bars - ferrous metal Germany

...On request, we can supply aluminium alloys in the form of rod or bar. These are available in most of the commercially available aluminium alloys. The tolerances of extruded aluminium rods and bars can also be further improved by subsequent drawing. In recent years, ALUnna has specialised in the production of rod and bar meeting the highest quality standards. If you require a specific delivery option for rod or bar such as special testing then we will definitely find a solution for you.

...Round ∙ Square ∙ Flat ∙ Hexagonal bars + Bushings Pressed ∙ Drawn ∙ Extruded Diameter 3 – 350 mm Cut to fixed lengths or in production lengths Flat bars in intermediate dimensions cut from plates Special brass ∙ Red brass ∙ Tin bronzes Aluminum multi-material bronzes ∙ Nickel silver ∙ Copper-nickel Available upon request with factory certificate or inspection by a certification body Manufacturing process: Pressed...

... technical and economical solution. Special design: supplied as »open« multilayer expansion joint. On-site service available exclusively from the KOREMA® service team. Insulation is incorporated to protect the expansion joint against abrasion as well as for thermal insulation. The choice of insulating material, either mineral wool or ceramic felt, depends on the design temperature. For operation at or below dew point, a vulcanized elastomeric layer is available. Pre-assembled units, complete with liners and clamp bars, are available.

...Bars in various non-ferrous alloys available from stock...

...CALCAST® is a high-temperature insulation material made from calcium silicate, with densities ranging from 860 to 1,040 kg/m³. The application temperature limit is 1,000 °C. The material is not wetted by liquid non-ferrous metals, making it an ideal choice for casting systems in direct contact with liquid metal. CALCAST® provides insulation and is used for the distribution of liquid metal...

...Roll forming of all sheet metal materials such as steel, aluminum, stainless steel, copper, titanium, molybdenum, pre-painted materials, composite materials from 0.08 mm material thickness.

...Pure and high-purity metal wires and metal rods Iron as well as non-ferrous metal alloys, special alloys, and precious metal alloys Standard dimensions Diameter 0.25 mm / 0.5 mm / 1 mm / 2 mm x length Other dimensions and intermediate sizes available upon customer request Special dimensions Wires with diameter < 2 mm available in increments of 0.05 mm Rods with diameter 2 mm – 20 mm available in increments of 0.1 mm Available from stock or on short notice...

...Hard metal, tungsten carbide, processing from quantity 1. Rings, bushings, dies, tools, rods, bars, plates, semi-finished products, blanks.

R.B GMBH is a registered company in Germany with its headquarters in Berlin, founded in 2004, and also has branches and partners across Europe. Our main activities focus on the import/export of wood. We serve all industries that require premium quality hardwood, softwood, sawn timber, construction timber, and roundwood, maintaining our competitive advantage by managing the entire supply chain fr...

...Stainless Steel, Non-Ferrous Metal, Aluminum Stainless Steel W.-St.: 1.4016, 1.4301, 1.4305, 1.4404, 1.4541, 1.4571, 1.4828, 1.4841 Sheets: cold rolled, hot rolled, polished, brushed, marbled, foiled Bars: Flat, Round, Hexagonal, Square, Angle Pipes: Square, Rectangular, curved + welded round pipes Non-Ferrous Metal Brass: Cu Zn 37, Cu Zn 39 Pb, Cu Zn 44 Pb Sheets, Flat...

...Leading manufacturer of shear blades and shear knives for the steel and non-ferrous metal industry. Hot and cold shear knives for strips, plates, bands, sheets, edges, profiles, and bars.

Founded in 1972, RK Rose+Krieger GmbH is today a complete provider as a subsidiary of the globally operating Phoenix Mecano AG, offering a unique selection of products in linear technology, profile assembly technology, connection and modular technology. The range includes both catalog products and custom-made solutions, system solutions, and special developments. RK Rose+Krieger employs more than ...

Licharz GmbH is a leading manufacturer of technical plastics, specializing in high performance for industry and trade. With our headquarters in Germany and locations in France and England, we are active worldwide and can deliver quickly. Our product portfolio includes a variety of extremely durable technical plastics used in various industries. Why choose Licharz? - Tailored solutions: We offer ...

... procurement, and the range of delivery options. Your inquiries are processed promptly, and the offers are created non-binding according to your specifications, wishes, and ideas. Especially in the field of high-melting metals, we are your powerful partner. Our area of expertise includes standard parts – such as screws, nuts, and threaded rods – precious metal semi-finished products, as well as custom...

... copper, brass, or aluminum. We offer the following forms of delivery: semi-finished products such as plates, sheets, foils, bars, wires, and pipes. Turned and milled parts, precision components, edge and bent parts, laser or water jet cut components, wire-eroded parts, standard + DIN fasteners, custom fasteners, micro screws, and titanium cast parts. As a surface finish, we offer brushed...

... For more than 90 years and already in the 3rd generation, we have been manufacturing metal semi-finished products. The needs of our customers are always at the center of our interest. This philosophy has made us an innovative and flexible family business that stands as a competent partner for precision metal semi-finished products in Europe.

