area systems Germany

...years of expertise, and service quality are guaranteed in every area. From maintenance and assembly work to legally required inspections according to UVV for systems and devices such as crane systems, winches, lifting and pulling devices, power-operated gates, electrical devices and operating resources, lifting and load handling equipment, lifting platforms, shelves, ladders, PPE, as well as...

... Operational Safety: • Fire protection for the control cabinet (FMEA) • DGUV testing according to VDE standards • After-run measurement according to DIN EN 13855 for safety light barriers We are THE solution provider and contact for industrial special solutions. We operate in the following metropolitan area: Würzburg, Schweinfurt, Marktheidenfeld, Wertheim, Miltenberg, Tauberbischofsheim...

... the standard program with current ratings up to 2500 A, we manufacture cabinets for measurement, control, and regulation systems of all kinds. Furthermore, our qualified specialists implement custom designs, complete control rooms, including state-of-the-art visualizations, as well as technical solutions that deviate from the standard. The cabinet manufacturing process adheres to high quality standards and is a crucial component of the comprehensive automation solutions offered by ATL Regeltechnik.

...In 2000, BRE-Service GmbH was founded. Initially starting with 7 employees, we conducted safety inspections and UVV inspections, maintenance, and repairs on automatic sliding doors, automatic swing drive systems, and hold-open devices in the Leipzig/Halle metropolitan area. The development and implementation of high-quality yet cost-effective service concepts for inspected doors and gates has...

... modules into your company. This guarantees clear identification and traceability of your products. We are specialists in the area of UDI (unique device identification) labeling for medical devices. Dr. Harald Oehlmann is a welcome representative for expert presentations and workshops at the international level.

... machining centers is done either directly at the machine or via programming stations with CAD-CAM systems. Order organization using an ERP system. The organization and control of workflows from the quotation phase to shipping and invoicing are realized through the ERP system. Operational and machine data are directly captured and evaluated in production via barcodes. On a production area of 1,500 m...

... 2015. An additional production line was installed, which also resulted in an increase in personnel. A further significant expansion of the production area occurred in 2019 with a total investment of around 2 million euros. Here, the largest production line 4 to date was put into operation.

... and reliably to your requirements. For every type of cargo, we can provide the right vehicles. State-of-the-art IT systems support us in precise pre-planning and responsive scheduling. Our freight department organizes all types of transport for you and takes care of all the important steps to make the process as convenient as possible for you.

... PiEPER was founded in December 1991 in Hermsdorf. Production began in 1992 with six employees. In 2008, a new logistics center was built with approximately 1,700 m². Additionally, a new system for the surfaces zinc and zinc-nickel was put into operation. Today, over 85 qualified specialists work on state-of-the-art systems across approximately 20,000 m² of factory area.

... machine construction. We manufacture, among others, for: Tool construction, mold construction, general machine construction, heavy machinery construction, mining, tunnel construction, fixture and template construction, defense technology, vacuum, hydro, and high-pressure technology, steel and hydraulic engineering, plant construction, conveyor systems construction, press construction...

... engineering, laboratory, and medical technology. Founded in 1990, we have extensive experience in the development of microcontroller systems, as well as control and communication solutions. Our expertise extends beyond electronics to include housing development and reaches up to series production, including individual series testing. SYS TEC electronic boasts extensive experience in the implementation...

... EMC-optimized layouts. Manufacturing-optimized layouts. This results in lower costs for both circuit board production and assembly. Modern CAD/CAM systems (Protel, Target, Eagle, Router Solution) allow for the import of customer data in various data formats for further processing, correction, and enhancement. Production State-of-the-art technologies combined with over 20 years of experience...

... the industrial area of Schwarzenbek near Hamburg under the name SEA – Sauerland Elektroanlagen GmbH. Professionals for Floodlight Systems As a master craftsman business in electrical engineering, the special expertise lies in the area of sports facilities, large-area, and street lighting. Additional services include cable trenching, cable measurement technology, and the installation of...

... manufacturing from simple pipe cutting – through further processing such as bending, shaping, drilling, punching, to welding, soldering complete assemblies, etc. a complete solution or also gladly partial solutions from our manufacturing portfolio. •…in the area of surface technology, we also offer special galvanic coatings in the area of double nickel-chrome (processes in both chrome 6 and REACH...

... office building provide excellent conditions for our activities. Powerful planning systems and engineering enable us to respond precisely and quickly to even the most detailed requests. Through innovative thinking and action, a customer-oriented organization, and manufacturing, we offer tailored, individual solutions. Starting from detailed consultations with our specialists, through careful...

