bars - ferrous metal Germany

...On request, we can supply aluminium alloys in the form of rod or bar. These are available in most of the commercially available aluminium alloys. The tolerances of extruded aluminium rods and bars can also be further improved by subsequent drawing. In recent years, ALUnna has specialised in the production of rod and bar meeting the highest quality standards. If you require a specific delivery option for rod or bar such as special testing then we will definitely find a solution for you.

...Round ∙ Square ∙ Flat ∙ Hexagonal bars + Bushings Pressed ∙ Drawn ∙ Extruded Diameter 3 – 350 mm Cut to fixed lengths or in production lengths Flat bars in intermediate dimensions cut from plates Special brass ∙ Red brass ∙ Tin bronzes Aluminum multi-material bronzes ∙ Nickel silver ∙ Copper-nickel Available upon request with factory certificate or inspection by a certification body Manufacturing process: Pressed...

... technical and economical solution. Special design: supplied as »open« multilayer expansion joint. On-site service available exclusively from the KOREMA® service team. Insulation is incorporated to protect the expansion joint against abrasion as well as for thermal insulation. The choice of insulating material, either mineral wool or ceramic felt, depends on the design temperature. For operation at or below dew point, a vulcanized elastomeric layer is available. Pre-assembled units, complete with liners and clamp bars, are available.

...Bars in various non-ferrous alloys available from stock...

...CALCAST® is a high-temperature insulation material made from calcium silicate, with densities ranging from 860 to 1,040 kg/m³. The application temperature limit is 1,000 °C. The material is not wetted by liquid non-ferrous metals, making it an ideal choice for casting systems in direct contact with liquid metal. CALCAST® provides insulation and is used for the distribution of liquid metal...

...Roll forming of all sheet metal materials such as steel, aluminum, stainless steel, copper, titanium, molybdenum, pre-painted materials, composite materials from 0.08 mm material thickness.

...Pure and high-purity metal wires and metal rods Iron as well as non-ferrous metal alloys, special alloys, and precious metal alloys Standard dimensions Diameter 0.25 mm / 0.5 mm / 1 mm / 2 mm x length Other dimensions and intermediate sizes available upon customer request Special dimensions Wires with diameter < 2 mm available in increments of 0.05 mm Rods with diameter 2 mm – 20 mm available in increments of 0.1 mm Available from stock or on short notice...

...Leading manufacturer of shear blades and shear knives for the steel and non-ferrous metal industry. Hot and cold shear knives for strips, plates, bands, sheets, edges, profiles, and bars.

Founded in 1972, RK Rose+Krieger GmbH is today a complete provider as a subsidiary of the globally operating Phoenix Mecano AG, offering a unique selection of products in linear technology, profile assembly technology, connection and modular technology. The range includes both catalog products and custom-made solutions, system solutions, and special developments. RK Rose+Krieger employs more than ...

Licharz GmbH is a leading manufacturer of technical plastics, specializing in high performance for industry and trade. With our headquarters in Germany and locations in France and England, we are active worldwide and can deliver quickly. Our product portfolio includes a variety of extremely durable technical plastics used in various industries. Why choose Licharz? - Tailored solutions: We offer ...

... procurement, and the range of delivery options. Your inquiries are processed promptly, and the offers are created non-binding according to your specifications, wishes, and ideas. Especially in the field of high-melting metals, we are your powerful partner. Our area of expertise includes standard parts – such as screws, nuts, and threaded rods – precious metal semi-finished products, as well as custom...

...We supply drawn wires starting from 0.025mm in all common • materials, such as stainless steel, nickel silver, brass, bronze, copper, aluminum, etc. • special materials like tungsten, titanium, molybdenum, tantal, etc. • heating element alloys and • EDM wires Sheets/Strips/Metal Foils • stainless steel, titanium, tungsten, molybdenum, bronze, nickel silver, etc. Round Bars • stainless steel...

... carbide); corrosion-free carbide; silicon carbide (SSiC & SiSiC); zirconium oxide (ZrO2); silicon nitride (Si3N4); aluminum oxide (Al2O3); metal-impregnated graphite Precision grinding for hard materials and hard coatings; flat, cross, round, and coordinate grinding, flat and round lapping & polishing; joining techniques: shrinking, soldering, gluing Our products: ceramics for technical...

BECKER Profile GmbH has stood for expertise in metal for over 50 years. Special profiles for customers in various industrial sectors are produced on a total of 13 roll forming machines in two plants. Thanks to process-integrated finishing operations, such as punching, embossing, marking, etc., highly customized and ready-to-install end products can be offered at a low cost.

...Wipro GmbH & Co.KG, is a small, young company that specializes in the production and processing of cold-rolled profiles of all kinds, industries, and quantities. The profiles made from steel, stainless steel, aluminum, and non-ferrous metals with various treatments (galvanized, painted; polished …) are manufactured according to the quality and precision desired by the customer. We can also take care of the finishing and processing of the profiles, as well as the packaging, picking, and storage until shipping to the end customer.

BIBUS METALS GmbH is a 100% subsidiary of BIBUS AG, a family-owned company based in Switzerland. The origins of BIBUS AG date back to 1947, when the sole proprietorship Dipl.Ing. Hans Bibus was founded, and in 1974 it was renamed BIBUS AG. BIBUS METALS GmbH, on the other hand, was established in 1990 and is engaged in the storage and distribution of sheets, bars, and pipes made from nickel and...

