heat treatment furnaces Germany

...To achieve optimal results, the temperature, heating time, holding time, as well as the cooling rate and method must be adjusted according to the material and dimensions. Our heat treatment facility is equipped with seven heat treatment furnaces, either as chamber or pit furnaces, with a capacity of up to 40 tons and a maximum temperature of 1,250 °C. This includes a fully automated heat treatment furnace compliant with the NORSOK M-650 standard. Treatments performed include hardening, tempering, solution annealing, and stress relief annealing.

...Gas carburizing furnaces, gas nitriding furnaces, air circulation furnaces, tempering furnaces, protective gas hood annealing furnaces, heating hoods, chamber furnaces, continuous furnaces. For more information on heat treatment systems, visit our website! As unique as our customers' products are, we manufacture the suitable furnaces individually. From continuous furnaces for titanium parts just a few millimeters in size to shaft furnaces for shafts over 13 meters long. Each furnace is planned and manufactured individually.

...Austenitizing under an active protective gas atmosphere. Low-distortion quenching in a salt bath and subsequent tempering in a convection tempering furnace. The continuously increasing demands on components make the right heat treatment process indispensable. To develop tailored solutions, we assist you in selecting the appropriate material and the corresponding heat treatment process. To bring your workpieces to the correct hardening temperature, we rely on chamber furnaces, allowing us to flexibly assemble small batches.

...In our continuous furnaces, we anneal steel, stainless steel, and copper.

...The Protherm 470 controller is designed to monitor, control, record and archive heat treatment processes running in a furnace or simultaneously in multiple chambers. They are configurable for various types of batch and continuous furnaces. Installations are done on new or refurbished furnaces and are used for updating existing systems. FEATURES • ½ DIN multi-loop embedded programmer with a color...

...… for heat- treatment of special materials under high temperatures and vacuum. - Inductively heated vacuum heat treatment furnaces with high operating temperatures specially for the manufacture of hard materials. Standardized components for a broad application spectrum and useful space volumes from 34 to 338 litres. Applications: IOV furnaces are used for all high temperature processes and...

...Frames and supports are essential in heat treatment facilities to harden the workpieces in a vacuum furnace. Steel frames are still commonly used, but they exhibit significant warping, as vacuum furnaces can reach temperatures of up to 1300°C, and steel has a high thermal expansion. CFC frames made from GE100 do not warp, even when different temperature profiles are applied, resulting in a longer...

...Professional industrial furnaces for industrial heat treatment...

...Our heat cabinets and tempering furnaces are versatile in application. In the field of heat treatment of metal parts, for example during tempering for hydrogen embrittlement relief or for preheating plastics, industrial furnaces from FST Drytec find wide applications. Sophisticated control systems with user-friendly interfaces and microprocessor-controlled temperature regulation and monitoring ensure the highest process safety and universal applicability.

... optionally extended electrically. The ovens are equipped with precise digital controls and certified heating elements to ensure excellent temperature stability. These ovens can be used for hardening, normalizing, stress relieving, and other heat treatment processes up to 1200 °C.

...Our chamber furnaces, with a usable volume of approximately 1m³, are designed for a variety of applications and heat treatment processes. Heating can be done either electrically or with gas, for furnace temperatures ranging from 100° to 1300°C. All chamber furnaces are characterized by relatively high energy efficiency.

For over 20 years, the UMECC Group, with locations in Germany, China, the USA, and Canada, has established itself as a reliable partner for the steel industry, providing high-quality equipment at competitive prices. In addition to our focus on the steel industry and rolling mills, we offer solutions for mining, coking plants, power plants, as well as the cement and sugar industries. Our portfolio...

...Chamber furnaces with holes are specifically designed for loading using a manipulator, equipped with a very robustly constructed shaft plate. This ensures that the furnace chamber is well protected during the loading process. Our chamber furnaces are used in forging shops as well as for the heat treatment of high-quality products. The sealing at the sensitive point "door" is perfectly resolved by...

...In the construction and repair of furnaces and thermally operated systems, products made from various insulating materials are required. Here, we offer calculations, selection of insulating materials, design of insulation, and, if desired, installation for the following applications: Furnace and furnace car insulation, metallurgy and heat treatment, reactors, as well as heating technology and...

... accommodate multi-track 4, 5, and more cylinder crankshafts. Protective gas continuous furnaces for heat or surface treatment. Belt furnaces for relaxing metal structures, electrically or gas heated. Chamber furnaces for small batches/special application cases.

...Heating elements and components made of molybdenum, molybdenum-lanthanum, or tungsten High-temperature components For heat treatment at very high temperatures under vacuum or protective gas atmosphere, many components made of refractory metals are used. Our product range includes high-temperature components for furnaces used for annealing (hot zone), hardening, soldering, sintering, MIM (metal...

