high-temperature seals Germany

...Hose packs consist of braided textile hoses filled with high-temperature resistant and highly insulating fibers. Hose packs have excellent dimensional stability and are ideally suited as seals in high-temperature applications, such as large boilers, access hatches, tunnel openings, or melting furnaces. Material Specification: E-glass fiber Application Temperature: up to 550°C Application Limit Temperature: approx. 600°C Standard Diameter: 8 - 120 mm (other dimensions available upon request) Design: round braided Reinforcements: optionally with steel wire in the cover Packaging: roll goods...

... conductivity. SILCAFELT is very easy to process, cut, and punch. Typical applications include high-temperature seals, backing insulation for liquid metal transport, and expansion joints in refractory construction. Note For information on safety precautions when handling and using aluminum silicate wool, as well as health hazards, please refer to our EU Safety Data Sheet.

...High Temperature - Packaging Packing for stuffing boxes, e.g., as oven door seals and generally where high temperatures occur. Rectangular Braided Graphitized Special requirements Available as bulk material or cut to length.

...High-temperature resistant parts made of mica, Kerafix®2000, ROKU Fill ®...

...Precision O-rings and packings, radial shaft seals and sliding ring seals, flat and standard seals, asbestos-free and graphite packings, high-pressure and high-temperature seals, silicone sealants.

... production volume are increased. This is accomplished by numerous details such as innovative aluminium outer housings for better heat dissipation, improved high temperature seals (up to approx. 107°C), a diaphragm accumulator for faster cycle times and a larger damper chamber which is filled with food-grade oil. All of this significantly contributes to reduced wear and extended service life. These...

...Each expansion joint is tailor made. Layers of material are assembled on a frame which conforms exactly to the required profile. Bellows type expansion joints incl. or without reinforcing rings/frames. Diaphragms Expansion joints for varying cross sections and transitions. Construction from round to rectangular Construction according to drawings Non-standard high temperature seals Compound movement...

...Needled lightweight mats made from high-temperature ceramic fibers for a wide range of thermal insulation applications. These products do not emit harmful fumes during initial heating. General properties: High tensile strength, Low shrinkage, Low thermal conductivity, Low heat storage capacity, Good sound absorption, High heat radiation Typical applications: Furnace insulation, High-temperature seals, Fireplace linings, Glass tank insulation, External insulation of molds...

...BIO-Fiber (DELVOSIL) 1,200 °C (classification temperature) Ceramic Fiber (KAPOFLEX) 1,260 °C (classification temperature) Typical Applications: High-temperature seals, mold lining, heat protection lining, and silencers Insulation for: the automotive industry, back insulation in liquid metal distribution channels, filler material for expansion joints, insulation for induction furnaces Rolls in 1000 mm width as well as other thicknesses are available upon request as custom dimensions.

...Lubrication of rolling and friction bearings, joints, linear drives, guides For the lubrication of fittings, seals, moulded parts and elements of elastic rubber materials in the hot- and cold-water segment Advantages and benefits NSF H1 registered Can be used universally due to good high-temperature properties, long-term lubricating effect and good adhesive strength on metal surfaces Resistant to...

...The sealing solutions for high-pressure cleaners from Kastaş are crucial for efficiency and safety in the cleaning industry. Our seals are specifically designed to withstand the high pressure and temperature conditions that are common in high-pressure cleaners. They provide a reliable seal that prevents the leakage of water and cleaning agents, thereby optimizing the performance of your machines...

...Our O-rings made from FFKM were produced in a clean room. The O-rings were developed by Interseal under the name Novelast® (a high-quality perfluoroelastomer range).

...The range in the graphite seals segment is not limited to rings and tapes, but also includes sheets: The many advantages of billi graphite sheets include the low permeability of liquids and gases as well as high resistance to chemical substances. In addition, the plates made of natural graphite convince for their enormous stability and high resistance to temperature fluctuations. The graphite...

...In the high-temperature version, all plastic parts and seals are suitable for processing hot melt adhesives at temperatures up to 250 °C. This hand gun is particularly effective for processing polyamides. Particularly robust / temperature-resistant housing Even wider processing range for hot melt adhesives Process reliability through continuously adjustable temperature control +/- 1...

...Continuous service temperature up to 260 °C Excellent chemical resistance Outstanding sliding/friction properties Polytetrafluoroethylene (PTFE) The high-performance plastic PTFE has a high density. In addition to good mechanical and electrical properties, it offers outstanding thermal characteristics. For example, the maximum continuous service temperature is 260 °C. Furthermore, the material...

...The bearing assemblies are equipped with the S10 boot seal as standard. Temperature: –30 ° C to +80 ° C (NBR). Max. Peripheral speed: 5 m / s. For the sealing of the construction (e.g. when using a bearing element) the seal can be ordered by the meter. The joint is then glued with Loctite 401® adhesive. Special seals are available on request. Franke offers Viton seals for high temperatures or aggressive media. Temperature:-30 ° C to +80 ° C (NBR) Max. Peripheral speed:5 m / s...

... oils of the ELKALUB series LFC 34000 offer excellent corrosion protection and high compatibility with NBR seals. These oils are compatible with mineral and paraffinic oils as well as synthetic hydrocarbons. To maintain H1 approval status, there must be no mixing with other oils. The main applications are in the areas of gear and circulation lubrication, as well as chain lubrication. The temperature range is between -15 °C (-10 °C) and +120 °C.

