power supply system Germany

... the application range of your drive systems, for example: - Rail-bound transfer carts with gap crossings in intersection areas, - Applications in indoor and outdoor areas where barrier-free installation of the power supply is not possible, - In paint booths and other environments that are not designed for electric supply, - As a cost-effective solution for long travel distances – without the...

... buttons located on the front panel. The devices are installed in a control cabinet or a similar protected enclosure. The EGE evaluation electronics from the product series SKM 420; SKM 520; SKM 552 are suitable for a power supply of 24 V DC or 230/115 V AC.

...The Siegling Blizzard press is supplied in a transport box equipped with transport rollers. It is quick and easy to set up thanks to its compact dimensions and lightweight construction. Once connected to the power supply, it is immediately ready for operation, as it does not require any complicated connections to external subsystems. The controls, compressor, and cooling system (air) are integrated into the press. This allows for savings in both time and costs, avoids handling errors, and ensures hygiene at the assembly site.

...• Dimmable wall/ceiling recessed spotlight, extra flat • Aluminum housing with stainless steel finish • Easily combinable in a lighting system with LED strips by using the same power supply • Available in white tones of 2,700 K, 3,000 K, 4,000 K, and 5,000 K • Beam angle: 40° • 2 versions: adjustable and fixed • Equipped with high-quality LEDs from OSRAM • Easy installation with integrated...

...while the IP67 protection rating and 15-year warranty provide lasting reliability. Maximum efficiency in a small format The Deye micro-inverters of the SUN-M60/80/100G4-EU series are perfect for small PV projects such as balcony power plants or solar systems on garage roofs. With an AC output power of 600-1000W and a single-phase power supply, they deliver maximum performance in a compact format. This way, you can make the most of your solar system even with limited space.

... resolution with 110+dB signal-to-noise ratio •,Compact dimensions (70 x 100 x 150 mm) •,Freely scalable! From an amplifier with 8 channels to multiple devices with any number of channels (e.g. 32 devices with a total of 256 channels) •,2x Ethernet interfaces, connection for external 12V power supply, LVDS connection for synchronization of several Dragonfly amplifiers (IRIG and GPS optionally available) •,Various options for connection design (depending on signal conditioning) •,Integration of further devices of the Dragonfly series to expand the range of applications...

... changing channels. Special profiles are possible on request. Impact-free recharging thanks to the exclusive recharging cycle. The recharging cycle is based on the patented recharging mechanism of the Multi 3000. After fast and precise bar removal, the material is gently placed on the loading prism. The Mini Shaft Loader is connected to the bar feeder. This takes over the power supply and...

... for lighting or massage functions. Especially for the care sector, the controls can be equipped with additional useful safety features such as first-failure safety or Trendelenburg positioning. The power supply is exclusively provided by the external power sources of the limoss MC1 series.

...Measurement post made of PVC/PMMA plastic with autonomous power supply through solar technology and complete integration of all system components. Measurement post with integrated solar technology. Complete integration of all system components into the measurement post. Monocrystalline solar module with translucent filter plate in post color to protect against vandalism. Integrated, replaceable...

...The BL ident® connection program offers pre-assembled connection cables in various versions (Standard, Economy, and Food & Beverage) for secure communication between the interface and the read/write head, as well as pre-assembled bus and power supply cables. Accessories include, among others, mounting adapters for read/write heads and data carriers, as well as protective frames for read/write heads.

...The INFICON Vacuum Gauge Controller 031 (VGC031) is designed for use in conjunction with the INFICON Pirani Gauge Enhanced 050 (PGE050) and acts as a convenient power supply, control and readout. VGC031 and PGE050 are a flexible combination to monitor your vacuum system in the range from 1.3 × 10 -4 up to 1333 mbar (1 × 10 -4 up to 1000 Torr). The VGC031 with its space saving panel mount housing...

... tank with separator system One centrifugal pump and motor according to type and operating location required One non-return valve AWASTOP DN 100 K Level measurement Pump control type AWAmaster 1 1.5 m power supply cable, with CEE plug LGA certified according to DIN EN 12050-1 /. -4 Tank:G-AI Si12 (Alu 230) Coating:Acrylic combination paint coating...

... Particular challenges include oiling and coloring wooden floors, which require a high surface quality. The TRIO handles this task exceptionally well. Its ergonomic design allows for incredibly easy handling with minimal physical strain. Both changing the grinding medium and the dust bag can be done quickly and effortlessly. The integrated filter system ensures very efficient dust extraction, enabling nearly dust-free grinding. Single-phase alternating current: 220 V / 1.8 kW Power supply protection: at least 16 A Disc diameter: 200 mm Disc speed: approx. 600 rpm Number of discs: 3 Total weight: 78 kg...

...Track system for LED lights for medium to large areas. Individual tracks can be connected mechanically and electrically with plug pins. A dimmable ballast supplies the power rail with 24 volts, providing a maximum of 150 VA through two triangular panels. Due to its high conductivity, this system can be installed over a length of more than 20 meters without a visible power supply. In this case, a...

... Housing for 3 slots for 100 x 160 mm cards with passive or active cooling Power supply for rail, automotive, or industrial applications with a wide input range Multiple CPU units and a large selection of peripheral cards...