...Chamber furnaces have a more or less large volume in which workpieces undergo heat treatment, such as hardening. The opening of the chamber furnace is usually done via hinged doors, flip tops, or lift doors. The latter allows for use in confined spaces. Chamber furnaces are often designed as convection ovens. These ovens are also suitable for drying processes of components or for "outgassing" volatile substances. The chamber furnaces shown here operate in the temperature range of 180 °C to 950 °C.

...In the heat treatment facility, our products are tempered in an 800 kg vacuum furnace and two tempering furnaces. Modern process control and constant monitoring ensure the highest reproducibility in heat treatment, securing consistent quality and durability of the final product. Batch assignment guarantees quality assurance-compliant traceability of the entire production process.

...For aluminum special profiles Roller hearth furnace system as solution annealing furnace and heat treatment furnace, air quenching, water bath, and roller tracks...

...The horizontal continuous furnaces from CeraCon have been developed for the automated, precise, and cost-effective heat treatment of components. They can be equipped as tunnel furnaces with various transport media and are suitable for a wide range of different components and application processes due to their standardized dimensions and components used. They are ideal when the dwell time at temperature is relatively short or the cycle time is relatively long. Let’s have a brief conversation about your requirements. We are happy to assist you. +49(0)7934–9928–530 thermalsystems@ceracon.com...

Welcome to 6 decades of induction expertise! Inductoheat Europe - your contact for all questions regarding inductive heating and heat treatment! As part of the globally active Inductotherm Group, we are the technology leader in Europe in the field of inductive heating. We develop, produce, and distribute induction heating systems for various industrial applications at our headquarters in...

... production of vacuum furnaces, which have since been continuously developed and adapted to current technical and customer-specific requirements. The entire range of SCHMETZ furnace systems offers solutions for various heat treatment processes, such as hardening, tempering, deep freezing, annealing, soldering, and sintering.

... 4 m or 6 x 5 x 3 m. Annealing under protective gas is possible depending on the product range. Heat treatment is carried out in computer-controlled large annealing furnaces and is documented in a revision-secure manner, also in multiple languages if required. Complementary services such as blasting and priming are optionally carried out after annealing. Annealing processes: - Stress-relief annealing - Soft annealing - Normalizing - BG - annealing (FP - annealing) - GKZ - annealing - Pearlite annealing - Ferritizing - Stabilization annealing - Solution annealing - Special treatments...

... outputs from 200 kg/h to 15,000 kg/h. Heat treatment: Annealing, hardening, tempering, drying, solution annealing, warm storage. Turnkey industrial furnaces and machines from a single source, state-of-the-art, consumption-optimized heating systems with minimal pollutant emissions, excellent mechanics with well-developed sealing systems, stable, requirement-oriented steel constructions for our products, optimized controls.

...That's right, until now you primarily knew us as a manufacturer and supplier of high-quality spare parts for industrial furnaces. But AVION is much more. A lot more. We would like to provide you with our many years of expertise from our intensive work in the heat treatment industry, now bundled for your benefit. Therefore, we have reorganized our portfolio and now offer you not only the usual...

... of our facilities is of great importance to us: Our continuous furnaces are fully automated and monitored. Our hardening furnaces are equipped to the latest standards, ensuring seamless documentation and online monitoring of the systems. The area of CQI-9 is also highly prioritized at Kirchhoff Hardening. The latest plant technology with fully automated control allows for heat treatment and documentation according to this specification. Do you want to have your items hardened? Then you are exactly right at Kirchhoff Hardening. Contact us for a personalized offer.

...We manufacture industrial furnaces for debinding, (high-pressure) sintering, and heat treatment of, for example, hard metals / sintered metals / ceramics / magnets / powder metallurgy products as batch and continuous furnace systems. Furnace atmospheres and temperatures are designed for the specific process and tailored to customer requirements.

... computer that stores all relevant material and treatment data. The vacuum system used features high-pressure gas quenching and variable flow reversal. Special vacuum tempering furnaces with protective gas flushing ensure that batches treated in vacuum retain their bright surface. Special salt bath systems provide optimal results through their uniform heat supply and removal. The facilities listed here...

The history of H+K Hardening and Surface Technology began with two small hardening furnaces. Today, our company is a full-service provider for all heat treatment processes and boasts a comprehensive, state-of-the-art facility. In the field of vacuum hardening, we are a leader in southern Germany with a capacity of over 13 systems. We are also well-prepared for the future: H+K Hardening and...

... design, simulation, manufacturing, coating, cleaning, and technical support of carbon and ceramic-based materials for companies in Europe, the Middle East, Africa, Asia, and America. The key industries served cover the segments of: Industry, Metals, Heat Treatment, Automotive, Solar (Photovoltaics), Semiconductors, and Aerospace.