motor transport Germany

... MechLift is constructed from telescoping aluminum profiles. These are anodized and therefore completely maintenance-free. The motor and gearbox are well protected and mounted in the upper part of the outer profile. The integrated lifting unit is easily accessible for inspections or any maintenance work. The MechLift can be delivered with a wide variety of suspensions, control units, and gripping tools in various dimensions. Typical application areas for the MechLift electric include, for example,...

... actuator profile is compatible with an endless number of widely available standard fixing accessories. The motor can be connected to the units by means of a full or a hollow shaft Up to 3,000mm strokes Sizes from 40 x 51.5mm up to 100 x 122.5mm Versions available with long sliders and multiple sliders Using linear rails from the COMPACT RAIL family ensures excellent performance in terms of speed...

... load in ideal conditions) due to directly driven motor. > Short charging time. JLA-e 5/12 G = 3-4 hours. > Rotatable 360°. > Continuously adjustable speed. > Compact external dimensions. > Compatible with chassis from the G series. Chassis are not included in the delivery. > Lifting available upon request > LiFePo battery technology > Charger switchable 110V/220V > Tested according to DGUV V68 (D) Load capacity: 25 t Towing capacity: 50 t Installation height: 230 mm...

...The FMK prepared mortar tub was specially developed for the transport of prepared mortar and is optimized for daily use on construction sites. Features: — Flexible, unbreakable PE, specially developed for construction — High manufacturing quality — Sturdy frame — Solid wear ribs protect against abrasion — Transportable by crane thanks to its robust handles — With normal use and regular maintenance, the German certifier TÜV confirms a minimum lifespan of 5 years. Accessories: — Customization with proprietary colors or printing...

...Pumps for the transport of clean water including drinking water - Continuous operation possible - Motor runtime approx. 450 to max. 500 h Technical data: Weight: 135 grams Flow rate: 10 l/min Delivery height: 5 m Diameter / Height: max. 38 mm / 104 mm...

... existing bunker • Possible installation dimensions Key Figures • Lengths: up to 6,000 mm • Widths: up to 2,500 mm • Throughput capacities: up to 10,000 t/h • Drives: Magnetic vibrator, unbalance motor, unbalance exciter...

... 2.4 mm — Water-cooled hose package, 8 m — Pull rod B — Transport case Applicable range mm | inch: DI 9.5-60.5 mm | 0.374"-2.381" Max. welding current: 200 A Wire motor: 24 V DC Rotation speed: Max. 5 RPM Wire spool: 1 kg, D100 Wire diameter: 0.8 - 1.2 mm Weight without wire feeder: 8 kg Weight with wire feeder: 10.5 kg Weight with wire feeder/AVC: 11 kg...

... friction coefficient and long service life - Optimized surface structures for the whorl and motor side - Reduced belt slip and maximum power transmission - Energy-efficient tension carriers made of polyester or aramid - Polyamide tape tension carriers with good damping properties for high circumferential forces - Low noise and vibration operation - Antistatic equipment...

... vertical band saws can make precise cuts in challenging materials (non-ferrous metals, aluminum, steel, inconel, titanium) quickly. This is made possible by the robust design combined with anti-vibration gray cast iron components. The sawing feed system is driven by a ball screw and servo motor in conjunction with BEHRINGER's sensitive cutting pressure sensor system, ensuring high cutting yields and...

...with tiltable aluminum sliding table 1000x800 mm - cutting height 424 mm - cutting length 700 mm - wheel diameter 500 mm - saw band length 3720 mm a) for three-phase 400 V, 50 Hz, motor power 1.3 KW b) or single-phase 230 V, 50 Hz, motor power 1.3 KW - saw band only, to be selected based on the type of stone material - with crane hooks and 2 transport wheels - noise emission Lpa according to...

...90°, 75°, 60°, 45°, 105°, 120°, 135° - Power supply: 3 N - 400 V/50 Hz/16 A - Protection class: IP 65 - Motor power max.: 1.5 kW For more information, please refer to the data sheet. Data Sheet Loading Bridge P1530i (250 KB)...

... transport of persons in the car is available upon request. Lifting height:max. 24 m Nominal speed:0.15 m/s Pit depth:150 mm Nominal load:2,700 - 3,500 kg Cabin width:2,500 - 3,000 mm Cabin depth:5,500 - 6,400 mm Cabin height:2,100 mm Stops:2 - 4 Accesses:2 - 8 (one above the other or opposite)...

... design and resulting maneuverability make it suitable for smaller surfaces. Despite its relatively low weight, the PROFIT can achieve good work quality and satisfactory sanding performance. Applications with the PROFIT: The PROFIT is primarily used for sanding wooden floors. Its strengths lie particularly in facilitating renovation work and treating small and hard-to-reach surfaces. Single-phase AC motor: 230 V / 1.8 kW Protection fuse: at least 16 A Roller speed: approx. 2800 rpm Roller width: 200 mm Abrasive band size: 200 x 551 mm Total weight: 44 kg...

...For the supply and disposal of spur tracks, picking and pallet storage areas, as well as for connecting conveyor lines arranged offset to each other, transport vehicles are used. The basic construction consists of a welded frame with an integrated chassis. The movement can fundamentally be achieved by directly driving the wheels or via timing belts. When using timing belts, the motor can be...

...Suitable for simple applications, such as rail transport, cost-effective solution ✓ NEMA 17/23 Max. Speed 2000 RPM ✓ Custom cable lengths Compatible with stepper motor driver ECOSTEP 54 Peak torque: 0.22...1.8 Nm (depending on motor type) Option: Holding brake...

