Results for

Metal coatings - Manufacturer Producer - Germany

9,613 Companies

213 Products

Product recommendations

Spain

Dining Table Leg | Metal Table Leg | Steel Table Base

Bulgaria

Lithuania

Metal Forming & Powder Coating Services (PPC)

Turkey

See more products

REIMANN INDUSTRIETECHNIK GMBH

Germany

Since our company was founded in 1966, our aim has been to meet customers' needs in a sustainable way. Using thermal spraying to optimise and regenerate components is considered environmentally friendly in many ways. It significantly shortens the production chain and increases the service life of workpieces. As a result, the raw materials process, which is the most environmentally damaging part of production, is either eliminated or substantially reduced. We're also delighted to have dispensed with the complex process of transporting products from the raw material sources to the processing sites. The social and economic components can be easily reconciled, since the cost factor benefits from the slimmed-down production process, both for ourselves and for our customers. Our decades of experience enable us to further strengthen these values through the adoption of innovative approaches. As the saying goes, we live and learn! Our sales and production staff never lose sight of their goal to achieve an even more flexible, precise and sustainable way of working. In addition to our environmentally friendly approach, we also place great value on our family-friendliness, which we define through our close ties to Bavaria in Germany.

Website
HFP BANDSTAHL GMBH & CO KG

Germany

In our company, HFP Bandstahl in Bad Salzungen, we now look back on more than 100 years of experience in cold rolling and almost 150 years in the metal business. With over 250 employees, it is also our largest location. Cold-rolled steel strips in accordance with EN 10139/10140 in market standard grades, rolled to any strength class, with thicknesses between 0.20 and 2.50 mm and widths between 4 and 525 mm. Cold-rolled case-hardening steel, heat-treated steel and spring steel in accordance with EN 10132 T1-4/10140 in market standard grades, strength classes G or G + K, with thicknesses between 0.20 and 1.80 mm and widths between 10 and 370 mm. Surface finish: Normal bright annealed, custom roughened or polished as well as crack-free and non-porous, level-wound coils, stretched ultra-flat and/or degreased.

All the products for "metal coatings"

Plastic-coated metal strips

Rubber-coated metal strips

Partially coated or stripe coated metal strips

Stamped and punch-bend parts

Coil Coating

Website See all products
SPRIMAG SPRITZMASCHINENBAU GMBH & CO. KG

Germany

QUALITY MADE IN GERMANY – FOR COATING SYSTEMS WORLDWIDE. Since 1925, Sprimag has been developing systems for the functional and decorative coating of mass-produced parts and for the internal coating of metal packaging. Sprimag employs around 180 staff at its current headquarters in Kirchheim-Teck and also has sites in the USA and Mexico. As one of the few providers on the market, Sprimag develops their own application technology including spraying equipment, pumps and paint supply systems and can therefore adapt them optimally to the coating process. At the in-house application centre, Sprimag offers its customer the opportunity to test the application in every sub-process. All process steps can be carried out, from the first hand samples right through to the prototype production. Quality proudly "Made in Germany", customer satisfaction and safeguarding customer processes are our guiding principles for order fulfilment and the development of new and innovative coating and spray paint systems.

All the products for "metal coatings"

Chain-on-Edge Coating Machine

Round Table Coating Machine

Website See all products
OT OBERFLÄCHENTECHNIK GMBH & CO. KG SCHWERIN

Germany

Processing and coating of machinery and machine parts, in particular manufacturing and regeneration, as well as arranging such work. Our products include: Contracted sand blasting; Vacuum heat treatment; Turbine blades; Contracted water jet cutting; TIG welding; Ultrasonic testing; Eddy current testing; Laser cladding; Removing paint from metal parts; surface coating, oxide ceramic

Website
ORAFOL FRESNEL OPTICS GMBH

Germany

ORAFOL Fresnel Optics GmbH is a manufacturer of micro-structured polymer optics based in Apolda (Thuringia, Germany). The company was founded in 1991 and evolved into a leading specialist for polymer Fresnel lenses and similar products (e.g. fresnel prisms, diffusors and microlens arrays) in a wide range of sizes for a multitute of applications. Our components are used in industrial image processing systems, optical sensors, lighting, display technology, automotive and solar energy among others. With more than 30 years of experience we stand for the efficient realization of our customers' ideas and requirements. We offer both the production and adaption of standard products as well as the entire development of customer-specific solutions including the high volume production of microstructured optical polymer components and sub-assemblies. We possess integrated development and manufacturing skills, including optical design and tool manufacturing as well as precise polymer replication based on hot stamping and injection stamping. A wide range of finishing processes, including a variety of anti-reflective coatings and nano-structuring as well as the most cutting-edge equipment for hard coating, metal coating, printing technologies, CNC milling systems and final inspection systems complete or capabilities.

