manual rotary Germany

Sontheimer is the reliable partner for electrical switching devices. Our control switches, repair switches, main switches, and emergency stop switches are used worldwide in machinery and plant engineering. Digitalization, automation, and short product life cycles are leading to increasing demands for flexibility, efficiency, and safety for people, systems, and processes. As a reliable partner, S...

... can be carried out with maximum precision and utmost safety. In automatic mode, there is also the option to output signals for control purposes. This allows for the management of various processes. Flow rate::0.04 - 380 l/min Viscosity::max. 500,000 mPas Operating pressure::max. 200 bar Housing materials::S, PP, PVDF, Al, ETFE Available certifications::Ex, FOOD, FDA Rotary vane meter FMC 100:Flow...

...The advanced features of the ZP-10/12B Rotary Tablet Press include a digital interface and an extremely user-friendly control console. Together, they make it easy for the operator to use the machine without the need for time-consuming and cumbersome manual adjustments to bolts and screws.

... workpiece mounting 180x180x62mm 5.8kg Position accuracy +/-0.03mm @ D=109mm Maximum tilting moment 300Nm Locked torque transmission 100Nm J max. 20,000kgcm² Recommended dynamic axial load 250N – see diagram in the operating manual Static axial load 4000N @D=140 Installation position: any (four-point bearing) Quality that has been moving since 1979 Made in Germany: Germany...

...Automatic clamping takes place over disc springs, which are adjustable in the pre-loading and are solved pneumatically to the workpiece change. Manual clamping is made by a knurled knob on the opposite side of the collet. Due to the integration into the existing through-hole of the rotary table, the rotary table with the clamping system remains very compactly. Compact High run-out accuracy Easy to operate Retrofit possible...

... version; Positioner with mounting according to VDI standard Drive variants: Pneumatic rotary actuator with mounting kit according to DIN/ISO 5211; Single-acting or double-acting; Without actuator with standard mounting kit according to DIN/ISO 5211; Manual operation Nominal diameter: DN 25 - DN 300 Nominal pressure: DN25 - DN50: PN40, ANSI#300, ANSI#150; DN65 - DN100: PN25, ANSI#150; DN125...

...15 mm width, different electrical connection possibilities. Manual override optional, offered as rotary knob to be adjusted via flat-tip screwdriver or as "paddle" for the use without additional tools Function:3/2-way NC  Pressure range:2-8 bar Nominal orifice:2.6 mm Type of electric connection:Wire  Kv-value:3.2 l/min Size:15 mm Actuation type:elektrisch betätigt  Duty cycle:100 % ED...

... set dwell time is reached. The pull-out base makes it even easy to place the textile and transfer. Furthermore, a small gap underneath the base plate allows you to thread the t-shirt onto the platen. Using a small display, you can adjust temperature and a rotary know allows to set the pressure. Last, a special coating on the heated element avoids stains. With a range of different base platens, this press can be used for t-shirts, hoodies, bags, sleeves, legs, bags, neck tags and a lot more.

... integrated rotary slip clutch reliably prevents the screw from being overtightened. Key Features: Accuracy acc. EN ISO 6789 type II class D Micrometer adjustable Clockwise direction Rotary clutch mechanism ('Cam-Over') Hex bit insert E 6.3 (1/4 inch) Scope of Supply: Torque Screwdriver RTD Resin grip for model 120CN and 260CN Calibration Certificate (ISO/JIS) Original user manual (jap./eng.) ...

...Large selection of manual directional control valves with different actuating elements. With lever at 90° / 45° or on the front. With adapter system for mushroom buttons, push buttons or rotary switches. Available in sizes 1/8 and 1/4 to 3/2, 5/2 and 5/3.

...The filling machine FM1 is suitable for the manual filling of liquids to highly viscous media into various containers for small volumes. The machine can be delivered as a tabletop model or as an OEM version, equipped with either a check valve or a rotary slide. The pneumatically driven piston dispenser is made of stainless steel and complies with GMP standards. Both variants are available with...

...Rubberized universal handle for all hand sizes. Perfect housing geometry. Maximum comfort with a rotary trigger requiring very little force / short trigger travel. Individual return setting: When using manual return, the trigger must be pressed until the rivet breaks. After releasing the trigger, the device returns to the front starting position. — L-Boxx: Robust and flexible. The innovative system...

...and chemicals, where a reliable and fully automated packaging process is required. The automatic rotary arm wrapper is designed for continuous operation and provides high packaging efficiency, which can be further optimized through precisely adjustable parameters such as film tension, wrapping speed, and number of film layers. The machine operates fully automatically and requires no manual...

...Dare to do the impossible! The innovative DKE01 adjustment button combines an optionally programmable electronic position indicator with a star handle or a manual disc wheel, featuring a flexibly usable positioning unit. The indication values can be parameterized based on the application, allowing the same basic device to cover a wide range of work scenarios. Rotary button with integrated LCD...

...This tailstock type 11-1 has a center height of 380 mm. The spindle has a diameter of 100 mm and a Morse taper MK 6. The tailstock is mounted on a milling machine opposite a rotary table. Center height: 380 mm Maximum workpiece weight: 2000 kg...

