diamond coating Germany

...Coating on the work surface with synthetic diamond grain.

...diamond like carbon hardness: high friction: low color: black corrosion: resistant wear: resistant...

KUHN Beschichtungen GmbH operates as a service provider in coating technology. The offerings include the development and contract coating in the field of functional and decorative coatings. With over 20 years of experience in coating technology and state-of-the-art PVD-/CVD technologies, we enhance surface properties such as hardness, friction coefficient, wear and corrosion resistance, as well as...

...Thanks to their biocompatibility and freedom from glare, these coatings are also suitable for the food industry and medical applications. Coating thickness: 2 - 4 µm Max. application temperature: 350 - 400 °C Nano-hardness: 1,000 - 4,000 HV...

...-resistant qualities with and without adhesive coating – for use in all areas where rubber is subjected to high stress and abrasion (e.g., protective pads for elevator buckets for abrasive bulk materials or sleeves in the concrete industry).

...Diamond core drills optionally for processing natural stone, Dekton®, quartz composites, concrete/reinforced concrete, FRP/CFRP materials; new production and re-coating;...

...The flexible plastic coating optimally protects the steel cable from external influences without mechanically stressing it during deflections. The bead spacing further relieves the steel cable. Diameter: 8.5 mm Number of beads: e.g. 30, 35, 40 beads/m...

...Folacoat Plus, Folacoat Extreme, Folacoat Ultra T, Folacoat Diamond, Folacoat Pearl, Folacoat Basic, Folacoat Advance, Folacoat Flex...

...fine diamond coating on the working surfaces. ideal for all techniques, 1 to 1 as well as Russian Volume technique 2D-10D and also suitable for pre-made fans. slightly curved shape. super fine tip. precise grip. perfect closure. 100% hand-polished, precisely ground. mirror finish coating. made of high-quality surgical steel. long lifespan. Our eyelash extension tweezers are the best choice for...

...Allround router with quiet operation for machining of composite materials such as CFRP and GFRP in the diameter range Ø 0.20 to 6.00 mm. Advantages: Good surface, no delamination and fiber projections, low vibration, ideal for trimming, especially for dry machining suitable (low heat) For advanced materials such as carbon, carbon fiber, glass fiber (fiberglass) with multidirectional and unidirectional fiber orientation Roughing and finishing tools with and without diamond coating. Pulling, pushing (cutting pressure up / down, right twistes / left twisted, right hand cutting / left hand cutting)...

...fine-grain solid carbide high-performance drill: right-hand cutting, multidirectional, 90° point angle, prevents delamination, with diamond coating...

...We produce our DLC coating using the PACVD process. The term DLC ("Diamond-Like Carbon") refers to a group of amorphous, carbon-based coatings that are categorized into a total of 7 subcategories. Other names for DLC include i-carbon (also i-C) or amorphous carbon. The DLC coating we currently offer belongs to the group of hydrogenated amorphous carbon coatings (nomenclature name: a-C:H). These...

...In the field of tool coating, we offer the following PVD coatings: DECOAT DLC plus (Diamond Like Carbon, carbon coating) DECOAT TiN (Titanium Nitride) DECOAT AlTiN (Aluminum Titanium)...

...Excellent diamond nail file is especially suitable for brittle fingernails. Due to the high-quality diamond coating, the nail is filed gently and does not splinter. Order number:19010 EAN:4250550302673...

...All our tart rings are made exclusively from stainless steel 1.4301! Tart Rings: Round, Hexagon, Diamond, Oval (Egg-shaped), Pointed Oval, Bunny Cutter...

...Anti-slip coating with high adaptability and extra strong slip resistance. The back is coated with a self-adhesive, flexible aluminum foil that permanently conforms to the structure of the substrate. Ideal for metallic surfaces, such as steel, stainless steel, or aluminum checker plate/diamond plate. The shape adjustment is done with a standard rubber mallet. Key data: 150 x 610 mm (W x L) black self-adhesive very durable and long-lasting rounded corners...

...The specific requirement for grinding tools used in internal cylindrical grinding is that a high material removal rate must be achieved despite a lower grain content. We can provide you with the entire range of grinding tools to meet your needs. We specialize in: + CBN and diamond grinding wheels on various backing materials - including re-coating of electroplated tools, profiling, and...