Website See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

GESCO-METALL GMBH SCHOTTENHAMML-BIEGETECHNIK

Germany

For over 30 years, GESCO-metall GmbH has stood for quality, competence and experience in the field of contract bending. The main areas of focus of our manufacturing are curved parts for windows, round windows, doors and facades, as well as complex special profiles for industrial construction, vehicle manufacturing, plant engineering and medical technology. It goes without saying that we also bend aluminium covering shells for the wood/aluminium sector. Our bending technology range is rounded off by complete curved elements, including electrolytic oxidation of aluminium, powder coating, metal fittings and glass, together with window sills and soffit cladding. For years, GESCO has manufactured portholes made of stainless steel and portholes made of aluminium. These frames are a real eye-catcher for internal and external doors, panels and facades. GESCO’s portholes are used in a wide range of facilities, such as hotels, gastronomy, airports, hospitals, nurseries, schools, etc., not just thanks to their appearance, but also due to their practicality.

See all products
SAXONIA GALVANIK GMBH

Germany

SAXONIA Galvanik is one of the leading international providers of metal-coated plastics with around 30 million galvanised polyamide parts and around 60 million single and multi-component parts each year. Many years of experience, the comprehensive process knowledge of the highly qualified employees and the use of four state-of-the-art large-scale plants guarantee outstanding results and further increase the value of the coated surfaces. In addition to daily production, SAXONIA Galvanik has also made a name for itself as a development partner. Thanks to our close cooperation with well-know customers, especially from the automotive sector, partners and institutions, the company has the potential and expertise to continue offering successful material combinations and solutions in future. With the help of over 400 employees, SAXONIA Galvanik looks after a large base of international customers.
HEINRICH VAN MEGEN KG

Germany

Heinrich van Megen KG has stood for high-quality coatings for metallic substrates since 1924. Today, the family-owned company, which is already in its third generation, produces and develops classic industrial coatings, pigment concentrates for mixing systems and corrosion protection paints as well as modern car refinish coatings for wholesalers and retailers in Kempen in the Lower Rhine region. In the industrial coatings sector, Heinrich van Megen KG works with qualified partners from the coatings wholesale trade in addition to direct sales throughout Europe. These mix "on site" with mixing systems, at short notice, any colour shade in original quality for their regional customers. The car refinish coatings are distributed exclusively by trade partners in Germany and overseas under private label. These operate completely independently on the market with their private label. To ensure the high quality and environmental standards, the company has been certified according to ISO 9001 and 14001 for many years.
JELN IMPRÄGNIERUNG GMBH

Germany

JELN GmbH develops and produces coatings for wear protection and corrosion protection as well as casting compounds for machine maintenance and the production of new machines. Our production range also encompasses impact-resistant adhesives (for attaching wear protection ceramics) and adhesives approved for food products. Our impregnation agents division includes sealers for rapid prototyping, casting and thermal spraying. Our own sealers are certified by TÜV. Jeln also offers the development of new, customized products produced in cooperation with our customers. Together with our partner companies, we offer a full maintenance service, meaning from worn parts through to ready-to-install parts. Our products include: Impregnation resins, epoxy resins, casting resins, polyurethane-based coating agents, epoxy resin adhesives, incombustible adhesives, wear-resistant non-stick coatings, impregnation agents for cast parts, metal impregnation and wear-resistant coatings
PAGOLUX INTERIEUR GMBH

Germany

Our company has been working successfully for more than 30 years in the planning, development, and production of high-quality decorative ceiling and lighting systems. Our products: Illuminated ceilings, metal coil coating, metal ceilings, metal processing, powder coating of metal parts, grid ceilings (suspended ceilings), and expanded metal ceilings.

