separator systems Germany

Strong performance – pure air Especially in today's world, where coolant pressures, cutting and process speeds in machine tools are constantly increasing, more and finer aerosols are being generated. These must not and cannot be released into the environment or the production hall without proper filtration. AFS has been one of the leading German manufacturers of air cleaning devices and systems ...

...Centrifugal Separator (Cyclones) Centrifugal separators, sometimes referred to as cyclones, cyclone separators, cyclone filters, or whirlers, are used in large-scale industrial systems to separate solid or liquid particles contained in gases (for example, dust). A centrifugal separator essentially consists of four parts: the inlet cylinder (top), the cone (middle), the particle collection...

...The solid separator (sand or screw separator) is used for the separation and dewatering of rapidly settling solids (e.g., sand, scale, slag) from wastewater or process water.

...Mobile metal detector for connection to a vacuum filler including separation mechanism Metal separators of the MEATLINE 07 O series are connected to the output of vacuum fillers in sausage production. Mechanical connections for all common sausage and ham fillers are available, as well as electronic control adapters for signal exchange between the filler, metal detector, and subsequent systems such as turners or clippers.

Bristol Filter Germany was founded in 1982 in Dombühl, Middle Franconia. In 1985, we exported our filter systems for the first time abroad and now have distribution partners in countries including the United Kingdom, China, the Netherlands, Austria, Spain, the Czech Republic, Thailand, and Turkey. Bristol has been part of the family-owned Ten Oaks Group since 2022. We specialize in providing the...

...Our core competencies include the planning, construction, and installation of separator systems for hazardous media.

In 1972, the mechanical engineer Peter Schröck founded Uniflex-Hydraulik GmbH in Frankfurt am Main. Thanks to groundbreaking innovations and exceptional product quality, the thriving company quickly became one of the world's leading providers of machines for the production of hose lines. Since 1992, Uniflex-Hydraulik GmbH has been part of the Freiherren Waitz group of companies. This laid the fou...

...The thicknessGAUGE O.IMS is used for stable thickness measurement of coating on separator film. The system is designed as a compact O-frame and uses a white light interferometer that traverses over the battery film. Thanks to the innovative technology, the thickness measurement is contactless from only one side. Two transport rollers stabilize the film belt.

... high-quality corrosion protection. •Larger buildings, industrial companies, individual streets •Facilities that cannot be drained using natural gradient •As protection from backwater damage •Infrastructure facilities such as airports, industrial parks, subway systems etc. Product features One tank with two separator systems Two rotary pumps and motors according to type and operating location...

...Absorption air separator for closed solar systems and for heating systems with thermal insulation.

...TECAU pre-separator cyclones without a fan serve downstream filter systems for the separation of grinding particles and chips; conditionally usable for mass-laden grinding sparks. www.tecau.de...

...Large-area hammer mill with hammer cassettes for floor drainage and screen change through the doors, hammer mill feeder Duplex 9405 820 with heavy part and iron separator, hammer mills - after-container Planning, manufacturing, installation, and commissioning of a grinding system with connected big-bag filling.

...The system is designed for the treatment of kitchen wastewater after the grease separator or for the removal of hydrocarbons (oils / fats / lipophilic substances). Product/Application: Kitchen wastewater Solid content input: via grease separator, separation through pre-filter Total membrane area: approx. 13.6 m² Permeate flow rate: 2000 L/h...

...Performance: 80kg/h Electrical Power in kW: 13 Pressure Regulator: Medium-Low Pressure 50 mbar Ambient Temperature: -20 to +40°C Max. Pressure: 25 bar Gas Outlet Temperature: 50 to 65°C Dimensions (WxHxD): 800x1600x400mm Voltage: 400 Volt Input: Flange DN25 / PN40 Output: Flange DN25 / PN40 Info: Evaporator in stainless steel housing with integrated liquid separator and mechanical shut-off...

...WASH-TEC (Separator Cleaning) In the ventilation ceiling with integrated WASH-TEC exhaust trapezoidal ducts, the extraction occurs via a slot extraction system with separators connected in a second row. This separator is cleaned with interval control.

...Advantages Parallel alignment of multiple magnetic separators enables a large flow-rate Extrem durable construction Magnetic rotor up to 1.600 mm width High filtration degree due to optimized design Area of application For the separation of ferritic impurities out of coolants with low requirements on the purity degree, as well as a pre-cleaning step in front of filter systems. Flow rate Various filter sizes and the modular design enable any required flow rate. classification number - Filter aid without Filtration degree - Medium oil and emulsion Filter material magnetic rotor...

