacities up to 6000 GPM - heads up to 700' TDH - External impeller adjustment - Renewable shaft sleeve - Heavy duty shaft and bearings - Available in stainless steel - Cast iron bases available Applications: - Paint systems - Filtration systems - Paper pulp - Municipal systems - E-coat systems - Wastewater - Oils - Chemical processes...

...The standard pump made of stainless steel 316 in monoblock design pumps water in a temperature range up to +120°C. The Lowara e-SH standard pump transports water, even with slight chemical contamination, in a temperature range from -30°C to +120°C. The corrosion-resistant design ensures long service life in industrial processes.

...into canisters. The liquids are fed from storage tanks by gravity or pumps. ■ calibratable filling, both above and below level ■ quick cleaning of the valves (the area in contact with the product consists of 3 parts) ■ Quick changeover to other container dimensions and changing products ■ Simple operation by one person ■ Can be used immediately: just connect the power supply (electricity and/or compressed air) and product supply and filling can begin...

... life - Wear- and corrosion-resistant materials - Low pulsation delivery, low shear stress - Rotary micro annular gear technology Applications - Chemical processing - Industrial and plant engineering - Packaging - Dispensing... Flow rate: 0.048 - 28.8 ml/min Smallest dosage volume: 30µl Displacement volume: 48µl Differential pressure range: 0 - 0 - 5 bar (73 psi), max. 40 bar * (max. 580 psi...

... applied in the chemical and pharmaceutical industries as well as for conveying granulates in plastics processing and the food industry. The pneumatic conveyance process is carried out by suction and compressed air, i.e. by vacuum or positive pressure, and is mainly used when sensitive substances are transported. Heavy substances such as cement, sand or gravel are mainly transported by positive pressure.

... wound gaskets of billi are characterized by a constant elasticity during hot-cold cycles. Classical applications in the chemical industry include all types of gas lines, directional valves and pumps. Furthermore, spiral wound gaskets are the optimal solutions for pressure vessel openings in steam systems as well as low and high pressure in nuclear power plants. For the best possible functionality of spiral wound gaskets, the careful considered choice of model is of central importance: the versions with centering ring, for example, assures an ideal fit between the bolts.

...For use in peristaltic pumps to transport aggressive media, abrasive materials, highly viscous liquids and foodstuffs in practically all industrial fields. Construction: Tube in light or dark special qualities for abrasive media, liquids to max. 80°C (NR) for drinking water (IIR) for oils, petrol, fuels to max. 80°C (NBR) for aggressive media to max. 120°C (CSM) for chemical media (EPDM) FDA...

... water supply for laboratories. All Unichillers are designed for continual operation at ambient temperatures up to +40°C. Installation in an outside areas is possible with optional weather protection and winter operation packages. Pumps are available with an extended pressure and flow rate for applications with a high pressure drops. The new OLÉ controller combines state-of-the-art technology with...

...Piston metering pumps with positive displacement for dosing chemical products with high yield and accuracy. The piston metering pumps are made from materials that are compatible with most processes where a product needs to be dosed into a hydraulic network or storage, such as in the food, textile, and chemical industries, as well as in water treatment, agriculture, etc.

...Verderair Pure compressed air diaphragm pumps - self-priming industrial pumps for pumping chemical and abrasive liquids in the industry.