OSSENBERG & GREFE GMBH

Germany

Our company was founded in 1864 as F. Ossenberg & Co. KG, and is now in its fifth generation of family ownership. Since the acquisition by Julius Grefe KG in 1997, we have traded under the name "Ossenberg & Grefe". We are naturally certified in accordance with ISO 9001. The original manufacturing programme for both companies consisted of buckles, rings and hooks for the textile and leather processing sector. Over time, articles for other areas of application were added to the product range. Today, alongside our standard range of products, we specialise in the manufacturing of wire-bending, punching and assembly products for more than 1000 customers from a wide variety of sectors. To this end, our 60-strong team manufacture approximately 500, 000 parts a day over a production area of 5000 m². Thanks to our versatile machining options, in-house tool manufacturing facilities and electroplating equipment, we are able to find quick and cost-effective solutions to complex challenges.

Website
HÖHE GMBH

Germany

Since 1989, Höhe GmbH has been a competent and reliable partner for industry and trade in all matters relating to sound insulation and industrial technology. The product and service range includes: Sound insulation cabins for grinding and welding work, also with integrated extraction, sound insulation enclosures for fans, aggregates, test stands and burners, mobile and permanently installed sound insulation walls, silencers for fans, supply and exhaust air systems, planning, production and assembly of individual sound insulation measures, powder coating in various qualities, sandblasting work by arrangement and laser cutting work. Our own production facilities with state-of-the-art machinery and equipment allow us to carry out our work quickly and precisely in accordance with customer requirements. Quality and adherence to delivery dates are always at the forefront. Our products and services meet or exceed current guidelines and requirements.

Website

Product recommendations

Poland

See more products

EZM EDELSTAHLZIEHEREI MARK GMBH

Germany

The EZM Edelstahlzieherei Mark manufactures drawn, sanded and polished bright steel using the cold deformation process and standard profiles and custom profiles according to customer drawings in almost all steel materials. Our high quality products usually end up being used in system and mechanical engineering, the automotive industry and in medical and energy technology. Drum dyeing machines and spring production machines from the brand Proll & Lohmann as well as heat and chemical surface treatment from the brand BAK are manufactured at EZM Edelstahlzieherei Mark's Werdohl plant. Among other things, the EZM metal working and service GmbH makes spindle bearings, straightening machines for round and profile materials with powered straightening rolls as well as custom orders. The innovative combination of heat, blasting, straightening, milling and planing processes at the EZM profile machining plant in Rohr/Thüringen represent a cost-effective alternative able to compete with traditional manufacturing technologies.

Website See all products
SYSTEC VACUUM SYSTEMS GMBH & CO. KG

Germany

With extensive experience, knowledge and expertise, the Systec Group develops sector-specific solutions, which set new standards, not least because of its exceptional manufacturing quality. The companies of the SYSTEC group provide technologies for manufacturing and processing new types of materials, processing and system technology for industry and research, and technologies for retrieval of valuable strategic raw material. SYSTEC develops and manufactures plant technology for PVD coating for high-temperature processes of up to 3000 °C and plant technology for vacuum processes.

Website
TRIBO-CHEMIE GMBH

Germany

Tribo-Chemie GmbH is your competent and reliable partner in the field of tribology. We specialise in release agents for die-casting, forging and other special applications. For 25 years, we have worked with our customers to solve technically challenging problems. New recipes using exceptional raw materials are perfected in manufacturing terms for customer use. Increasingly complex processes and component demands require not only trials carried out on our customer’s sites in the presence of technical experts, but also often the development of customer-specific solutions. Our own demands in terms of high environmental compatibility and resource preservation are outstandingly addressed by the R&D department. A motivated team ensures that everything runs like clockwork from the development phase to delivery and use by the customer. Our Graphitex® and Isolat® products for forging and die casting are impressive, thanks to improved and optimised processes available to the user. Our Graphitex® and Isolat® brands are sold worldwide.

All the products for "metal coatings"

Graphitex RS 44

Website See all products
DR.-ING. MAX SCHLÖTTER GMBH & CO. KG.