... energies and aerospace. Here you can find a selection of the implemented assembly system types: - Robot solutions - Interlinked systems - Fully automated lines - Rotary transfer machines - Manual workstations - Hybrid systems An in-house development from our company is the VARIOMODUL®, which allows your system to be quickly adapted to dynamic market changes. Standardized modules, processes, handling technology and peripherals are used. For further information please refer to the corresponding download.

...stable granite and iron cast stand with manual z-adjustment high performance stepper motion controller with joystick and serial interface XY Stage GT8, Rotary Stage RT5, Wafer-Chuck WC6 precise xy stage GT8 with 200 x 200 mm stroke rotary stage RT5 with high round- and flat runout below 5 µm wafer-chuck WC6 for 4-12" wafer wafer-chuck with vacuum-fixture for 12", 10", 8", 6" and 4" wafer...

...Max. Pulling Force: ZH2200 2200 kg, ZH3000 3000 kg Manual clutch of the rope drum Rotary piston motor with worm gear in oil bath running gear Working pressure: 130 Bar Weight without rope: Standard drum: 26 kg, Long drum: 29 kg...

...Laser welding system for manually guided welding processes, optionally expandable with a rotary axis and vision system. Manual laser welding system with a stable working frame for processing small series and individual pieces: - Compact design - Sturdy housing - 4-axis system and swivel device - Easy handling - Manual processing via interventions and a binocular...

...The hand control HST1.3 is the ideal solution for the manual control of OLIGO surface controls optics and DALI controllable light sources. Equipped with a user-friendly rotary dimmer and a large, easy-to-read scale, the HST1.3 allows for precise control of all common surface control optics. The DALI dimming signal is broadcast to all connected lights. A maximum of 128 LED drivers can be dimmed with the HST1.3. This control is not suitable for Tunable White light sources.

... adjuster the first choice when durability with consistent quality is of particular importance. MEGATRON customizes the rotary encoders upon customer request. Type: incremental, with detents, with button Technology: optical Mounting: solid shaft, panel mount Output signal: incremental Protection level: IP40, IP65 Additional features: compact, high-resolution, manual adjustments...

... Optionally, the system can also be equipped with a motorized rotary axis and can thus also be used for very demanding tasks where precision and reliability are the critical factors.. Weight:125 kg Dimensions:530 x 1240 x 994 mm...

...In the TP 4000 E model of the Lagopredos® series, the speed is manually adjusted via a rotary potentiometer. It features an on/off switch. Direction of rotation can be changed. Additionally, the pump is equipped with a preselection switch for manual or external control.

...Manual Sack Discharger: Standard Version Feed Hood with Dust Filter Feed Grating: 30 x 30mm Mesh Size Feed Height: 800mm Hopper with Outlet: Diameter 273 mm Continuation: Dosing Screw Rotary Valve ... Normal Steel...

... made of aluminum and lightweight metal alloys * Very clean cut thanks to high speed, even with thin-walled profiles * Manual version * Stable and robust construction * Easy and trouble-free operation * Precise cut * Swiveling saw head 45° to the left and 45° to the right with a clearly readable scale * Lockable positioning pin at 45° * Tiltable saw head 45° to the left for miter cuts * Bearing-mounted rotary table ... Saw blade: Ø 400 mm Max. vise opening: 220 mm Infeed height with frame: 855 mm Motor power (2-stage): 2.2 kW Speed: 3000 rpm Mains voltage: 400 V Fuse: 16 A Weight: 160 kg...

... the handwheel. Automatic object retraction. • Vertical stroke: 70 mm - Horizontal stroke: 40 mm • Object retraction 80 µm on return • Manual trimming device in 3 stages: 10, 20, and 30 µm • Integrated cut counter with LCD display and reset...

... been involved in: - Electric high-performance gear components (up to 6 kV) - Electric central locking systems (vehicles) Workpiece carrier circulation systems:Horizontal and vertical Integration in-feed devices:Yes Integration in workpiece carrier changing systems:Yes Rotary systems:Electromechanical drive / pneumatic systems / cam mechanisms Linear systems:Electromechanical drive / pneumatic...

... ranging from 110 to 1,200 liters. Optimal sizing for large parts The flat bottom of the tank and the large opening between the tank bottom and the separation flap allow you to easily process your fragile and large components. Additionally, the CD circular vibrators feature a generously sized separation zone that ensures easy separation of flat parts. Technology: Trowalization, deburring, sanding, smoothing Application: For machine construction, aerospace industry Other features: Rotary vibrator for surface treatment...

... quick and easy adjustment of the character combination for each embossing wheel. up to approx. 25 mm outer diameter Font size 1.5 - 2.3 mm - max. 10 embossing wheels 2.5 - 4.0 mm - max. 7 embossing wheels manual release Dimensions 230 x 70 x 290 mm Weight approx. 1.4 kg...

...) Generator: 40/100 kHz - 0-100 W // 13.56 MHz - 0-200 W // 2.45 GHz - 0-150 W Electrodes: The electrode is outside the vacuum chamber Control: Manual, rotary switch, basic PC control (Windows CE) Power supply: 230 V / 50 - 60 Hz Vacuum pump: Suction capacity approx. 3 m3/h...