...HUBTEX driver seated electric tow tractor with hydraulic gooseneck. Three-wheel running gear with solid rubber tyres in compact design. For fast and reliable handling (towing and pushing) of cargo trailers upto 50 tonnes. AC driving motor battery powered electric drive (80V) indoor and outdoor application full rubber tyre equipment system loads between 32 and 50t hydraulic gooseneck ergonomic arrangement of the operational controls driver seat position crosswise to the direction of motion...

...• Above-mounted SoniXs ultrasonic strapping unit • Automatic height detection of the support plate based on package height • Optimal accessibility • Electrically driven support plate with gearbox brake motor • Plastic strap dispenser • Siemens control system with touch panel • 2-column design starting from 2,200 mm clearance width [KZV-111] • Above-mounted strapping unit • 1 SoniXs...

...Hürner-Funken radial fans are used for the transport of chemically aggressive exhaust air. Thanks to the EC motor with integrated control electronics, simple speed regulation is possible. Speed controllers and repair switches are pre-wired. The flow rate is between 100-3000 m³/h with a maximum total pressure difference of 1600 Pa. The radial fans are available in nominal diameters of 125-250 mm...

...Efficient conveyor systems with a single-phase motor. Conveyors for powders > 1 μm and free-flowing grains when they need to remain intact.

...Loads are lifted and moved daily using lifting devices. Unlike, for example, conveyor belts, the load is freely suspended with lifting devices and is not guided. Typically, lifting devices are powered manually, motor-driven, or electrically, and materials such as ropes or chains are used as lifting means. The load capacity of lifting devices can range from a few kilograms to hundreds of tons...

...Transport dimensions: Attention Overlength!! Width: 2.92 m Height: 1 m Length: 16.6 m Transport lead time due to individual approval approx. 10 days Operational dimensions: Width: 4.06 m Height: 9.98 m Length: 22.70 m Hopper capacity: 7.0 cbm - Opening 4,800 x 3,900 (L x W) Loadable with wheel loader! Task size: approx. 150 mm Drive: Drive unit CAT constant speed motor C4 - 98 kW, Stage IIIA Stockpile height: Approx. 9.0 m (24°) Stockpile capacity: Approx. 1,315 cbm (Manufacturer's specification) Conveyor belt width: Belt width 1200 mm Weight: 19.6 t...

... Benefits at a Glance * Minimal product heating * Optimum homogenization * Adjustable comminution rate * No fusion or adhesion of material * Reduced cleaning time * User-friendly, ergonomically optimized cleaning in preconfigured cleaning position * Material transport in mixing container for greater logistical efficiency * High flexibility * Wide range of tool and motor combinations enable use in many different mixing tasks * Low energy consumption...

... servo motor drive - Soft start mode to enhance performance and reduce drill breakage - Adjustable dynamic transport speed of the stacks via servo motor drive - Performance: up to 1500 stacks/hour depending on stack height, vibration duration, and paper quality...

...\nSpecial version possible up to 6.20 m height\nTurns: 180 degrees (double-sided turn)\n90 degrees\nWorking position (not fully darkened approx. 50 degrees)\nDaylight transport function (open at the top, closed at the bottom)\nLight directing function","Special Features":"Helps with climate regulation\nSaves energy through light-reflecting slats\nCost-effectiveness\nElasticity","Operating Methods":"Crank drive, motor drive, radio drive, smartphone operation"}...

...In our electric motor workshop, we repair power tools, motors up to 200 kW, generators, and pumps. We also inspect large motors on-site upon request. If a repair is unavoidable, we will remove the motor and transport it with our own fleet to our fully equipped workshop.

...Conveyor belt with center drive, with head drive, with integrated light, incline conveyor The wide range of belt widths and lengths makes the IFC conveyor belts versatile for use as accumulation and transport lines, as well as for feeding and sorting small parts. A 24V EC motor with a continuously adjustable belt speed of up to 72 m/min, selectable rotation direction, sealed stainless steel bearings, and protection class IP 54 make them suitable for challenging production conditions.

...Numerous variants of our roller conveyors enable the ideal transport of many goods. Due to the modular design, the conveyor system can be precisely tailored to your requirements. Roller conveyors mainly differ in their drive type and geometry. We use the following components for our conveyor systems: Driven roller conveyor Friction accumulation roller conveyor Roller conveyor with integrated motor roller Idle / gravity roller conveyor Roller curve...

...The SmartLift is easy to transport; it moves under its own power to the construction site and ramps into the vehicle with its powerful drive motor. SmartLift 380 The SmartLift is easy to transport; it moves under its own power to the construction site and ramps into the vehicle with its powerful drive motor. The lift head can be rotated in all directions and can also be telescoped 550 mm...

...BM 8410 / 8420 Straight, Head Drive The belt conveyor is designed for the transport of unit goods that are not suitable for roller tracks, on a level surface and for all types of unit goods on inclines and declines. The belt conveyor is standardly equipped with a drum motor (BM 8420), while a geared motor is available as an option (BM 8410). Not suitable for reversing operation. Electrical Power: Max. 1.1 kW Conveyor Speed: 0.1 to 2.5 m/s Max. Load Capacity: 50 kg/m Max. Load Capacity per Module: 220 kg Motor Type: Drum Motor / Geared Motor Rated Voltage: 400 V Incline/Decline: Max. 6°...

...High Performance and Stability The QX22 is the ideal machine for the rapid transport of goods over longer distances. Its high load capacity (2.2 t), excellent speed (10 km/h), substantial battery capacity (315 Ah), and mobile battery charging station make the QX22 series the best choice for multiple handling. Required Load Capacity: 2200 kg Drive System: Walk-behind or Stand-on Platform Fork Length: 1150 mm Fork Width: 170 mm Drive Motor Rated Power: 2 kW Min. Required Battery Capacity: 230 Ah...