Germany

Dr.-Ing. Max Schlötter GmbH & Co.KG – Information – Schlötter is distinguished by its expertise in electroplating. More than 100 years of experience in developing electrolytes for electroplating and the associated plant technology form the basis of our success. As a company specialised in electroplating, we offer comprehensive solutions – for chemicals, plant technology or service. Chemicals: We offer tailor-made and innovative solutions for all areas of surface technology Plant technology: Individual plants and holistic solutions precisely tailored to your needs · Service: Comprehensive service for your plants and chemical products. We always see ourselves as a partner to our customers in this regard. Our goal is to offer innovative and high-performance surfaces and coatings and to provide our customers with the best possible support when developing new coating systems – from conception to implementation. Schlötter is synonymous with ecological and resource-saving customer solutions: Energy-efficient methods in order to optimise and reduce your energy consumption · Intelligent use of our resources – from reprocessing waste water to closing material cycles · Databases and a life cycle assessment software are used to visualise material cycles and to analyse environmental effects.

All the products for "metal coatings"

Decorative surfaces

Website See all products
IWM STRAHLTECHNIK GMBH

Germany

The company IWM STRAHLTECHNIK GMBH, is a Manufacturer/ Producer, which operates in the Plastic coating - steels and metals industry. It is based in Dautphetal, Germany.
ALBRECHT + SCHUMACHER OBERFLÄCHENTECHNIK A+S GMBH

Germany

The company ALBRECHT + SCHUMACHER OBERFLÄCHENTECHNIK A+S GMBH, is a Manufacturer/ Producer, which operates in the Plastic coating - steels and metals industry. It is based in Bassum, Germany.
ALPU GMBH

Germany

The company ALPU GMBH, is a Manufacturer/ Producer, which operates in the Plastic coating - steels and metals industry. It is based in Mengen, Germany.
BADER PULVERBESCHICHTUNG GMBH

Germany

The company BADER PULVERBESCHICHTUNG GMBH, is a Manufacturer/ Producer, which operates in the Plastic coating - steels and metals industry. It is based in Aalen, Germany.

NANOGATE GFO SYSTEMS GMBH

Germany

The company NANOGATE GFO SYSTEMS GMBH, is a Manufacturer/ Producer, which operates in the Steels and metals - surface treatment and coating industry. It is based in Schwäbisch Gmünd, Germany.
PICKHARDT & GERLACH GMBH & CO KG

Germany

The company PICKHARDT & GERLACH GMBH & CO KG, is a Manufacturer/ Producer, which operates in the Steels and metals - surface treatment and coating industry. It is based in Balve, Germany.
FISCHER OBERFLÄCHENTECHNIK GMBH

Germany

The company FISCHER OBERFLÄCHENTECHNIK GMBH, is a Manufacturer/ Producer, which operates in the Steels and metals - surface treatment and coating industry. It is based in Witten, Germany.
STAIGER PRÄZISIONSTECHNIK GMBH

Germany

The company STAIGER PRÄZISIONSTECHNIK GMBH, is a Manufacturer/ Producer, which operates in the Steels and metals - surface treatment and coating industry. It is based in Bösingen, Germany.
ELPOCHEM

Germany

The company ELPOCHEM, is a Manufacturer/ Producer, which operates in the Steels and metals - surface treatment and coating industry. It is based in Oberhaching, Germany.
GSO OBERFLÄCHENTECHNIK GMBH

Germany

The company GSO OBERFLÄCHENTECHNIK GMBH, is a Manufacturer/ Producer, which operates in the Steels and metals - surface treatment and coating industry. It is based in Olching, Germany.
EMIL FREI GMBH & CO. KG

Germany

The company EMIL FREI GMBH & CO. KG, is a Manufacturer/ Producer, which operates in the Plastic coating - steels and metals industry. It is based in Bräunlingen, Germany.
BÖHME-KUNSTSTOFFTECHNIK GMBH & CO. KG

Germany

The company BÖHME-KUNSTSTOFFTECHNIK GMBH & CO. KG, is a Manufacturer/ Producer, which operates in the Plastic coating - steels and metals industry. It is based in Büchen, Germany.
DICOMA COATING GMBH

Germany

The company DICOMA COATING GMBH, is a Manufacturer/ Producer, which operates in the Plastic coating - steels and metals industry. It is based in Weilheim, Germany.
HDO DRUCKGUSS- UND OBERFLÄCHENTECHNIK GMBH

Germany

The company HDO DRUCKGUSS- UND OBERFLÄCHENTECHNIK GMBH, is a Manufacturer/ Producer, which operates in the Steels and metals - surface treatment and coating industry. It is based in Paderborn, Germany.