high-current connectors Germany

...A special probe design allows contacting with very high currents and very low contact resistances. Additional functions like temperature sensors or sense pins can be integrated, even at limited space.

...The connectors are available in standard or high density configurations with the familiar pin counts. Housing material: Tin-plated brass, stainless steel Pin count Standard: 9-, 15-, 25-, 37-, 50-pin Pin count High Density: 15-, 26-, 44-, 62-, 78-pin Connection type: Straight/angled solder pin, solder cup Current carrying capacity Standard: up to 7.5 A Current carrying capacity High Density: up to 3 A Quality level: 1-3...

...High Current Contact System for the Anodizing, Electroplating, and PCB Technology Industries Execution Type Performance Range High Current Contact Systems from 250-12,000 A Quick-Release Contact Heads 1,000 + 2,000 A Plastic Support Blocks 250-12,000 A Your Advantages: - Long lifespan due to cast design - No control elements - Contact pressure is proportional to the load weight - No heat generation -> very low power loss - Suitable for fully automated systems A DEVELOPMENT FROM PRACTICE FOR PRACTICE, TRIED AND TESTED FOR DECADES!!

Fischer Elektronik, founded in 1968, is the leading European provider of mechanical accessories for the electrical and electronics industry. At the headquarters in Lüdenscheid, North Rhine-Westphalia, more than 400 employees work in administration and production on a company site of over 28,000 m2 under optimal technical conditions. The number of standard items, taking into account various produc...

... CONTA-CONNECT product portfolio is further complemented by a wide range of installation materials, such as wiring ducts, tools, or mounting rails, as well as suitable terminal block accessories like end supports, crimp terminals, or connectors. For more information about our extensive product portfolio, please visit: https://conta-clip.de/de/produkte/verbindungstechnik Height (mm) with TS 35/7.5: 61 Width (mm): 32 Length (mm): 132 Rated cross-section: 70 Rated voltage: 1000 Rated current: 192 Rated impulse voltage: 8 Flammability classification: V-0 Connections: 2 Material: Polyamide 6.6...

...Through an improved 4P design, nominal currents of up to 13A are now possible. To meet the increasing demand for fast charging times in power-intensive applications while also addressing the high requirements for miniaturization, the proven 4P design has been continuously developed and enhanced. As a result, nominal currents of up to 13A can now be achieved. These miniature high-current...

...Switch contacts for interrupting high voltage. Hybrid design: A tungsten-copper tip is permanently bonded to a copper body. High wear resistance & high conductivity. Tungsten or tungsten-copper contacts are used as high current, high voltage, or interrupting contacts (e.g., tulip contacts). Depending on the composition or proportions of tungsten and copper, conductivity, wear resistance, and hardness can be varied. Soldered copper/tungsten-copper composite contacts are also available. WCu electrodes are also used as welding electrodes and for electrical discharge machining (EDM).

...STOL®78 is a CuMg alloy for connectors in automotive, electrical and electronic applications. Thanks to the combination of high electrical conductivity with high strength and good relaxation resistance, this alloy is particularly suitable for relays, current carrying springs, bus bars and fuse boxes with resilient functions.

... 40 ISO-KF Voltage:100 Current:250/1500 (1) Tightness:1 x 10 -9 Pressure (absolute):1 x 10 -8 mbar ... 2.5 bar (max. 10 bar with external centering ring) Bakeout temperature:110 Housing:aluminum 6082 Insulator:thermoplast and thermoset Seal:FPM...

...high contact density, space-saving, crimp connection Connection technology: Crimp Rated current: 10 A Rated voltage: 250 V Rated surge voltage: 2.5 kV Degree of pollution: 2 (3 in enclosures with IP54 and higher)...

...• only 8 mm wide for combination with special connectors for tool-free connection of the strips without soldering, including strain relief • despite the low number of LEDs and large LED spacing, very good light output due to higher current • larger LED chip (5630), with flat height and integrated heat dissipation, enables efficient thermal management • long lifespan due to constant current driver...

... metric M12(17) connector, which is directly integrated into the rear part of the motor housing. The advantage of this design is that the motor housing achieves an IP65 protection rating. Additionally, the encoder also features a metric M12(17) connector, which is integrated within the motor housing. Thus, the two connectors are located side by side at the rear of the motor. Size: NEMA 23 / Flange dimension 56 mm Protection class: Motor housing IP65 (Shaft sealing IP52) Holding torque: 2.00 Nm Rated current: 4.20 A Motor connections: Metric M12 connectors...

...Connectors are used to separate and connect lines (for electrical current or, for example, optical radiation, generally technical media). In the connector sector, there are high demands to ensure a low resistance when current flows. Connection points are potential problem areas. Therefore, we pay special attention to the quality of the strictly selected materials, usually in brass or copper...

... strands cross over each other, a tight cohesion of the braid is maintained even under static or dynamic loads. The strands of the copper strips FCB are either crimped with copper sleeves under high pressure or press-welded at the connection surfaces. Cross-section 10 - 50 mm²: Special designs available upon request With insulation in silicone or PVC: Current load 65 - 222 A Single wires 0.15 - 0.20 mm: Connections press-welded Connections crimped with Cu sleeves: Other connection variants available upon request Hole center distance 100 - 300 mm: Hole Ø 6.5 - 10.5 mm...