... produce HP and LP equipment. In addition, we established a service location in Hamburg in 2011. Since 2018, we also offer steam coolers and ball valves. We supply control and filling ball valves, shut-off and emergency shut-off valves (SAV), skid systems including EMSR technology, injection coolers, drive steam coolers, and steam distribution stations.

... production capacities of our plant are approximately 2,500m² of coating area per day. At the same time, we are opening new dimensions for powder coating with our large part coating system: components up to 13.0x2.5x3.6m or 17.5x1.0x2.0m with wall thicknesses over 50mm and piece weights up to 3,000kg can be coated by us automatically or manually. In addition to powder coating, ENVIRAL® offers...

... ensured. These trainings are conducted, for example, at TÜV, with suppliers, or in-house. A consistently high safety standard is maintained through certifications as a specialist company according to the Water Resources Act, waste disposal specialist, and repair company according to §54 Measurement and Calibration Ordinance. A dedicated suction pressure cleaning vehicle and a dedicated tank storage facility for hazardous waste ensure flexibility in tank cleaning. The necessary electrical installations for the systems are also implemented directly.

...In the area of special machines and special systems, we develop individual solutions for our customers that are precisely tailored to your specific requirements. At Arinko Bautzen, a medium-sized family business, quality, innovation, and customer satisfaction are at the forefront.

... technologies. This starts with processing using current CAD and CAM software, modern manufacturing in turning and milling, and measurement with a laser tracker from LEICA. To integrate your new system into your company as effectively as possible, we install your new manufacturing systems on-site. With our laser tracker, we conduct a final measurement to document your deserved quality and our precision.

... expanded. A second operational area for individual parts and small series production was established. CNC technology was introduced in the area of individual parts and small series production with punching and laser cutting systems, CNC-controlled sheet metal shears, and bending presses. In series production, CNC technology was also introduced in the area of punching systems. 1990 The quality...

... - Screen printing - Pad printing - Digital printing The various processes allow us to offer our customers a wide product range. For example, screen printing produces front, keyboard, and labeling films, nameplates, and promotional stickers. The pad printing process allows for the printing of three-dimensional objects such as housings, buttons, optical lenses, and promotional items. Digital printing produces items such as banners, display systems, posters, and textiles. Etching technology rounds out our offerings. Certified according to DIN EN ISO 9001:2008...

...Today, the "OHLOMAT" program includes many models with different variants to meet all the requirements of our customers' packaging products. The program is complemented by conveyor systems and additional machine accessories for perfectly coordinated complete solutions.

... specifications. Our Competencies CNC Turning We manufacture for you on modern CNC automatic machines in the bar area up to 65 mm; the automatic loading machines are supported by robotic loading and pickup stations. We offer you a wide range in the diameter ranges of 8 to 400 mm. For batch sizes between 50 and 10,000 pieces, we are particularly attractive for you! CNC Milling With our four-axis milling...

As a sales representation for our partner companies, we have been active in the representation area of Hesse, Saarland, parts of Rhineland-Palatinate, and neighboring regions since 2003. We see ourselves as your partner in designing and setting up flexible workplace systems primarily in metalworking companies, and we can draw on over 20 years of experience and activities in relevant industrial enterprises. Our partner companies are among the most renowned and, in some cases, market-leading companies that offer innovative and future-oriented products and continuously develop them further.

... through inductive heating. We currently have 19 systems that allow us to process all component sizes from a few grams to diameters of 400mm and lengths of up to 1,500mm. Our generators are also designed for this range and enable different frequencies. We produce large series on high-performance fully automatic machines. The machinery is continuously expanded and adapted to the latest process...

... our employees are of the highest priority. On a production area of over 15,000 m² and with more than 160 employees, metal products are manufactured on behalf of customers in a three-shift operation. Fourteen state-of-the-art laser systems for cutting and welding form the core of our processing spectrum. This is complemented by CNC bending presses, straightening, blasting and tumbling systems, as...

... implement it with the production of a special machine. We also build special machines according to customer drawings. On the other hand, we offer our customers a variety of solutions in the field of automation technology. In the area of robotics and image processing, we collaborate with well-known companies. Furthermore, we provide pneumatically or servo-driven handling systems, gripping technology, portal solutions, and much more.

...Klimamann GmbH offers efficient and environmentally friendly heat pumps, split units, VRV air conditioning systems, and refrigeration technology for the entire Rhine-Main area and surroundings. Whether it's climate control for apartments, gastronomy, medical practices, or hotels - we have the solution, the expertise, and the necessary performance potential. As a certified master company, we...

... provision of laser systems on a rental basis has defined the core business from the very beginning. Based on our diverse laser applications, mobile laser processing of large components on-site, as well as the processing of individual pieces and prototypes, have been developed into a main business area. A broad base of experience, high flexibility of the laser systems, and sufficient robustness of the...