... aluminum foundries, seals in blast furnaces, expansion joints, pipe and catalyst insulation, repair work in high-temperature areas. Operating temperature, °C: 1,400 °C Density, kg/m³: from 150 to 600 Mechanical properties: from rigid to elastic, according to specifications Strength: Strength of rigid products up to 20 MPa Chemical composition, %: CaO: 30.0-40.0; MgO: 1.0-5.5; Al2O3 ≤ 0.5; ZrO2: 0.1-1.5; SiO2: 65-75 Thermal conductivity, W/m∙K at material density of approx. 300 kg/m³: 600 °C 0.11; 800 °C 0.15; 1,000 °C 0.20; 1,200 °C 0.29; 1,400 °C 0.35...

... and covers the flow range from 0.19 ml/min to 1152 ml/min. The mzr-11508 is suitable for continuous delivery and discrete dosage of low and high viscosity liquids. It achieves high differential pressures and provides a low pulsation flow. Its robustness and the available accessories make it suitable for challenging applications. Advantages High dosage precision precision CV < 1% at low volumes Long...

... particularly well-suited for sealing steel flanges and steel enamel flanges under high pressure and temperature conditions. ✔ Specifications according to EN 13555 ✔ TA Luft according to VDI 2440 ✔ Fire Safe according to ISO 10497 / API 607 ✔ Blowout Test according to VDI 2200 ✔ BAM for oxygen applications Country of origin: Germany...

...In the manufacturing of hoses, plastic mandrels are used. The hose is built up layer by layer around them. After curing or vulcanizing the hose, the mandrel is removed. To produce a high-quality end product, the mandrel must be flexible, temperature-resistant, and free of voids. Only then can it be ensured that the finished hose has the desired shape. The plastic mandrels for the production of hose cores are made from a temperature-resistant and flexible plastic that meets your production requirements.

...WKSB Isolierungen GmbH plans and implements all types of thermal insulation. You benefit from our expertise and many years of execution competence. Whether it concerns legal requirements for insulation against heat loss in industrial plants in the normal temperature range or specific demands for high-temperature insulation. We will find the best possible technical solution for you or with you for energy-efficient and plant-optimized thermal insulation. We specialize in developing and implementing customized solutions for your projects.

...We seal your housings, control cabinets or lighting units, apply adhesives or cast electronic components. In addition to the proven, high-performance 2-component PUR seals (FIPFG), we cover other important areas of application for our customers by applying homogeneous 1-component seals. For example, if your application requires higher temperature and/or chemical resistance or may be less...

... bar (reference medium approx. 10 mPas at 20°C) Medium-contacted parts: HD-POM / stainless steel / VisChem Seals: high molecular PE, VisChem Static seals: O-ring VisChem Motor: 18 to 24 V DC, incremental encoder, planetary gearbox Operating conditions: +10°C to +40°C (Ta.), air pressure 1 bar Medium temperature: +10°C to +40°C Storage conditions: dry / dust-free -10°C to +40°C Dosing volume, approx. per revolution: 0.03 ml/rev Dosing accuracy: ± 1% Repeatability: > 99% Minimum dosing amount: 0.002 ml Volume flow: 0.2 to 3.3 ml/min...

...PTFE (Polytetrafluoroethylene) is considered a high-performance plastic, offering good temperature stability and very high chemical resistance. PTFE (Polytetrafluoroethylene) has one of the lowest coefficients of friction of all comparable plastics. Due to the very wide temperature stability of PTFE, its thermal properties can be described as "top-notch." Another characteristic is the extremely high durability of the material. Furthermore, seals made from PTFE require low surface pressure to achieve the desired leakage rate, as they are very adaptable yet tough.

...Do you need labels to identify your goods that have to withstand extreme heat or cold and / or are resistant to chemical and mechanical influences? Or do you need labels that fulfil technical functions? Förster Etiketten produces high-performance labels for you in specialized printing processes using exceptional materials and adhesives. Intelligent design and a capable selection of materials and adhesives produce all-rounders that perform important functions or even basic labeling requirements even under the toughest conditions...

... thermostat valves and control mechanisms due to contaminated cooling components and control parts, high engine temperatures caused by barriers to heat exchange. Application: Add the contents of the can to the coolant. Turn on the heating. Let the engine run for about 30 minutes at operating temperature. Drain the coolant and thoroughly flush the system. Fill in new coolant according to operating instructions. Container: Plastic drum Country of Origin: Germany Content: 200 liters...

... surfaces, including non-machined ones. Compact Rail linear guides feature a robust steel slider with ball bearings, self-centering heads with wipers, longitudinal seals to protect the internal components and a top sealing strip. The slider body is accurately finished with matte longitudinal edge chamfer and a shining ground flat surface. The slider heads are equipped with special slow release...

... Coefficient of friction only 10% higher than in iglidur® J Coefficients of friction identically exceptional like iglidur® J Reduced installation space as well as easy and simple mounting Realizable with numerous sealing types High-temperature option VDSM possible Temperatures till 150° C Material: iglidur® J High temperature option VATM, iglidur® V400 Seal ring made of fluorelastomer Bearing-sealing...

...The first choice for applications in the chemical and petrochemical industry. The combination of high pressure/high temperature (P x T) and low cold flow far exceeds the properties of conventional PTFE.