... - 60 meters of highly flexible push cable (9mm Ø) - Stable ball joint with quick-change system for the control unit Item number: 5-0036-302 Power supply: 12 - 24 V DC via external power supply (100 - 240 V AC) Type: Compact system...

... avoided by pigeon populations. The complete set (sufficient for 30 linear meters) consists of: Stainless steel rod 2mmØ, 1.50m long 40 pieces UV-resistant plastic spikes 90 pieces Connecting spring stainless steel 2 packs of 100 pieces Connection sleeve 3 x 30 stainless steel or copper 2 packs of 100 pieces Sleeve for wiring 5 x 7 stainless steel or copper 2 packs of 100 pieces Power supply, high-voltage cable, and other wiring are not included in the set!

... standalone or inline version. Base Configuration: • 19” rack, 50HE, IP55 • 19“ PXI rack, 4HE, 12 slots • PXI - RT Embedded Controller • PPSU Programmable Power Supply • PSU Fixed Voltage Source • PXI - DMM with 7½ digits • PXI - Function Generator • PXI - Analog Card • PXI - Digital I/O Parallel • PXI - Relay Matrix • PXI - Relay 4x1 MUX • G12 Virginia Panel Test Specimen Interface High-Level Applications: With the appropriate configuration, the test system can also be used in the field of aerospace technology, thus meeting the highest standards.

...Double-walled ISO transport tank and storage tank; Centaur® tank modules with ISO transport frame The Centaur modules enable a flexible, stationary fuel supply. Up to 5 Centaur TC-QI-3000F can be mounted on a 20 ft ISO standard transport frame. With the piping and its own control system, it is possible to use them to supply decentralized units with minimal equipment. The unit only requires signals for the fuel levels of the day tank and the power supply for the tank modules. The Centaur tank modules can be transported filled, making them versatile in application.

... applications in water supply where, for example, there is no power supply available in elevated tanks or pumping stations. The specifications in detail are: - Receiver sensitivity 116 dB - Transmission speed up to 140 kBit/s - Access Point, Client, Router, and Bridge in one device - 400..480 MHz, 10mW to 10 W, adjustable - Range without line of sight several kilometers - RS232, USB - 128 Bit AES encryption and firewall - 4 digital inputs, of which 3 can be configured as pulse inputs - 2 analog inputs - SDI-12 input - Configuration and diagnostics via USB...

...Our enclosed module featuring an internal power supply and printhead driver board, enables communication between the DOD printhead technology and the MPERIA controller through an Ethernet connection. V-Links can be stacked and networked through MPERIA®, providing a flexible and scalable system for small or very large applications.

...Offgridtec Backup Kit 19.2kWh Pylontech Battery - Victron MultiPlus II 48/10000 - The backup systems from Offgridtec are ideal for emergency power supply or for expanding an existing solar system. The systems include Pylontech lithium-ion batteries, a compatible MultiPlus-II inverter, and a Cerbo GX from Victron Energy for system monitoring. This ensures that you can maintain your power supply...

...EtherCat 19" Rack with Power Supply for Digital and Analog I/O Plug-in Cards...

...°C. In the event of a sudden system failure, the intelligent energy storage system of the HM6 ensures an uninterrupted power supply. Optimize your photovoltaic system with our innovative battery storage system from ESY Sunhome. Efficiently utilize the electricity generated during the day while simultaneously storing excess energy for the night or future needs. The all-in-one system features an...

...34 - 50 liters Vacuum chamber closure: Hinged door, automatic door Gas supply: Mass Flow Controller (MFCs) Generator: 40 kHz; 80 kHz; 13.56 MHz; 2.45 GHz Pressure measurement: Pirani, capacitance manometer Electrodes: according to customer specifications Control: Basic PC (Win. CE), Full PC (Win. 10 IoT) Power supply: 400 V / 50 - 60 Hz Vacuum pump: according to customer specifications...

...Power Management Controller for power supply and system protection Can be used as an independent system or as an extension to a NORISYS 4 automation platform Option for connecting a colour touch panel as HMI and visualisation USB port for configuration and service RS-485 for NORISYS 4 ExtBus communication Generator set control with automatic start/stop function Parallel and isolated operation Automatic synchronisation Generator protection functions, 3-phase Power supply protection function, 3-phase Approvals pending: BV, DNV, GL, LR...

... every requirement, from high-bay warehouses to low open areas. All light carriers can be controlled on/off or are available with a DALI interface. Emergency lighting systems or sensors can also be easily integrated into the light band. The power supply in emergency operation is provided via battery or central battery. Read more https://suw-licht.de/nlt-led-lichttraeger-neuanlage Data sheet: https://suw-licht.de/fileadmin//resources/products/NLT/Datenblatt-NLT-2021_web.

...Solar power storage systems store excess energy generated by your solar installation and make it available when needed. Our storage solutions offer high capacity, long lifespan, and are ideal for continuous energy supply.

...The M 1201 is identical in construction to our M 1401 except for the power supply. We equip this machine with a 220-volt-asynchronous motor with Steinmetz circuit for high flexibility in places where no 3-phase current is available. This way it can also be operated by a conventional generator in remote locations such as removed brines in quarries. The M 1201 is also very easy to operate, it has...

...The UPS system ensures that in the event of a power outage, your electrical devices are supplied with power until your diesel generator takes over the supply.