... in our daily collaboration with banks, corporations, and large companies in the aluminum industry. NE-METALLHANDEL IN STICHPUNKTEN The key facts about our company summarized: - Over 20 years of successful experience in metal trading - Partner of international banks, corporations, and other large companies in the aluminum industry - Delivery point for the aluminum products of our partners - Your contact for aluminum semi-finished products: aluminum profiles, aluminum bars, and aluminum pipes - Aluminum strips - Aluminum sheets - Aluminum die casting...

As an experienced specialist in the development of textile trade fair and object decorations, we are partners for event managers, planners, architects, exhibition builders, and event technicians. With a trained eye for feasibility, we take up your concepts and develop solutions together with you that showcase your messages. We know which materials are best suited for various technical requiremen...

hpulcas GmbH, located at the foot of the Ore Mountains, has invented and implemented a new process for the production of high-purity nickel. The new material quality meets and exceeds the requirements for Ni 270. The key to the process lies in the use of high-purity cathode sheets instead of nickel powder. The high purity level results in special and reproducible properties, which are utilized in...

1972: Foundation of HERMANUSSEN Metallverarbeitung GmbH 1975: Construction of the first hall with a profiling system 1978: Construction of the second hall with three profiling systems 1992: Acquisition of HERMANUSSEN Metallverarbeitung GmbH by Jörg Lehmann 1997: New construction: Storage & shipping area 3600 sqm production & storage space including 6 profiling systems 2007: Acquisition of the enti...

The two window sill systems GUNTIA®25 and GUNTIA®40 are technically advanced systems. The extruded profiles made of high-quality aluminum are available from stock in five finishes: Alu-Blank, EV1 anodized, and powder-coated in RAL 9016 - traffic white. A complete range of accessories complements the two systems. This includes an extensive color-coordinated range of aluminum fittings ...

The renowned and forward-looking medium-sized company has established a solid reputation within the scrap and recycling industry of the central Neckar region. Our committed membership in professional associations and disposal communities ensures that we always apply the latest disposal techniques and are, of course, certified.

Whether it's a lightweight, thin-walled aluminum profile or the large cross-section variant with excellent processing options and an aesthetically pleasing surface, we are your experienced and competent contact for aluminum profiles. Our range of services includes not only intensive technical consulting but also the construction of pressing tools. A clear advantage is that you have very short pat...

...flat bars, etc.). Finished machining according to drawing specifications. The main plant with foundry, machining center, turning shop, and sawmill is located in 56626 Andernach, along with 10 branches or sales offices nationwide. The QS-certified company maintains its own laboratory for all material testing as well as additional approvals and acceptance options as a material manufacturer. Young, dynamic, and team-oriented employees maintain close and satisfying relationships with our valued customers. Large stock of non-ferrous metal semi-finished products.

...IBL Metal Trading & Logistics is a powerful, medium-sized trading company for all metal semi-finished products made of aluminum, stainless steel, non-ferrous metals, industrial plastics, and some tool steels. We deliver our products regionally and also export them to neighboring countries. Many specialties, such as high-strength aluminum flat and square bars made of EN-AW-AlZn5.5MgCu (7075...

...MID-RHINE METAL FOUNDRY H. BEYER GMBH & CO. KG: Bars, tubes, bushings, flat bars, square bars, angle bars; BEYER-Electro extrusion and centrifugal casting in all copper and aluminum alloys DIN EN 1982 red brass, bronze, lead and phosphorus bronze, aluminum bronze, etc.; Non-ferrous metal semi-finished products brass, copper, aluminum, aluminum bronzes, gray cast iron, ductile iron in bars, tubes, strips, sheets, bushings, flat square bars, plate cuttings.

Cutting and distribution of aluminum semi-finished products such as sheets, plates, bars, profiles, and standard dimensions. As well as water jet cutting of contour parts and machining of milled and turned parts.

mvs Metallvertriebs- und Service GmbH is a medium-sized family business based in East Westphalia. We are a stockholding dealer specializing in non-ferrous metal semi-finished products, industrial plastics, and special materials, and we have made it our mission to combine traditional trading with modern services for the benefit of our customers. Thanks to a highly motivated team of innovative and...

... includes services - from technical consulting to research and development work, as well as contract manufacturing, rounding out the portfolio. Wickeder Group Portfolio: › Clad materials › Thermobimetals › Bars & wires made of nickel and nickel alloys › Nickel-based metal strips › Metallic foils › Etched micro-components › Centrifuges & water jet cutting › Contract manufacturing › Research & development › Technical consulting › Stamping. Bending. Welding.

Enpar Sonderwerkstoffe GmbH is the competent partner in the field of metal processing. With core competencies in material processing and inventory management, Enpar Sonderwerkstoffe is the material manager for nickel and titanium alloys, as well as special steel grades and alloys with unique technological properties. The wide range of products consists of semi-finished metal products: bars in flat, square, round, and hexagonal dimensions, forging stock, forged parts (rings, discs, etc.), sheets, plates, as well as pipes and pipe accessories.