bar fittings Germany

...Fittings according to DIN EN 2353 Available in steel as well as stainless steel. MATERIAL Steel with zinc-nickel coating from the Stauff-Connect line or stainless steel 1.4571 CERTIFICATION Certified by DNV GL PRESSURE RANGE Up to 800 Bar...

...Swivel joints, high-pressure pipes, and fittings for applications up to 7000 bar...

... obtainable strengths. Metering rods Ejector pins Fittings Ball bearings/Overrunning clutches >> Current alloy surcharges >> Current scarp surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round) Max. bar length 7,000 mm (6.0 mm to 16.0 mm round) Max. bar length 9,000 mm (> 16.0 mm round and on request) Length tolerance ± 25.0 mm Grinding From 0.5 mm to 32.0 mm round, tolerance zone IT 6 (Rm up to 1,600 N/mm² for bright steel for standard parts) > 32.0 mm to 60.0 mm...

...Piston valves for petrol or oil lines. The valves prevent the line from draining after the pump has been switched off. This type of valve is only used in applications above 5 bar. The opening pressure is set to the corresponding counter pressure.

...Stainless Steel Auto Tankers/suspended Float Valves For High And Low Model:8-T2 Connection thread:½“ Valve seat in mm:12 Flow rate l/min (3 bar):30 Max. pressure:6 bar Dimensions WxDxH in mm:310x105x125/200 Weight in g:2000...

... pressure: 20 bar, depending on design Insulated according to EnEV Construction length according to DIN EN 558-1-R20 Connection flange for drives according to DIN EN ISO 5211 Testing according to DIN EN 12266 ⇩ For details, please visit our homepage under "Data Sheet". Max. operating temperature: 200°C Max. operating pressure: 20 Bar...

... screwed directly onto the original valve installed on the IBC container if it is leaking or defective, provided the corresponding thread is available. The IBC valve thus ensures quick, reliable, and well-measured complete emptying of the container. The valve is an essential accessory for properly connecting a hose or transferring from your IBC container. Max. operating pressure: 10 bar (at +20°C) Max. operating temperature: 80 °C...

...Thread extensions with cylindrical external and internal threads, up to 40 bar...

...According to DIN2353 for pipe connections up to 60 bar...

i N O S O L offers hydraulic components, primarily from the field of clamping technology. We develop and distribute both our own innovative products and various high-quality products from renowned manufacturers. We always strive to generate added value compared to comparable products. This is not always possible. In any case, you will still receive high-quality products from us at a reasonable pri...

... Actuator 1.4571 Membrane materials: CR, EPDM or FKM, optionally with PTFE film Versions Pressure range 0.3 - 1.2 bar Pressure range 1.0 - 2.5 bar Pressure range 2.0 - 5.0 bar Pressure range 4.0 - 10 bar Size::DN 15 - DN 125 Pressure::PN 10/40 Temperature::-30 °C - +230°C Connections::Intermediate flange version Accessories::Spring-loaded cover joint and sealed with control connection...

...Kendrion Automation has developed a high-quality range of non-return valves for applications requiring non-return and check functions. These one-way restrictors can be screwed directly into the ports of miniature valves or cylinders. They are designed as inlet or outlet restrictors and do have either tube nipple connection including nut or push-in fittings. Pressure range:0 - 12 bar Nominal orifice:2 mm Medium:Filtered (5 µm), lubricated or non lubricated air  Type of pneumatic connection:M5, tube 4x1 (4 x 0.65)  Valve type:Check valves and flow regulators  Ambient temperature:-10 ... +70 °C...

... pressure points are approached with a pressure transducer and held for the programmed duration. Additionally, the system enables the application of a pulse pressure to the test specimen. The tests can be conducted and displayed as both trapezoidal and sinusoidal curves. Pressure ranges: up to 2,900 bar Fine control method: 0 to 50 bar Optional: Media & test chamber temperature control Vacuum testing: down to 0.7 mbar underpressure...

...Fittings Ø 8 - 28 mm max. 125 bar -196°C to +120°C for seawater, thermal fluids, mineral oils, gasoline, various gases...

... range: 0.3 - 100 mPas Fluid connection: tubing, OD 1/8"; master capillary: tubing, OD 1/8"; secondary capillary: tubing, OD 1/16" Wetted parts: PEEK™; fittings and tubings: ETFE, PEEK™ Dimensions (L x W x H): 32 x 25 x 25 mm (By-pass block without pump) Weight: approx. 160 g (version 316L without pump) approx. 50 g (version PEEK™ without pump) Remarks: subject to technical changes...

... horizontal and vertical configurations. With the help of these steam generators, steam pressures of up to 100 bar and higher can be achieved. The quick steam generators can also be designed as directly fired pure steam generators. In this case, all media-contacting parts, such as the pipe coil, pump, and fittings, are made of stainless steel.

... UNI Dicht fitting consists of the fitting body and the individual insulating entry. 6,000 pieces for 20,000 application-specific fittings Metal and plastic variants M4 to M120 or Pg 7 to Pg 48 as well as NPT, CTG, or inch threads Protection class IP 68 (10 bar) and IP69 CEM, ATEX, hose, corrugated tube, and angled fittings Operating temperatures -40 °C to +130 °C (TPE-V) or -60 °C to +200 °C (silicone) Reduced and expanded construction shapes Material: stainless steel...

