bimetal Germany

... an isolating washer. The resilient preloading disk ensures excellent performance. The resilient preloading disk keeps the contact pressure constant throughout the entire temperature range of the BEDIA switch until switching occurs. The mechanically and electrically unloaded bimetal disk snaps over at a preset temperature, with either opening or closing the contact arrangement. The bimetal will only snap back to its initial condition after the temperature has dropped significantly.

GGB contributes to creating a world of movement with minimal friction loss through plain bearings and surface technologies. With research and development, testing and production facilities in the USA, Germany, France, Brazil, Slovakia, and China, GGB works closely with customers worldwide on customized tribological design solutions that are efficient and environmentally friendly. GGB's engineers s...

...Two-stage high-performance rotary vane pump with a suction capacity of up to 22 m³/h With 3-phase motor With temperature sensor (bimetal) for optimal motor protection Integrated gas ballast and HV safety valve For all applications in rough and fine vacuum areas Special feature: Worldwide use due to various motor voltages...

...Adjustable bimetal temperature controller with snap-action contact. As temperatures rise, the switch opens its contact upon reaching the set temperature and automatically closes the circuit again after cooling down. The temperature controller can be directly screwed onto the heating surface to be monitored, allowing for quick responses to temperature changes. The temperature controller is used...

...Bimetal switches as normally open or normally closed. Available as twin or triple, 6 and 25 A. Standstill heaters are designed to prevent condensation and avoid frost damage when motors are idle in cold environments. The product range includes a standard version, optionally with or without additional glass fiber insulation, as well as two other versions for use in explosion-prone areas. Usage...

...Open, close, or monitoring function tailored to the customer's requirements. Please contact us regarding the necessary specifications for your application. A key element of a temperature-controlled bimetal switch is a bimetal strip or disc (a composite of two metals with different coefficients of thermal expansion). The strip bends under temperature influence and activates a snap switch. The switches cause the circuit to open or close, allowing a process (heating, cooling, pumping, etc.) to be initiated or stopped.

...Bimetal sheets, welded copper and aluminum, primarily used as connecting parts for copper-aluminum connections. 70% aluminum and 30% copper.

As an internationally oriented family business, SIKA has stood for reliable and precise measurement, control, and calibration technology since 1901. In SIKA products, over four generations of accumulated expertise and extensive market knowledge combine with state-of-the-art technology and innovative solutions. At our headquarters in Kaufungen, in the heart of Germany, we develop and produce high-...

...We offer a wide range of temperature limiters with a reset button. A bimetal temperature limiter reacts when a preset temperature is reached and interrupts the circuit (signal or direct load circuit) until the reset pin on the limiter is activated, manually restoring the switch to the 'on' position. All series are available in various designs or can be custom configured.

...Easy integration into the electroplating production line Strip guidance on rollers PLC for tracking defective parts Application in electroplating and bimetal production Use of standardized image processing software Geometry inspection Surface inspection Use of black-and-white and color cameras with appropriately matched lighting...

...Lightweight - Maintenance-free (with aluminum pin caps) - Lifetime lubrication - Reversible Motor type: Asynchronous short-circuit rotor motor, IEC 34 (VDE 0530) Insulation class of the motor winding: Class B, IEC 34 (VDE 0530) Voltage: 230V / 50Hz (IEC 38); 115V / 60Hz (on request) Frequency: 50 Hz Shaft seal, internal: Double lip, NBR Protection class: IP64 Thermal protection: Bimetal switch Ambient temperature, single-phase motor: +10 to +40 °C Rated power, single-phase motor: 0.050 to 0.085 kW Rated torque, single-phase motor: 9.3 to 18.4 Nm Max. pipe length SL: 602 mm...

...Thermostat for Fan Control with Normally Closed Contact Thermostat for fan control with normally closed contact, adjustable range 0-60°C Switching temperature difference approx. 7K (+/- 4K), sensing element made of bimetal, snap action contact, switching capacity 10A, AC 250V, connections 2-pole terminal 2.5 mm², snap-in technology for DIN rail mounting, IP 20 Dimensions 43x33x60 mm (H,W,D) Approval: VDE Weight: 0.05 kg Catalog page: B1.1 Temperature: 5-60°C...

...Description Tooth division 8/12 M42 steel Bimetal bandsaw blade Universally applicable Suitable for series cuts of all metal types Teeth made of high-speed steel with 8% cobalt and 10% molybdenum Product description Universally applicable, economical, and durable: Our duoflex® M42 is an all-rounder for series cuts of all metal types. You can use this powerful bimetal bandsaw in both production...