... deteriorates rapidly, and the cleaning effort increases. Therefore, the demands on screening technology are very high for household waste and other waste of similar nature. The shortcomings of conventional screening technology were known to EuRec® and formed the basis for a complete redesign. This led to the development of the EuRec® Disc Separator DSK.

... pool. Wet paint particles in trace amounts that are not captured by the water curtain are collected by the separators at the suction channels behind the water curtain, and the exhaust is supplied with fresh air. The backwashing system is applied in the separator section to support the process of retaining the wet paint particles in the separators. The filtration efficiency, whose contact area is increased by spraying wash water through the nozzles, is maximized.

...Our aerosol separators are suitable for the separation of oil and emulsion mists as well as other liquid air pollutants in the form of mists and aerosols. Areas of application: • Single workstation extraction • Central extraction systems • With and without fan component • Fan performance according to application • Vertical airflow...

...The swirling wet separator is suitable for the separation of grinding dust, even with sparks, as well as for sticky or moist particles. The advantages of the device lie in its simple and trouble-free operation. Pumps or nozzles that could cause disruptions are not in use. The air is cleaned by swirling the dust with water. The dust particles present in the airflow are enveloped and bound by...

... insulation and 5 mm foil cover in RAL 9006 silver, removable Operating pressure: max. 3 bar Test pressure: max. 6 bar Temperature: max. 110 °C Equipment: 1 smooth tube heat exchanger for solar with 1 inch female thread, return layer pipe for temperature-dependent layering of the heating return, stratification separator plate and stratification loading device, (sensor strip under zipper from 600...

...High-performance separator multi-stage executable fluctuating flow rates often for retrofitting existing systems low pressure loss...

... by a microcontroller. Battery Separators: A battery separator connects your starter and main battery during charging, so you only need one charger. During discharge, the battery separator disconnects the starter battery from the main battery. Battery Monitors: A battery monitor (also referred to as battery protection) disconnects the battery current to the consumer when a preset voltage is reached. These battery monitors are available for 12V or 24V.

...Separation adapters are available from 8 to 336 poles, with jumper bridges or switches, with additional signal taps or switching functions, and easy custom manufacturing. Our separation adapters are used to connect test systems and control devices. We produce everything in-house with our own employees, achieving an optimal price-performance ratio. There is the possibility to create a custom solution for every customer requirement, which means very high flexibility for the users.

... material: stainless steel —Height difference in upward transport: up to 5 m —Height difference in downward transport: up to 7 m —Chain widths: 190.5 mm, 304.8 mm, 381.0 mm, 457.2 mm —3 designs: 0°, 90°, 180° —Conveying speed: up to 50 m/min —Product weight: up to 25 kg —Optional with guide separator Optional Equipment: —Product guidance, product-dependent design —Supports for stabilizing the conveyor systems at the desired conveying height —Other attachments: sensors, stops,...

... residual separation of emulsified oils and fats as well as heavy metals after a pre-treatment by a separator system. The systems have proven effective in the food industry and washing stations, both as standalone units for indirect discharge or recirculation, as well as a pre-treatment stage before biological systems. By further cleaning the wastewater, compliance with limits regarding pH value, hydrocarbons, lipophilic substances, and heavy metals is ensured. COD and BOD values are significantly reduced.

... the static load of the systems, as well as chemical and weather-related stresses. They are available in materials such as PE, PP, PPs, PPs-el, and in special cases, PVDF. For more information, please visit our website or contact us directly.

... motor, coupling or v-belt drive, drive guard, separator with oil mist eliminator, air cooled heat exchanger, recirculated seal line controls and high temperature alarm switch. Options include: inlet isolation valve, inlet check valve, vacuum relief valve, inlet filter, control panel and system skid plate. An oil sealed liquid ring system is more tolerant of carryover and wear, and it provides quiet...

Special construction in the fields of environmental technology, wastewater treatment technology, water treatment, extrusion technology, plant engineering, and food technology...

... cleanliness along with fresh air. Extensive accessories expand the application possibilities of these innovative devices. You will be amazed at what is possible. Of course, all our suppliers are certified according to DIN ISO 9001. The Vivenso® captures the sucked-in dirt using a two-stage separator in a water tank. Vivenso® has received multiple awards, including two Plus X Awards: 1. Best Product...