guide bearings Germany

... bearings Raceways:Spring steel, standard Stroke lengt:One piece from 200 mm to 4000 mm, endlessly connectable Material:Cassette plate, roller shoes Rail body:aluminum, anodized Raceways:spring steel Rollers:bearing steel Operating temperature:-20 °C to +80 °C Maximum speed:10 m/s Maximum acceleration:100 m/s2 Mounting position:Any Lubrication:Lifetime-lubricated, maintenance-free...

...Compact Rail is a system of linear guide rails with induction-hardened raceways and high-precision runners equipped with radial ball bearings, also made of hardened steel. Thanks to their self-aligning capability, Compact Rail linear guides simplify design, enhance performance, and reduce overall application costs. The linear guides of the Compact Rail series can be easily mounted on all surfaces...

...The use of high-precision radial groove ball bearings is especially recommended when axial forces are supported in two directions, but the installation space makes the use of a spindle bearing pair impossible; plus when the best-possible guide for rotating components is needed, but the RPM requirements are less important. Depending upon the load capability and the installation space available...

...The compact, guided cylinder CC is a linear drive with a lot of power and minimal dimensions. Generously dimensioned guide rods on plain bearings or ball bearings open up a wide range of application options in variable positioning with and without sensor queries.

...), stainless steel (hardened)\nLoad ball: Tool steel (hardened), stainless steel (hardened), plastic\n\nOperating Conditions\nTemperature range from -30°C to +70°C\nConveying speed up to 1.5 m/s.\nDynamic load ratings up to a maximum of 50 kg.\n\nThe MINI ball roller is suitable for:\n\n- Use in measuring instruments\n- Transporting materials in clean rooms\n- Guides for small linear bearings"}...

... workpiece - Excellent damping for the best surface quality, high geometric accuracy, and high cutting forces - Wear-free hydrostatic bearings ensure the highest grinding quality - High load capacity and stiffness thanks to highly rigid hydrostatic bearings using PM controllers - Available with belt drive or torque motor...

... DryLin® R shaft end supports and shaft blocks Shafts and supported shafts Shafts made of aluminum, steel and carbon fiber DryLin® shafts and supported shafts Linear round guide DryLin® R linear plain bearings are based on extremely wear-resistant polymers specially developed for the linear technology. The dimensions are compatible with standard ball bearings. The special geometry guarantees...

... medium, higher carrying forces can be achieved with the same size and better damping properties. Various designs are available, which can be customized at any time to meet special requirements in terms of installation space, load capacity, guide length / table diameter, drive type, position measuring system, etc.

...The guide vanes control the inflow of water in turbines. These vanes run in sliding bearings. To give the bearings longer term protection from water infiltration, the inner sealing MANOY® system seal WP, type 428, was developed for standard specifications. Type 487 with integral scraper was designed for high specifications due to abrasive constituents in the water and/or long inspection intervals. The housing for this seal must be open. The profile dimensions of both versions can be customized to adapt to existing groove designs.

...Guides and support bearings for accommodating axial and radial expansions of pipelines. MEFA offers guides and support bearings for accommodating axial and radial expansions of pipelines. For suspended, vertical, and lateral pipeline supports, a variety of solutions with coordinated sliding paths can be implemented. Due to their low rolling resistance, roller bearings are suitable for minimal force transmission into the substructure.

... ball bearings with seals on both sides should be greased before installation. The specified load ratings apply when using hardened and ground shafts. Accessories: Precision guide shafts 21595. Mounting screws 07160. Order Number: 21518-1202 D: 12 D1: 22 D2: 42 D3: 32 D4: 4.5 D5: 7.5 L: 32 L1: 6 T: 4.1 Dynamic load ratings N: 520 Static load ratings N: 790...

... grey cast iron (GG 25) or of aluminium. Aluminium models are anodized black. Slides for higher loads can be delivered as reinforced execution. The Föhrenbach slide types that run on roller bearings run in prestressed, hardened and ground Vee-guides. Even under high loads they assure smooth running operation, free from play and guarantee an extremely precise lengthwise motion. As compared to guide rails (dovetail type) they enable exact and easy displacement of parts, free from play.

... service life. The use of this guide ring simplifies the design of the cylinder head. Easy mounting possible in closed and undercut installation spaces. Material:Compound plastic-fiber reinforcement with lubricant additives MAINTENANCE:Maintenance-free Pressure resistance:≤ 340 N/mm² spec. dynamic load capacity:≤ 100 N/mm² spec. static load capacity:≤ 50 N/mm² Sliding speed:≤ 2 m/s Temperature...