...A bimetallic coil made of two welded metal strips with significantly different coefficients of thermal expansion forms the measuring element. The coil is attached to the end of the sensing tube and connected to the pointer axis at the other end. Properties The property of the bimetal to bend or stretch due to the unequal length expansion of both metal strips in response to temperature changes...

...The IRM2Ex stands out as a bimetal thermostat due to its compact dimensions combined with high switching performance. It is excellently suited for frost protection applications in conjunction with heating cables as well as heating plates. The thermostat is encapsulated in an M20x1.5 cable gland and can be installed in an Ex e type explosion-proof housing. Other temperature ranges are available...

...The KOBOLD temperature monitors operate with a bimetal switch and are used to monitor liquid temperatures in piping systems and containers. The devices are available in brass or stainless steel and are screwed into a welded fitting on the line or container via a G ¾ threaded connection. The temperature contacts have a fixed switching point in the range of 30 °C ... 50 °C with increments of 5 °C...

...Bimetal – sliding bearings available in low-maintenance and maintenance-free versions. Depending on the application, different bronze alloys are available. Available as cylindrical bushings, flanged bushings, thrust washers, sliding plates, and custom parts.

...VMaster® Viscous Air-Sensing Fan Drives The VMaster viscous air-sensing fan drive works smarter so your engine can work harder. Equipped with a bimetal precision sensor, the viscous air-sensing fan drive delivers the right amount of cooling required. A fan that operates at maximum speed only when cooling requirements demand it can cut fuel costs significantly over the life of the vehicle...

...Titanium carbide has established itself as a cutting material for granulating knives. Our bimetal knives combine the advantages of this high-strength hard material with cost-effective manufacturing. We exclusively solder in a vacuum, ensuring excellent stability of the soldered cutting edge. We manufacture the knives with our expertise and according to your specifications from: • Titanium carbide Nikro 128 or Nikro 143 • Bimetal, titanium carbide cutting edge in a base body made of high-strength stainless steel • PM materials • Various hardenable steels such as 1.2379, 1.4112, 1.4125, etc.

...Article Name: Trendline DN 125 Fan with Shutter & Timer Relay, Article Number: 60520 Length: 88mm Width: 174mm Height: 184mm Connection for NW 100, 125, 150 mm Horizontal or vertical installation Housing, grille, and impeller made of high-quality ABS plastic Closed, powerful motor Outer part of the fan with protection class IP X4, splash-proof Thermal overload protection Quiet, energy-saving motor Shutter: Louvres open and close automatically with a short delay via bimetal. Electronic timer relay Run-on time adjustable from 3 - 20 minutes.

... iron, 28 based on nickel, as well as numerous cobalt-based alloys - Bimetal cast parts CERTIFICATION - DIN EN ISO 9001:2008, Germanischer Lloyd, Lloyd’s Register, Bureau Veritas, TÜV Rheinland, Norske Veritas MACHINING & FINISHING - Numerous machining possibilities with a fleet of over 100 machines - Sawing / cutting - Deep drilling - Skinning - Chip removal machining (UGV) - Precision machining...

Thermik Gerätebau GmbH was founded in 1968 by Peter Hofsaess in Pforzheim. This inventor (192 patents) was the first to solve the problem of self-heating in bimetal switches. From then on, his goal was to build the best and most reliable temperature limiters in the world. Today, over 3 billion of these devices are in use worldwide. In the meantime, Thermik has become an internationally...

Roof cleaning systems by Lothar Kramer offer various solutions for roof cleaning: roof cleaning, roof coating, bimetal ridge elements, cleaning with a special lance system, photovoltaic cleaning. Together with the customer, the best option is selected.

... transmitters, fittings, bimetal thermometers, gas pressure thermometers, machine glass thermometers, resistance thermometers, thermocouples, protective tubes, temperature transducers, display devices, and more. Manufacturing according to DIN EN ISO 9001:2008 in Germany. Flexible manufacturing systems allow for customized solutions and quick delivery times at a good price. Talk to us, we are happy to meet your requirements!

... the in-house production of bimetal band saws. Ongoing developments in both business areas shape the product range. In the band saw sector, the new high-performance bimetal band saw duoflex PT Plus has been developed for universal use. Continuous product additions can be found in the carbide band saw product line. The company, with international subsidiaries in Italy, France, and the United States, employs approximately 300 staff and has a globally distributed distribution network. The company headquarters and production site are located in Augsburg.

...Control technology for household appliances; measurement and control technology; bimetal temperature controllers; temperature fuses; temperature limiters; safety temperature limiters; thermostats; thermal relays; temperature controller/fuse combinations; automation for mobile units; electronic control for working machines; outdoor controls; digsy; CAN bus; CANopen protocol; programmable logic...