moving it Germany

...The bucket is made entirely of high-gloss polished stainless steel. The smooth surface of the stainless steel bucket makes it easy to clean. The rounded, movable handle makes it comfortable to move the bucket. The laboratory bucket is suitable for moving liquids and bulk materials properly, especially in the chemical, pharmaceutical or cosmetic industries, and in the food and animal feed industries. Material:Stainless steel (1.4301)...

...The furniture is packed, and now it's time to carry it – up and down the stairs. However, a move can be so much more relaxed with the GEDA moving lift. Because a furniture or inclined lift is not only a popular helper for transporting bulky materials on construction sites. The external lift also transports heavy furniture and boxes to and from the upper floors. With a GEDA furniture lift, movers...

...Show product variants Electronics and Universal Spray A good lubricant for all moving parts. It penetrates tight fits and eliminates squeaking noises. It undermines and dissolves rust. Keeps all moving parts running smoothly. Displaces moisture and reduces wear. Protects electrical contacts. Properties • Good penetration and wetting effect • Problem solver for rusted, gummed, or burnt-on screws...

...The preeflow flowplus16 is a media-resistant, dead-space-free miniature pressure sensor in a compact design - for moving fluids. With the dual "Luer-Lock" (male/female), it is suitable for all common dosing systems that operate with this type of thread. The sensor generates a standardized, compatible, linearized, and temperature-compensated output signal. Existing dosing systems can be easily...

...Whether it's fastening units for construction projects, household appliances, motorcycle production, or medical devices, we can deliver. Our precision turned parts are made from stainless steel, brass, copper, aluminum, titanium, POM, and more. Their durability allows you to: Extend the lifespan of your equipment. These precision turned parts are resistant to deformation from overheating and corrosion, ensuring that your machines last longer. Improve the accuracy of moving parts. With our components...

... driven in the area of the guide carriage. Therefore, it is also referred to as an Omega drive. The proven variable mounting concept allows for nearly all motors on the market and also enables subsequent changes to the motor position. Compact dimensions allow for high speeds as well as high positioning and repeat accuracy – especially when used as a vertical axis in a multi-axis system with a moving...

... of over 90 percent. The pyrometer also reliably measures when the measurement object only fills 5 percent of the measurement spot or is moving very quickly. Robust, electrically insulated measuring head and fiber optic for ambient temperatures up to 315 °C without cooling. Temperature ranges: 450 °C ... 3000 °C Spectral range: 0.8 to 1.1 µm Optical resolution (90% energy): 38:1 (1ML) / 100:1 (1MH/1MH1) Weight: 420 g Power supply: 8 - 30 V DC or USB...

...FMCW Radar Level Measurement Device for Moving and Corrosive Liquids The OPTIWAVE 7400 is a 2-wire 24 GHz FMCW radar level measurement device for liquids in harsh environments, such as tanks containing corrosive media and agitators. It is specifically designed for continuous, non-contact level measurement under extreme conditions, as found in the chemical, petrochemical, or oil and gas industries...

... ruggedness even in extreme environments. DryLin® R - Installation videos Advantages: 100 % lubricant-free Dimensionally interchangeable with (recirculating) ball bearings Large variety of choice in housing shapes Shafts, shaft blocks and accessories available from stock 8 different shaft materials Replaceable liners VA stainless steel housing available When not to use it? When little...

... that is softer than down foam and has high flexibility. It helps to take the body shape easily. The HyperSoft sponge used in quilting aims to provide a soft feeling on the skin and a velvety touch feeling. Storage space in the bed: With gas pressure dampers and lots of storage space in the bed box underneath the mattress. This means you can open and close the bed very easily. Width:160 cm Length:200 cm Lying height:67 cm Hardness:H3/medium Matratzenhöhe:30 cm Springs:Pocket springs color:black nightstand:without a bedside table...

... operate without mechanically moving parts, making it largely insensitive to shock and vibration. The pressure sensors can be configured with options according to the user's requirements, and standard types are available from stock. Special customer designs are also feasible. Areas of application: —Research and development —Test benches —Mechanical engineering —Control and monitoring of systems...

...The automatic mitre bandsaws from BEHRINGER are saws to really get things moving. Particularly when it comes to classical series production such as cutting to fixed lengths and mitre sawing in automatic mode. And also when cutting layers and packages they make a good impression. By their excellent cutting performance and short nonproductive times, your productivity can be increased significantly...

...The REA Check ER is a universal, battery-operated barcode testing device, manufactured in compliance with international standards in Germany. The REA Check ER combines a very compact and handy design with the comfort features of other REA testing devices. Its small size and construction without moving parts make it an ideal companion for mobile barcode quality control. The final statements...

...Infrared imaging and thermal profiles for industrial applications - The Raytek MP150 online scanner continuously measures the temperature of moving processes and visualizes it in the form of thermograms and thermal profiles; as part of process control and quality monitoring. — Real-time color thermograms — Scanning speed of 150 lines per second — Up to 1024 measurement points on a single line...

... tanks via gravity or pumps. ■ a scaleable filling above the fill level with a moving valve just above the fill level ■ thread-cutting, non-dripping filling valve ■ quick cleaning of the valve ■ rapid adjustment to different container sizes and changing products ■ the ideal solution for small and medium filling orders ■ filling, sealing, and palletizing by one person ■ ready to use: just connect energy (electricity and/or compressed air) and product supply, and the filling can be started...

