a plastic Germany

...Disposable pallets are a practical and cost-effective solution for one-time use in the logistics and transportation industry. Here is some information about our disposable pallets: Description: Disposable pallets are typically made from wood, plastic, or cardboard and are specifically designed for single use. They are available in various sizes and designs to meet different requirements...

... quite cumbersome. By using colored IR-transparent materials for the entire housing profile, it can be manufactured as a single component. This makes installation much easier, which in turn increases your efficiency. Our profiles feature a highly precise inner and outer contour and can be customized to meet your specific wishes and needs.

...higher layer thicknesses can also be achieved. In addition, most plastics can also be equipped with antibacterial properties; of course in all colour variations. Although a one-sided coating more common, we are able to apply the same and/or different plastic adhesives for both sides.

...BEAT guarantees a top-notch product presentation at the point of sale as a revolutionary solution for display cases. This sleek plastic case provides the perfect storage option for your narrow, small, and elongated products and is now available in 31 different case formats. With design options such as In-Mould Labeling (IML) or screen printing, you have a variety of possibilities for customizing...

...We offer polymer ceramic component parts where plastic molding is required for complicated particle shapes and where the thermal stability of plastic is insufficient.

kcd GmbH is a developer and manufacturer of additives for thermoplastic plastics. For a variety of typical applications, we offer ready-made solutions in the areas of chemical blowing agents, microspheres masterbatches, lubricants, release agents, UV stabilization, and more. In addition to standard additive products, we also produce custom formulations for specific customer requirements and newl...

...Hook for tail gate locking system (partial plastic coated)...

...Hollow cutters made from special steel or aluminum. By combining twisted cutting edges, large chip chambers, and perfectly positioned suction openings, the resulting Styrofoam chips can be easily extracted through the cutter even at maximum feed rates. This makes even plunging (drilling) a non-issue. The spiral arrangement of the cutting edges, along with the chip breakers, allows for very high...

...Custom-Shaped Packaging on Customer Request Plastic Packaging In addition to standard shapes, we also offer a variety of custom shapes in our range. Our experienced staff is happy to advise you on realizing your special packaging request. Challenge us!

... treatment. In a chemical bath, copper particles can then be deposited specifically only on the activated surfaces. Other metals, e.g. nickel, tin or gold, can then be deposited onto the starting layer of copper. In this way, a selectively coated plastic part is obtained. MID technology thereby makes it possible to selectively coat two-dimensional and also three-dimensional plastic parts and use them, for example, as circuit carriers for electronic or mechatronic assemblies. With the LPKF-LDS process...

As a manufacturer, we deliver high-quality steel shelves at affordable prices. Our shelves, either galvanized or plastic-coated, offer a variety of solutions for industry, trade, crafts, and archives. Boltless shelves and bolt shelves are individually planned for you and usually delivered within 48 hours. With us, you can get special shelves and custom constructions for almost any type of stored g...

...As a certified system supplier in the automotive sector, we are capable of producing complex plastic injection molded parts affordably and, for example, assembling them into modules. Through advanced plastic machinery and experienced staff, we offer you a tailored solution in your specific application area. Our modern technical center includes its own design department, which can process any common file format. In combination with our in-house toolmaking, we therefore guarantee the highest flexibility.

... include: ISO 14644 ASTM G122-96 ASTM D6361 SAE AMS 0302 The PPM leak test stand is able to be programed to the customers requirement. The powerful in house built software enables exact design of pressure curves, such as holding times and exact pressure increase over time. It is an ideal solution for any sorts of plastic components. This exemplarily displayed test bench can utilize air or nitrogen as a test medium. Please get in touch about any other test mediums. In addition the PPM test benches can perform tests of multiple test units at a time.

... mechanical, thermal, and optical properties that closely resemble those of injection-molded plastic parts. Such parts are not only suitable for testing but also fill a gap for end products with low production volumes (e.g., housings in medical technology). Coloring and surface finishes can be implemented in almost all variations. Special requirements such as fire protection approvals or UV resistance are possible. By overmolding insert parts, composite parts (e.g., hard-soft combinations or metal composites) can be produced.

...Whether it's non-ferrous metal, stainless steel, or plastic, we can select and process the appropriate material for every task. You will receive the optimal material for your application.

The company HPS Hartmann Paletten Service GmbH & Co. KG is a service provider in the field of pallets and grid boxes for national and international matters. We supply our customers with pallets of all kinds, grid boxes, and various plastic pallets and containers. In the near future, we will also be able to offer our customers delivery of pellets & charcoal; particularly in the fuel sector, we al...

...GHS Company Building in Ruhla / Thuringia Here, technical plastic injection molded parts are manufactured.

...We manufacture plastic parts and assemblies for renowned manufacturers. The injection-molded parts are then refined in-house, for example, through pad printing and hot stamping.

...Plastic signs are used to label objects or components. They can be used indoors and outdoors.

The name Tolges stands for innovation and expertise in plastic technology and toolmaking. Ideas from plastic - this motto characterizes the ambition and performance of our company. Products from TOLGES are therefore used worldwide in many areas of daily life, trade, and industry. Our 90 qualified employees have been delivering creative ideas from plastic, custom productions, and comprehensive ...

Thank you for your interest! You have made the right choice. Whether for the household, hobby, or farm; whether from goat, cow, or sheep - making cheese is worth it. As part of a conscious diet, as a meaningful addition to self-sufficiency, as an expansion of the product range from the farm, or simply for the joy of DIY - making cheese is in vogue. And that's where the Bunte Kuh comes in. We sh...

...Our shrink tunnels come standard with heat-resistant transport rods coated with silicone rubber. Wire mesh tape, heat-resistant plastic link belts with chicanes, or rotating transport rods for processing fine shrink film are available as accessories for the shrink tunnel. The new hybrid chain is patented, maintenance-free, and another highlight of our shrink tunnels. The airflow within the shrink...

...Available: raw, coated (laminated or painted), veneered (plastic or wood)...

From product development to series tooling - everything from a single source It all started in 1990: Five employees focused exclusively on the then-revolutionary process of stereolithography and a few years later on the duplication process of vacuum casting. Today, there are more than 200 employees, and the company ModellTechnik Rapid Prototyping GmbH has established itself as one of the leading ...

...Industrial piping construction is the main component of IMH's contracts, where various plants and production lines in the automotive and general industries need to be equipped with a wide range of piping that varies in size, dimensions, and materials such as stainless steel, steel, and plastic. IMH has also successfully managed projects across Europe and overseas, where all piping materials were sourced in Germany and installed on-site.

...Liquid colorants are suitable for use in many areas of plastic processing and have become indispensable for transparent coloring.

... is also ideal for correcting distortion after bending sheets. The GL 2 comes with attachments for smoothing, shaping, and edging. New to the range are plastic attachments for working without surface damage, as well as attachments with a movable shaft for better processing at edges and corners. The GL 2 is available here as KIT 1 with a practical wall holder, including: - Smoothing Hammer GL 2...

...Combination of household comfort through ceramic cartridges and lightweight design through plastic housing. The spout and adjustable shower head (jet or spray, or completely shut off) are extendable with a hose (150 cm). Heat-resistant up to 3 bar. Optional equipment with microswitch.

Knüppel Verpackung offers a comprehensive range of packaging products as a wholesale packaging supplier. Our focus is on providing expert product and application advice, as well as developing customized packaging solutions for our clients. You benefit from our commitment to always finding sensible and up-to-date packaging solutions for all our customers. Many goals can already be achieved with op...

...Straight Connector for Fabric Hose We supply hose connectors for fabric hoses and rubber hoses in various sizes made of plastic and brass.