... in the barrel pump and significantly increases service life. The barrel pump is available in stainless steel, polypropylene, and polyvinylidene fluoride. In the stainless steel version, the F/FP 424 can also be used in explosive areas. Advantages: - No seal wear - Optimal emptying of the inner tube - High service life - Low wear on guide bearing and shaft - Long lifespan of the bearings...

... lubrication of rolling and sliding bearings with ELKALUB GLS 37/N1 is conditionally possible. This is a special product that can be individually produced for you upon request. Minimum order quantities may apply. Just contact us.

... fixation. • Side guide rollers and adjustable clamps ensure optimal pipe holding. Quality & safety. • German quality steel blade. • Motor brake. • Protective cover. Type: stationary Technology: circular Material processed: unspecified Applications: for flexible pipes Other features: automatic, table-mounted...

...Polyethylene (PE), Polyoxymethylene (POM), Polyacetal: Technical plastics for use as mechanical components, including sliding bearings and guide rails.

...Sliding bearings, like rolling bearings, serve to support or guide moving parts relative to each other. They must absorb and transmit the forces that occur. However, while in rolling bearings the bearing elements are separated by rolling parts – the rolling bodies – in sliding bearings, the moving component – usually a shaft, a pin, or a strip – glides on the sliding surface of a stationary...

...The miniaturized fine adjustment elements of the B20 series are continuing the concept of the guide boxes B40: Precise dovetail bearings, hand and motorized movement and varios posibilities of assembly with raster plates and angles.

... bearings. The guide rings mounted in the roller bearings keep the bars in the centre of the SamSpindle cartridge. Thanks to this technique, round or test bars can be rotated at high speed, ensuring remarkably smooth running. You can turn drawn, round or profile bars, with correct straightness, at the maximum spindle speed of the lathe. This allows us to guarantee workpieces with high precision...

...By combining the basic profiles, this construction form is achieved, resulting in a double-T profile. High rigidity and excellent radial load capacities characterize this series. The possible stroke of the movable guide rail is greater than the closed length of the telescope. For mounting, the runners can be supplied with threaded holes, countersunk holes, or a combination of both.

...All of our available rolls can be delivered directly from our warehouse on short notice: - Highly developed sealing system - Quality ball bearings optimized for support rollers - Low axial play - Standard 2K-PUR coatings - Made in Germany - Quality components from certified suppliers...

...Carl Hirschmann is the leading manufacturer in sliding bearing technology with advanced engineering. Project-related research and development, proprietary testing procedures, and a high level of manufacturing depth are all available from a single source. The standard range already covers a wide spectrum: maintenance-free bearings, aluminum-titanium lightweight bearings, support joints, guide...

...torsion-free components that ensure smooth longitudinal and rotational movements. Compared to conventional ball bushings with rotary bearings, the rotational ball bushing has significantly more compact dimensions. Applications can be found in machine tools, transport equipment, and the semiconductor industry.

...Positive action training frames in all configurations Side guide rollers orientate the frame and help ensure the belt tracks centrally on the conveyor Dimensions: Available in all configurations for both carry and return frames Positive action helps keep the belt aligned with the center of the conveyor ...

...without flange from 8 – 160 mm inner diameter Guide bush without flange from 8 – 160 mm inner diameter Maintenance-free sliding bearings Standard sliding bearings versus custom-made Not all application problems can be solved with a standard sliding bearing, but they offer significant advantages over in-house manufacturing or custom solutions. A standard sliding bearing is cost-effective...

... are produced in various designs: - Radial bearings (also available in split design) - Axial bearings (also available in split design) - Guide bearings - Joint bearings - Sliding plates - Guide rails - Sliding stones - Sliding segments...

... adjustable angle Variable setting of the start position from the training position High-quality sliding seat with linear guide mounted on ball bearings Training with one leg, comfortable and safe due to adjustable leg support and possibility to suspend the non- trained leg* Integrated storage compartment for aids* * Optional accessories Options 200 kg weight block (20 x 10 kg) Fine weight adjustment 2 kg SmartPanel compass 600 Medical LAN Isolator Position sensors Isometry measuring device Movement limitation Holder for drinks bottle Holder for Zimmer frames Lordosis support Wobble...

... manufacture conveyor rollers in diameters ranging from 30 to 85 mm and with load capacities from 10 to 490 kg. The double-sealed ball bearings are encapsulated with PEVOLON® or PEVOTHAN®. The VULKOLLAN® guide rollers, which are frequently used in conveyor technology and have steel roller bodies, are produced in diameters from 40 to 150 mm and load capacities from 55 to 1,030 kg. In addition, we offer ball rollers in various designs with load capacities ranging from 10 to 4,000 kg, as well as metal and plastic rollers for roller tracks.