electrical tests Germany

...In addition to the usual ICT/FCT procedures, we can also specifically verify each individual manufacturing step depending on the requirements. Efficient testing strategies and final functional tests are an integral part of our quality management. In our testing laboratory, we can conduct automated, static, and cyclic environmental simulations for you, ranging from temperature shock air and temperature shock liquid tests to storage temperature tests and humidity tests. Based on the future operating environment, we compile a suitable qualification program for each product.

...The system is a self-sufficient unit and is made of a solid welded frame, contains media preparation, a hydraulic unit, and electrical engineering. The pressure test bench has a secure test chamber for burst pressure and hydrostatic pressure tests and, optionally, a climatic chamber for pressure tests with environmental simulation. Depending on the option selected, pressure change tests up to...

...In our cable assembly, we manufacture round and flat cables according to a wide range of specifications. The spectrum covered ranges from prototype production to small series and medium series. Several crimping machines, as well as a flexible cable machine with a hot stamping printing station, are available. Continuity and short-circuit tests of individual cables and cable harnesses with our testing devices ensure a 100% verification of functionality.

... response time of the thermocouple is desired Not protected against furnace atmospheres or electrical interference Type N, 2mm ⌀ mineral-insulated for uniformity tests (TUS) according to AMS 2750D Calibration according to AMS 2750 and CQI-9 Less susceptible to oxidation, may be reused multiple times Type K, fiberglass-insulated high-temperature probes for windshield production Used with mounting kit...

... special segment design allows for precise cutouts for electrical connections and sensor inputs. High quality and durability are ensured by the exclusive use of tested materials. The REX insulation jackets have been tested by a neutral institute, the Plastics Center in Leipzig, for their functionality regarding heating energy savings. In tests with injection molding machines, heating energy savings of up to 50% were determined, depending on the polymer.

... resolution of 0.1 sec Remote control with push button reset for in-chamber event timing. Electrical gas shut-off solenoid Gas control system Flame confirmation kit (ASTM D5207) Black interior finish Performs all UL 94 tests (Except Section 10.0 Radiant Panel Test) Bench top chamber (Volume greater than 0.75 m 3) Tirril Burner Multi-directional specimen and burner positioning apparatus Quick release...

... be cold bent and shaped - Resistant to gasoline, oils, and fats (aromatic-free) - Permanent low-temperature range down to -40 °C - Good electrical insulation properties - Upper permanent temperature range up to 115 °C - Can be cut with a jigsaw/circular saw; trimming with a guillotine is possible Technical Information: - Colors: red-orange, red-brown, euro-green, and dark green - Weight: 9.7 kg/sheet - Protection levels: between 4 - 9 Tests SINO ISO 25980: - Shielding: Welding protection, test number: 12021-PZA-05 2008-01-31 - Shielding: Laser workstation, test number: 10751-ECS-08...

...We conduct the necessary electrical safety tests for you, as a basis for your CE marking and other conformity assessments.

...From the individual winding to the finished machine, these controls ensure our high quality standard • electrical tests AC/DC • mechanical tests • machine tests • sheet metal package tests • special tests • TE measurement • tanδ measurement...

... account during the wiring of the control cabinets. All control cabinets undergo safety and functionality tests before delivery. These tests are documented. As a customer, you can be assured that the components can be deployed immediately. This is an important factor when facing tight deadlines!

... services include the complete organization and production of assembly kits or finished assemblies – assembled and tested. A team of qualified professionals meets every requirement. For a decade, we have been a recognized manufacturer of system assemblies in the fields of mechanics, pneumatics, hydraulics, and electrical engineering. Our flexible approach to your requirements allows for the customization of standardized testing processes, such as functional tests on test benches. Benefit from a powerful partnership.

...For radio systems, the effective and efficient use of the radio spectrum must be ensured. The VDE Institute conducts EMC and radio tests according to various guidelines (including RED).

...for conducting brake tests according to DB Ril 915 on freight trains and/or passenger trains.

...We assess electrical safety, for example according to the standards EN 60335 and EN 60745, as well as mechanical and functional safety according to national and international standards. We examine your devices, machines, medical products, toys, energy storage systems, and much more for compliance with safety requirements. Our laboratory is DAkkS accredited and recognized by IECEE in the CB-Scheme for scopes including BATT, HOUS, LITE, MED, MISC, MEAS, OFF, TRON, SAFE, and TOOL. We also have the authority from ZLS to conduct GS tests according to ProdSG and to issue GS approval certificates.