...BEDIA intelligent tank sensor ITS 60 is used to monitor the filling levels of Diesel fuels. The sensor is able to automatically recognize what kind of Diesel fuel (Bio-Diesel, Summer-/Winter-Diesel etc.) is present and calibrates itself to it. The capacitative measurement principle permits measurement of levels without mechanically moving parts. This considerably increases stability and...

... the extended tappet oriented to the end position in the Z axis. The depth of the slot is produced by a constant X-feed moving between 0.04-0.08 mm/stroke. The speed of the spindle ranges between 400 R/min – 1,000 R/min, with one rotation corresponding to a complete stroke. This way, for instance, a feather key groove with a width of 6 mm and a depth of 5 mm is produced within 7.5 sec. (800 R/min and 0.05 mm feed/rotation). With this operation it is important that the chip can break at the end of the groove, that is that a cut-in or a bore exists.

...The Mid-Range Reader is suitable for applications that require medium reading ranges. Access controls at entrances and driveways, where cumbersome approaches to the reader are not desired, can be implemented. With a reading range of up to 35 cm, a personalized opening function can be created through wall mounting, even further away from gates and doors. It identifies moving objects with compatible transponders in the 125 kHz range.

... drying after water damage. Moving it from one place to another is easy, thanks to the directional wheels with rubber tires and handles located on both sides. Once in position, starting it is simple and convenient: unlike dehumidifiers equipped with analog controllers that use a rotary switch with minimum and maximum settings, the TTK 120 E allows you to directly enter the desired humidity level via the digital display. Technology: refrigerant Mobility: mobile Fluid: air Other features: not specified...

...Our patented desuperheater TECtemp HT V venturi cooler is suitable for applications at temperatures up to 750 °C for small pipeline nominal diameters due to non-moving parts in the steam flow. The three-part design makes it possible to bring the control unit with drive out of the high temperature range. The functional principle is based on the proven TECtemp desuperheater. The compact control...

... mechanical requirements. — Wide range for all environmental conditions, including wet/dry environments, EMC, indoor/outdoor use, different temperature ranges, etc. — Suitable for fixed connections or for cable carriers and moving parts. — Available in halogen-free versions and with international approvals.

...A Box Cooler is a water cooling system for watercraft. It consists of a bundle of U-tubes housed in a sea chest on the side of the watercraft, saving space in the engine room. The sea chest is equipped with an inlet and an outlet grille. Cooling seawater flows into the inlet grille and travels along the bundle of U-tubes to the outlet grille, cooling the water inside the tubes. The cooling effect is achieved through the forced circulation of seawater when the watercraft is moving, or by natural convection in stationary watercraft.

...For various reasons, the tire industry is increasingly moving towards insulating presses. It does not matter whether the presses are used for new tires or for retreading. Several factors play a role: - Improvement of process accuracy, - Energy savings, and - Occupational safety. The temperature management of the mold can be controlled more precisely, as not every climatic fluctuation in the...

...Unloading is not enough. Moving in is our specialty. On arrival, we unload and position your machinery using appropriate lifting technology. This ensures that everything is in the right place from the word go. SCHOLPP lifting gantries are often our first choice for safely and precisely moving equipment. Where there’s little headroom, we employ air-­cushion technology. We can move equipment into...

...One of the world’s leading industrial equipment and machinery relocation experts, AIS EURELO draws upon decades of experience from the wider AIS group to deliver best-in-class lifting and moving solutions. We have the knowledge and resources to support equipment and complete factory relocation – whether it’s to a new site or a different country entirely. No matter the scale of the task, you can...

... loads by hand. Due to its lightweight design, it can be maneuvered quickly and precisely, even at large outreaches, effectively supporting you in your daily tasks. The crane is mounted using the wall console included in the delivery. Additional mounting solutions are available for various building conditions.

...Oil brakes control the speed and time it takes for a mechanical system to move from one position to another. With their proven technology, they enhance performance across a variety of product applications. Oil brakes are typically used to control pneumatic cylinders, linear drive units, flaps, and other moving systems. The benefits of using oil brakes include: - Longer equipment lifespan – The...

... aligned in such a way that the same values are measured in the starting and end position of the carriage, i.e. that it is tensioned to form an imaginary connecting line parallel to these positions. When the wire is aligned to the bearing, the value display is set to zero. The straightness deviation can now be read directly on the display for each position when both parts of the image are fitted together by moving the microscope horizontally with the integrated micrometer spindle. Field of view:3 mm Measurement range:10 mm...

... in the lift with their goods to the desired floor. This upgrade option ease the flow of goods and people, increases the level of comfort, making transporting goods between levels much easier and more pleasant. In its standard configuration, it has a load capacity of up to 3,000 kilograms and a lifting height of up to 18 meters (with two to six stopping points). The ESCORTA lift can be...

...Drive wheels are used to drive appliances and equipment. They use the force generated by a motor within the appliance to get it moving. One area where they are currently used is in the drum systems of wind turbines. Blickle has developed a heavy duty drive roller for the wind power industry. Click here to find out more in our success story. Drive wheels use a hub keyway and key to connect the wheel to the axle. This connection is also used for hub fitting wheels. Hub fitting wheels are also used to drive machinery and vehicles. Wheel  Ø::75 - 1000 mm Load capacity:200 - 25000 kg...