... are suitable for hydraulic fluids of types H, HL and HLP in accordance with DIN 51524 / 51525-1. If you have questions about areas of application or other options, we are happy to answe Working Pressure:max. 350 bar min. 10 bar Stroke:under ISO 2768-1m ± 2mm Temperature:max. 80 °C min. -20 °C Lateral Forces:maximum Lateral Forces 5% of Longitudinal Forces larger Lateral Forces are available on request. Piston Speed:max. 500 mm/s min. 1 mm/s Sealing System:PTFE...

... polished smooth Optional: chamfered faces Optional: with connecting fittings The dimensions are based on the standards of the housing manufacturer. Please coordinate dimensions with us when enquiring or send us a sample. Other versions and dimensions on request.

... threads, a butterfly valve, and a solenoid valve. Additionally, the fermentation tank has Tri-Clamp connections for CO2, a yeast discharge, a clear drain, as well as an insulated, cooled cone with an angle of inclination of 72 degrees. An integrated CIP ball allows for 360° spraying. The working pressure is limited to a maximum of 2.2 bar and is regulated by a pressure relief valve and a vacuum valve. Furthermore, a pressure relief device and a hop dosing chamber for dry hopping are integrated. The connections can be executed as either Tri-Clamp or milk pipe fittings.

...Press fittings PERFECT in nickel-plated brass - a perfect solution for passing cables for various industrial applications. Features: — integrated strain relief — twist protection — wide clamping range — for cables from 3 to 48 mm — easy installation — temperature: -20 °C / +100 °C (dynamic) -40 °C (static, temporary) — protection class IP68 - 5 bar / IP69 — certifications VDE / UL / DNV — wide range of designs and accessories Materials: Nickel-plated brass Protection class: IP68 - 5 bar / IP69 For cables with diameters: 3 - 48 mm...

...Tapered stems DIN 20034 material: steel, galvanized working pressure: 16 bar Category Compressed-air technology / Compressor fittings / Taper sleeves Product number supplier 333092500 Cone:3 For hose inner-Ø mm:25 Nominal size:20 Thread:- Total length mm:105 Zollnr:73079980 Weight:189 g Content:1 STK Barcode:333092500 Price Unit:1 Packaging Unit:1 quantity min:1 VAT key:19.00 %...

...Operating pressure 15 bar, black, smooth, EPDM, reinforced with synthetic textile threads, 4 times burst pressure, also available in RED. Nitrosamine-free, option for permanent fittings attachment. Cover: EPDM, black, smooth, highly abrasion-resistant, antistatic, aging and weather-resistant. Suitable for conveying compressed air, water, and mild chemicals. Ideal solution for lubrication systems. Temperature resistance: -40°C to +100°C...

...MAXIMATOR valves, fittings & pipes are suitable for various media and operating pressures up to 10,500 bar.

...among other things, clamping and cutting ring connectors. The screw connection typically consists of 3 parts: the body, a ring, and a nut. The pipe is inserted into the connection body through the nut and ring. By tightening the nut, a secure connection is created, causing the ring to clamp or cut onto the pipe. This program is available in plastic, brass, steel, and stainless steel, and is complemented by an accessory program (fittings) made from the same materials.

...The casing of the FITOK Push-On multipurpose hoses made of synthetic fiber (MP series) is weatherproof, abrasion-resistant, and oil-resistant. The synthetic fabric reinforcement ensures maximum strength and tear resistance of the end fittings. These hoses can withstand a working pressure of up to 20.7 Bar (300 PSI) and are available in blue, black, green, gray, red, and yellow.

...The lateral highpressure valves are valves with two or three connections and two switching positions. The pressure range extends from vacuum up to 500 bar. In this type of construction, the valve drive is not arranged coaxially, but laterally.

...DN 15 - DN 150, PN 3 - PN 6 - Type 800.801 Usage: Acids, alkalis, corrosive liquids, water, wastewater, sludges, solid-containing, crystallizing, and pasty media, etc. Design: open construction, free passage, without packing gland, with replaceable hose insert, with forced actuation, with built-in spring, with adjustment screw. Materials: see table Operating pressure: DN 15 – 80 max. 6 bar DN 100 max. 5 bar DN 125 – 150 max. 3 bar Flange connection: DIN 2501, PN 16, DIN 2533 / EN 1092 – 2, PN 16...

...The fittings of the brand "SANHA Ref HP" (Series 29000) include high-pressure solder fittings for copper-iron pipes intended for use in the piping of cooling systems. The fittings are made from the material copper-iron (CuFe2P, CW107C) and meet all requirements of the VdTÜV material sheet 567 and the AD 2000 data sheet W 6/2. Usable up to 130 bar, for example in transcritical systems (cooling) in supermarkets. Reducing coupling, with internal solder ends on both sides.

...and minimal space requirements go hand in hand here. Benefits Due to the impulse control, these valves have a very low power consumption, making them ideal for use in electronically controlled fittings with battery operation. The valve is made entirely from drinking water-approved materials and has the certifications KTW, W 270, WRAS, ACS, and NSF 61. Nominal diameter::0.6 mm Pressure range::0.5 – 10 bar Operating voltage::6 VDC Power consumption::max. 1.4 W Protection class::IPG65...