bar fittings Germany

...Fittings according to DIN EN 2353 Available in steel as well as stainless steel. MATERIAL Steel with zinc-nickel coating from the Stauff-Connect line or stainless steel 1.4571 CERTIFICATION Certified by DNV GL PRESSURE RANGE Up to 800 Bar...

...Swivel joints, high-pressure pipes, and fittings for applications up to 7000 bar...

... obtainable strengths. Metering rods Ejector pins Fittings Ball bearings/Overrunning clutches >> Current alloy surcharges >> Current scarp surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round) Max. bar length 7,000 mm (6.0 mm to 16.0 mm round) Max. bar length 9,000 mm (> 16.0 mm round and on request) Length tolerance ± 25.0 mm Grinding From 0.5 mm to 32.0 mm round, tolerance zone IT 6 (Rm up to 1,600 N/mm² for bright steel for standard parts) > 32.0 mm to 60.0 mm...

...Piston valves for petrol or oil lines. The valves prevent the line from draining after the pump has been switched off. This type of valve is only used in applications above 5 bar. The opening pressure is set to the corresponding counter pressure.

... pressure: 20 bar, depending on design Insulated according to EnEV Construction length according to DIN EN 558-1-R20 Connection flange for drives according to DIN EN ISO 5211 Testing according to DIN EN 12266 ⇩ For details, please visit our homepage under "Data Sheet". Max. operating temperature: 200°C Max. operating pressure: 20 Bar...

...According to DIN2353 for pipe connections up to 60 bar...

i N O S O L offers hydraulic components, primarily from the field of clamping technology. We develop and distribute both our own innovative products and various high-quality products from renowned manufacturers. We always strive to generate added value compared to comparable products. This is not always possible. In any case, you will still receive high-quality products from us at a reasonable pri...

... stainless steel Body 1.4581/1.4571 or 1.4408 Actuator 1.4571 Membrane materials: CR, EPDM or FKM, optionally with PTFE film Versions Pressure range 0.3 - 1.2 bar Pressure range 1.0 - 2.5 bar Pressure range 2.0 - 5.0 bar Pressure range 4.0 - 10 bar Size: DN 15 - DN 150 Pressure: PN 10/40; ANSI #150, #300, Temperature: -30 °C to +230 °C Connections: Intermediate flange version Accessories: Spring-loaded cover joint and sealed with control connection...

... pressure points are approached with a pressure transducer and held for the programmed duration. Additionally, the system enables the application of a pulse pressure to the test specimen. The tests can be conducted and displayed as both trapezoidal and sinusoidal curves. Pressure ranges: up to 2,900 bar Fine control method: 0 to 50 bar Optional: Media & test chamber temperature control Vacuum testing: down to 0.7 mbar underpressure...

...Tapered stems DIN 20034 material: steel, galvanized working pressure: 16 bar Category Compressed-air technology / Compressor fittings / Taper sleeves Product number supplier 333092500 Cone:3 For hose inner-Ø mm:25 Nominal size:20 Thread:- Total length mm:105 Zollnr:73079980 Weight:189 g Content:1 STK Barcode:333092500 Price Unit:1 Packaging Unit:1 quantity min:1 VAT key:19.00 %...

...Fittings Ø 8 - 28 mm max. 125 bar -196°C to +120°C for seawater, thermal fluids, mineral oils, gasoline, various gases...

... threads, a butterfly valve, and a solenoid valve. Additionally, the fermentation tank has Tri-Clamp connections for CO2, a yeast discharge, a clear drain, as well as an insulated, cooled cone with an angle of inclination of 72 degrees. An integrated CIP ball allows for 360° spraying. The working pressure is limited to a maximum of 2.2 bar and is regulated by a pressure relief valve and a vacuum valve. Furthermore, a pressure relief device and a hop dosing chamber for dry hopping are integrated. The connections can be executed as either Tri-Clamp or milk pipe fittings.

... horizontal and vertical configurations. With the help of these steam generators, steam pressures of up to 100 bar and higher can be achieved. The quick steam generators can also be designed as directly fired pure steam generators. In this case, all media-contacting parts, such as the pipe coil, pump, and fittings, are made of stainless steel.

... UNI Dicht fitting consists of the fitting body and the individual insulating entry. 6,000 pieces for 20,000 application-specific fittings Metal and plastic variants M4 to M120 or Pg 7 to Pg 48 as well as NPT, CTG, or inch threads Protection class IP 68 (10 bar) and IP69 CEM, ATEX, hose, corrugated tube, and angled fittings Operating temperatures -40 °C to +130 °C (TPE-V) or -60 °C to +200 °C (silicone) Reduced and expanded construction shapes Material: stainless steel...

... are suitable for hydraulic fluids of types H, HL and HLP in accordance with DIN 51524 / 51525-1. If you have questions about areas of application or other options, we are happy to answe Working Pressure:max. 350 bar min. 10 bar Stroke:under ISO 2768-1m ± 2mm Temperature:max. 80 °C min. -20 °C Lateral Forces:maximum Lateral Forces 5% of Longitudinal Forces larger Lateral Forces are available on request. Piston Speed:max. 500 mm/s min. 1 mm/s Sealing System:PTFE...

... polished smooth Optional: chamfered faces Optional: with connecting fittings The dimensions are based on the standards of the housing manufacturer. Please coordinate dimensions with us when enquiring or send us a sample. Other versions and dimensions on request.