... systems with corresponding image processing - Part recognition, positioning, color and surface examination, checking for damages - Optical / tactile / ultrasonic tests using sensors and displacement measurement systems - Leakage and pressure tests - Inspection and monitoring of filling level - Run-out properties and accuracy - Backlash measurement - Electrical tests and measurements - Electrical values, check measurements, switching and opening properties Used in all branches: e.g. pharmaceuticals industry, medical engineering, cosmetics, electronics and automotive industries.

...The BT110-4 bending tester is designed to perform dynamic bending stress tests with ID-1 cards, particularly smart cards. This dedicated test system enables to bend the cards along the short axis or the long axis. In each direction 5 cards can be processed simultaneously. The purpose of this test is to determine any adverse mechanical or electrical effects arising from repeated application of...

...We conduct general visual and final inspections, as well as electrical tests, complete functional tests, and burn-in and temperature cycles in the climate chamber on the manufactured assemblies. Upon request, we provide documentation of all measurement data according to current standards.

...BETA Elektrotechnik offers professional testing for transformers to ensure their safe operation and optimal performance. Our tests include electrical tests, insulation measurements, and comprehensive functional tests to detect and prevent potential failures early on. Regular testing is essential for the safety and efficiency of your transformers, especially in safety-critical applications. Benefits: - Comprehensive safety tests - Prevention of failures - Assurance of performance - Regular electrical tests - Extension of lifespan...

... replaced with E27/E26 if needed. Number of LEDs used: 52 Luminous intensity in lm: 980±30 Color rendering CRI: >80 Color temperature: 2800-3200K (warm white), 4000-4500K (neutral white), 5500-6500K (cold white) Connection voltage: AC100~240V 50~60Hz electrical power in watts: 11 Power supply module: internal Socket/Connection: G24 Dimensions: L156mm × W24mm Beam angle: 180° Warranty: 2 years Notes: All G24 sockets can be replaced with E27/E26 if needed.

... commissioned by customers are conducted. This laboratory operates completely independently of the company's other business activities. Our customers are found in the automotive industry and among its suppliers, the electrical and electronics industry, heating systems and thermal technology sector, mechanical engineering, environmental and process engineering, as well as other industries.

... the collaboration of qualified specialist companies (piping construction/electrical/automation/cold storage construction), we can optimally and timely implement large projects and special systems. A continuously growing number of service stations helps us act flexibly and efficiently, as well as respond quickly in emergencies. Our technicians and masters are trained according to the latest guidelines, certified, and equipped with the most modern equipment to detect and rectify faults. OUR COMPETENCE YOUR GAIN...

CE-LAB GmbH is a modern service company for developers and manufacturers of electrical and electronic devices. The core of the business activity is the execution of measurements and tests as well as calibration to determine conformity according to the applicable standards or device specifications. The core of the business activity is the execution of measurements and tests as well as calibration...

... and distributors in the standard display sector. In our well-equipped laboratory, our products are tested and released upon passing inspection. The tests may include electrical, optical, and temperature and humidity assessments. In accordance with our company philosophy and as a consequence of our ISO9001 certification, we conduct incoming inspections to ensure reliable deliveries to our customers.

Assembly Technology: Handling systems, feeding technology, robotic systems, circular switchgear, Testing Technology: Electrical tests (high voltage testing, ground conductor testing, resistance testing), flow tests, leak tests, tactile measurement technology, length measurement technology, run-out testing, visual inspection systems (camera systems) Consulting (MTM analyses; engineering, project planning) Technologies: Soldering, USS, hot stamping, screwing, riveting, tumbling, bending, dosing, welding, feeding, marking (stamping, laser, inkjet)...

... of up to several 10,000 volts. Our satisfied customers come from all sectors of the German and international economy, including automotive, medical, safety, electrical engineering, as well as aerospace and military.

Since 1984, MIKRO-M GmbH has been developing and producing testing devices for surge protection, initially custom test automation systems for industrial use in quality assurance, ranging from simple testing stations to complex testing and sorting systems that perform millions of tests per year. MIKRO-M positions itself as a system provider, offering necessary support throughout the entire...

... customers on-site. Since July 2008, ÖKO-LUBE Deutschland GmbH has been a recognized inspection body for recurring tests and inspections of large containers (IBC). Right at your location, we can conduct independent inspections with the extensive equipment of our service vehicles. In May 2011, it was decided to further qualify the company and become a specialist company according to the Water Resources...

Thermographic measurements for inspections of electrical systems and thermal bridge diagnostics in buildings, air tightness measurements of buildings, blower door tests, energy consulting, pipe break detection.

Auto workshop, maintenance and repair of all vehicles. Conducting vehicle inspections and emissions tests. Inspection of all car brands and models. Sale of auto spare parts.