... carbide); corrosion-free carbide; silicon carbide (SSiC & SiSiC); zirconium oxide (ZrO2); silicon nitride (Si3N4); aluminum oxide (Al2O3); metal-impregnated graphite Precision grinding for hard materials and hard coatings; flat, cross, round, and coordinate grinding, flat and round lapping & polishing; joining techniques: shrinking, soldering, gluing Our products: ceramics for technical...

BECKER Profile GmbH has stood for expertise in metal for over 50 years. Special profiles for customers in various industrial sectors are produced on a total of 13 roll forming machines in two plants. Thanks to process-integrated finishing operations, such as punching, embossing, marking, etc., highly customized and ready-to-install end products can be offered at a low cost.

...Wipro GmbH & Co.KG, is a small, young company that specializes in the production and processing of cold-rolled profiles of all kinds, industries, and quantities. The profiles made from steel, stainless steel, aluminum, and non-ferrous metals with various treatments (galvanized, painted; polished …) are manufactured according to the quality and precision desired by the customer. We can also take care of the finishing and processing of the profiles, as well as the packaging, picking, and storage until shipping to the end customer.

... range of aluminum profiles, customer-specific drawing profiles, bars, tubes, and coils. We have the largest stock offering in all of Scandinavia. Additionally, Alumeco has its own service center, which allows us to produce cut-to-size sheets and profiles, and foil coating is also possible. A completely unique and customized profile Aluminum is a stable and "flexible" material that can be shaped into...

BIBUS METALS GmbH is a 100% subsidiary of BIBUS AG, a family-owned company based in Switzerland. The origins of BIBUS AG date back to 1947, when the sole proprietorship Dipl.Ing. Hans Bibus was founded, and in 1974 it was renamed BIBUS AG. BIBUS METALS GmbH, on the other hand, was established in 1990 and is engaged in the storage and distribution of sheets, bars, and pipes made from nickel and...

... in our daily collaboration with banks, corporations, and large companies in the aluminum industry. NE-METALLHANDEL IN STICHPUNKTEN The key facts about our company summarized: - Over 20 years of successful experience in metal trading - Partner of international banks, corporations, and other large companies in the aluminum industry - Delivery point for the aluminum products of our partners - Your contact for aluminum semi-finished products: aluminum profiles, aluminum bars, and aluminum pipes - Aluminum strips - Aluminum sheets - Aluminum die casting...

...We supply drawn wires starting from 0.025mm in all common • materials, such as stainless steel, nickel silver, brass, bronze, copper, aluminum, etc. • special materials like tungsten, titanium, molybdenum, tantal, etc. • heating element alloys and • EDM wires Sheets/Strips/Metal Foils • stainless steel, titanium, tungsten, molybdenum, bronze, nickel silver, etc. Round Bars • stainless steel...

hpulcas GmbH, located at the foot of the Ore Mountains, has invented and implemented a new process for the production of high-purity nickel. The new material quality meets and exceeds the requirements for Ni 270. The key to the process lies in the use of high-purity cathode sheets instead of nickel powder. The high purity level results in special and reproducible properties, which are utilized in...

1972: Foundation of HERMANUSSEN Metallverarbeitung GmbH 1975: Construction of the first hall with a profiling system 1978: Construction of the second hall with three profiling systems 1992: Acquisition of HERMANUSSEN Metallverarbeitung GmbH by Jörg Lehmann 1997: New construction: Storage & shipping area 3600 sqm production & storage space including 6 profiling systems 2007: Acquisition of the enti...

As an experienced specialist in the development of textile trade fair and object decorations, we are partners for event managers, planners, architects, exhibition builders, and event technicians. With a trained eye for feasibility, we take up your concepts and develop solutions together with you that showcase your messages. We know which materials are best suited for various technical requiremen...

The two window sill systems GUNTIA®25 and GUNTIA®40 are technically advanced systems. The extruded profiles made of high-quality aluminum are available from stock in five finishes: Alu-Blank, EV1 anodized, and powder-coated in RAL 9016 - traffic white. A complete range of accessories complements the two systems. This includes an extensive color-coordinated range of aluminum fittings ...

easyFenster and easyWintergarten is a company that takes care of your needs with expertise when it comes to glass fixings. Tested glass clamping profiles for the attachment of insulating glass or triple glazing to roofs or walls. Our specialty, with a large supply program (stock items), includes various glazing profiles, laying profiles, clamping profiles, or glass support profiles for glass thick...

K. Moder GmbH was founded in August 1998 in Langenfeld and relocated to Wiesmoor in 2001 to the premises of Bohlen und Doyen. In 2009, new facilities were established in Nordloh, where pipe cuts are produced on a production area of 2000 m². The managing partner, Mr. Klaus Moder, has been involved in the industrial application of CO2 lasers since 1982, and particularly in pipe processing since 1990...

The renowned and forward-looking medium-sized company has established a solid reputation within the scrap and recycling industry of the central Neckar region. Our committed membership in professional associations and disposal communities ensures that we always apply the latest disposal techniques and are, of course, certified.