...Press fittings PERFECT in nickel-plated brass - a perfect solution for passing cables for various industrial applications. Features: — integrated strain relief — twist protection — wide clamping range — for cables from 3 to 48 mm — easy installation — temperature: -20 °C / +100 °C (dynamic) -40 °C (static, temporary) — protection class IP68 - 5 bar / IP69 — certifications VDE / UL / DNV — wide range of designs and accessories Materials: Nickel-plated brass Protection class: IP68 - 5 bar / IP69 For cables with diameters: 3 - 48 mm...

...MAXIMATOR valves, fittings & pipes are suitable for various media and operating pressures up to 10,500 bar.

...among other things, clamping and cutting ring connectors. The screw connection typically consists of 3 parts: the body, a ring, and a nut. The pipe is inserted into the connection body through the nut and ring. By tightening the nut, a secure connection is created, causing the ring to clamp or cut onto the pipe. This program is available in plastic, brass, steel, and stainless steel, and is complemented by an accessory program (fittings) made from the same materials.

...The lateral highpressure valves are valves with two or three connections and two switching positions. The pressure range extends from vacuum up to 500 bar. In this type of construction, the valve drive is not arranged coaxially, but laterally.

...DN 15 - DN 150, PN 3 - PN 6 - Type 800.801 Usage: Acids, alkalis, corrosive liquids, water, wastewater, sludges, solid-containing, crystallizing, and pasty media, etc. Design: open construction, free passage, without packing gland, with replaceable hose insert, with forced actuation, with built-in spring, with adjustment screw. Materials: see table Operating pressure: DN 15 – 80 max. 6 bar DN 100 max. 5 bar DN 125 – 150 max. 3 bar Flange connection: DIN 2501, PN 16, DIN 2533 / EN 1092 – 2, PN 16...

...The fittings of the brand "SANHA Ref HP" (Series 29000) include high-pressure solder fittings for copper-iron pipes intended for use in the piping of cooling systems. The fittings are made from the material copper-iron (CuFe2P, CW107C) and meet all requirements of the VdTÜV material sheet 567 and the AD 2000 data sheet W 6/2. Usable up to 130 bar, for example in transcritical systems (cooling) in supermarkets. Reducing coupling, with internal solder ends on both sides.

...and minimal space requirements go hand in hand here. Benefits Due to the impulse control, these valves have a very low power consumption, making them ideal for use in electronically controlled fittings with battery operation. The valve is made entirely from drinking water-approved materials and has the certifications KTW, W 270, WRAS, ACS, and NSF 61. Nominal diameter::0.6 mm Pressure range::0.5 – 10 bar Operating voltage::6 VDC Power consumption::max. 1.4 W Protection class::IPG65...

... the pressure connection is realized through one or two vertical metallic fittings. The 15 x 15 mm² ceramic carrier and the ceramic housing give the pressure sensor high mechanical stability. The pressure sensors in this series have a digital signal resolution of 14 bits and are available in the following versions.

...and a maximum operating temperature of 60 °C. The distance from the ignition source to the fitting must not exceed 50 times the pipe's inner diameter. The installation of the deflagration pipe protection is permitted in both horizontal and vertical pipelines. Equipped with one or two thermal sensors, the fittings are short-term flameproof under atmospheric conditions with a burning duration of tBT = 1.0 min. When operating with only one thermal sensor, it must be installed on the side of the fitting from which a fire is expected.

... drive, an air supply is required. An electro-pneumatic control unit including pressure monitoring is included in the delivery. Type: AK-L Component description: Material Housing: PVC, PP, PE, PVDF, ECTFE, PP-FRP, PVC-FRP, PVDF-FRP Disc: PVC, PP, PE or PVDF Shaft: 1.4301 coated with plastic Seals: EPDM, FPM, FEP coated. Connection type: with flanges according to customer specifications Pressure: Standard: max. 0.1 bar overpressure or underpressure Temperature: PP/PE 80°C, PVC 60°C, PVDF 120°C...

... made from high-quality UBA-compliant materials. The material is hygienically suitable for drinking water and complies with legal requirements (Drinking Water Ordinance, UBA List). The reliable brass material ensures exceptional durability. The model is available in various designs. Pipe diameter: 20mm - 75mm Thread sizes: 1/2" - 2 1/2" Material: Brass or CUPHIN Dimensions: for PE pipes 20 - 75mm diameter Application: Cold and hot water up to 95°C Application: Gas up to 4 bar Application: Heating/District heating For pipe types: PE80, PE100, PE-Xa, PE-Xc, PE-RC, PE-RT, PP...

...The SecurityLINK UHPLC fingertight fitting system simplifies your system and column connections and provides consistent performance with torque limiting technology that prevents column damaging overtightening. Try SecurityLINK UHPLC fittings on your system today: - No tools required for quick and easy installation - Fitting self-adjusts at column inlet to ensure zero dead volume for better chromatographic results - Torque limiting technology prevents system and column port damage UHPLC and HPLC compatibility: pressure rated to 19,000 psi (1,310 bar)...

...EUROFIX bend protection fittings for movable cables, IP68 - 5 bar Material: Polyamide 6. Color: light gray = 0351, black = 0181 see last 4 digits of the order number Delivery time: approx. 3 working days...

...Mortar couplings, mortar plugs Made of ductile iron / galvanized steel and yellow chromated. For mortar transport, concrete transport, or screed transport at pumps, spraying devices, plastering machines, etc. Series TÜV tested System 23.5 Available as mortar coupling (female part) and mortar plug (male part) with - Hose nozzle 25, 35, and 50 mm - Internal thread 1", 1 1/4", 1 1/2", 2" Fittings are available separately or, upon request, completely assembled (=integrated) into the desired hose line. Operating pressure: 50 bar...