...Special connectors with high-quality, solid turned contacts and rubber-mounted waterproof contact inserts. Schaltbau connectors of the SB series are specifically designed for use in rail vehicles, where extremely harsh environmental conditions must be reliably managed in daily operations. Equipped with silver-plated or gold-plated contacts in rubber-mounted contact inserts, SB connectors are...

...Contacts with lamella technology. - Current carrying capacity up to 2,400 Amperes - > 10,000 mating cycles - High vibration resistance - Low contact resistance - Automated lamella assembly - High contact reliability - Temperature resistance of ODU LAMTAC® up to 150°C - Including cable assembly...

... - vertical - Tape on Reel: for automatic assembly (Reflow), connection direction conductor/board: 0°, rated current 17.5 A, rated voltage 250 V, minimum conductor 0.5 mm² - maximum 2.5 mm² AK(Z)350 - vertical - high current variant: Connection direction conductor/board: 0°, rated current 24 A, rated voltage 250 V, minimum conductor 0.5 mm² - maximum 2.5 mm² AK(Z)350 - horizontal - high current...

...• Highest quality plug contacts for signal and high current connections • Custom adaptations possible • Compatible / interchangeable with products from other manufacturers • Various base materials, e.g. copper beryllium, rust and acid-resistant stainless steel, hard copper alloys, or according to your specifications • Diverse surfaces: silver-plated, nickel-plated, gold-plated, tin-plated, or according to your specifications • Delivery forms as strip goods, strip sections, rounded contacts • Leaf spring technology • Torsion spring technology...

... easy and seamless connection. High current transmission values of up to 16A continuous load at a voltage of 630V AC/DC open up a wide range of applications. In combination with our X-TEC 15 connector, we have created the M15 Power, an ideal plug-cable combination that impresses not only with its performance but also with its extensive range of applications.

... potentiometer 10 kΩ; voltage signal 0 – 10 V; current signal 0 – 20 mA or 4 – 20 mA Status LED: green; fault: red Output "Fault Out": connected to GND; as input: low 0...0.5 V / high 4 V...UB Protection class: IP 20 Operating temperature range: 0 … +50 °C (+32 … +122 °F) Dimensions (L x W x H): approx. 100 x 92 x 35 mm Weight: approx. 125 g Remarks: Subject to technical changes.

...%. With the APS DS3 or DS3-L version, solar modules with a maximum power of over 1000 Wp can be used particularly cost-effectively. The module inverter converts the direct current generated by the solar module directly into grid-compliant alternating current. For this purpose, the DS3 is connected directly to the household power grid on the AC side. On the DC side, a maximum of two solar modules can be connected directly to the DS3-S using pre-assembled MC4 connectors.

...decentralized signal acquisition, robust and precise. µCAN-Transmitter Series: Protection class IP 67, space-saving integration directly in the measurement line of temperature and strain gauge sensors. µCAN-OEM Series: CAN bus connection directly in the sensor housing, equipped with a high-speed CAN interface that supports CAN 2.0A and CAN 2.0B. Analog Acquisition: Temperature, pressure, current, voltage Digital Acquisition: Input and output Bus System: CAN, CAN FD Protocols: CANopen, CANopen FD, J1939...

...2-pole grinding cable for preferably straight track layout with minimal installation space. Important Features • quick and secure installation due to few components • defined connection point through plug-cut connectors • compact design • easily extendable in length and number of poles • high strength due to 2-pole design and hollow chamber structure • available as 2 x phase and phase + PE...

...For the transmission of higher currents or for more demanding applications, druseidt offers various options for current transmission using connectors. High-current connectors are electrical connections that must not be plugged or disconnected under load when used as intended. All plugging operations must be performed without load. Within these connectors, current transmission occurs via a...

...The secure connection for your wire-to-board or wire-to-wire solution: Our crimp, IDC, or foil connectors ensure high flexibility in positioning on the circuit boards. Connections over long distances, taking into account your technical requirements such as current flow, data flow, etc., are also easily achievable.

...Discover the versatility of our plugs for reliable power connections. With precise manufacturing and high-quality materials, our plugs provide a secure solution for a wide range of applications. The easy installation and robust design ensure a stable connection. Our plugs are durable and resistant to environmental influences. Thanks to high conductivity, the current flows efficiently. They...

...The synchronous servo motors of the MN series are brushless permanent magnet synchronous motors with sinusoidal back EMF and feature neodymium permanent magnets in the rotor. They are particularly suitable for high-quality servo applications, such as positioning tasks that demand the highest standards of dynamics and accuracy. Standard version 2-pole resolver feedback Flange connectors...

...Connection box 5-pole with bus for flat cable Woertz Combi Connection box with screw connection for feeding or branching for high current - 5G2.5mm² and bus - 2x1.5 mm² Poles: 5G2.5 + 2x1.5 mm² Unit: piece Eldas - No.: 150 775 137 Flat cable - contact type: piercing contact (screw) Protection class: IP 20...

...Silicone Reducer Connector High-Quality Silicone Hose Connectors With the reducer connectors from Technikplaza, two hoses can be easily connected. The liquid is gradually transported through them. This is particularly useful if you want to extend your current hose. Technical Information: - Wall thickness: 4.5 mm - with polyester inserts - Maximum working pressure: 5.8 kg/cm² - Burst pressure...

...Earthing straps, current leads and connectors with different constructions - Flexible copper connectors for earthing straps, current leads and connectors with different constructions regarding customer specification. As prematerial for our customised connectors a lot of different materials can be used, mostly high flexible strands and braids made from Cu-ETP1 and Cu-OF1, LEONI Histral® alloys...