...Massive cast iron grill grate with diamond branding as a replacement part for brand grills New cast iron replacement grill grates with beautiful diamond branding suitable for many brand grill manufacturers. The grill grates from KC BRANDING are particularly robust, allowing them to retain heat for a long time. Additionally, these grill grates feature a beautiful diamond pattern that leaves a great branding on the grilled food. These grill grates are made solely from cast iron without an enamel coating. Weight: 5.5 kg...

...The radius cutter RD is a top-tier product for machining graphite. - Radius tolerance ±0.005 mm - Diameter tolerance 0 mm / -0.01 mm - Diameter from 3 mm to 12 mm - Free length L3 customized to customer specifications - Ultra fine grain specifically for diamond coating and graphite machining - 35° right-hand twist...

...The Leica EM RAPID milling system for pharmaceutical research enables sample preparation for analyzing the distribution of active ingredients in solid-form medications. High-performance tungsten carbide or diamond milling tools de-encapsulate the tablets and mill them without causing smear effects from the outer coating layer. The rotational speed can be varied between 300 and 20,000 rpm, and the sample can also be milled in precisely defined increments.

...Wide selection of solid carbide end mills. For example: CompoTool from the HSC series with TIXAL SIGMA coating. Information about the TIXAL SIGMA coating: Diamond-like layer with high wear resistance and extremely low friction coefficient. A thin layer thickness results in significantly less edge rounding at the cutting edge. Specifically designed for machining composite materials. Number of teeth: 5 Helix angle: 0° Pitch: equal Tooth type: WS Cutting material: K40F Coating: TIXAL SIGMA Item (example): 230 00 05C...

...Aluminum from 0.4mm thickness Stainless steel from 0.05mm thickness High precision +/- 0.02mm (parallelism) Color coding (aluminum) Laser engraving Diamond coating (friction value increase) Shapes Various geometries can be manufactured according to specifications. Thicknesses From 0.4mm thickness in aluminum (7075) and from 0.05mm in spring steel (1.4310/1.4034). Height tolerance +/- 0.02mm Coating (for aluminum) Natural or colored anodized. Blue, Red, Black, Green, Gold, Orange, Purple, Gray...

...Description: Natural rubber latex glove with reliable resistance to various chemicals, double protection through dual coating. Unlined heavy-duty glove with a textured diamond finish, making it robust and durable while providing excellent grip in both wet and dry conditions. Velour made from pure cotton reduces the risk of skin irritation. Particularly suitable for aircraft manufacturing, battery production, the chemical industry, or the electronics industry, length 212 mm.

... systems. Additionally, the nanodiamond possesses properties such as resistance to acid, alkali, and salt corrosion, as well as biological non-toxicity. Application areas: It is very suitable for heavy-duty corrosion-resistant coatings, special functional coating additives, and is also appropriate for other composite material additives. Available particle sizes: Particle sizes can be customized according to customer requirements, and we are happy to provide samples for testing.

... the surface. These surfaces complement the existing production and storage program of the Designfactory. The areas of application are very versatile: elevator construction, facade and metal construction, shop fitting, decorative interior design, lighting industry, etc. Colors: • gold • brass • champagne • bronze • copper • mocha • blue • anthracite • black • (additional colors available upon customer request) Base / Variants: • mirror/high-gloss polished • glass bead/ceramic/diamond blasted • perforated sheets (including inner holes) • ground (K 80-1200) (grinding pattern longitudinal and...

... remains particularly intact for profiled grinding wheels, and the costs and delivery times for new base bodies are eliminated. You can choose from a variety of grits ranging from 20 µm to 850 µm grain size. The base body should be made of steel. For the processing of a coating at DIT Diamanttechnik GmbH & Co. KG, you should plan approximately 3 weeks. Diamond and CBN tools with ceramic or resin bonds are not recoated.

...Oval sharpening rod with sapphire coating. This sharpening rod belongs to the diamond rods, but with the advantage that the edge does not become as rough with the same material removal.

... Inserts (Sizes E1/E2/E3) (Quantity): 28/20/12 Material: very stable construction made of sheet steel Design: Body, with 4 cassettes for equipping with tool inserts and tools, 1 shelf, 2 handles Additional Features: high flexibility due to the repositioning of tool inserts in a 25-mm grid, compatibility of all tool inserts and sizes possible (Sizes E1/E2/E3) Order Note: without tools and tool inserts, please order tool inserts separately Load Capacity (kg): 150, with evenly distributed load Coating: Powder coating in an environmentally friendly painting process...

The company MHB-Majaura GmbH offers the production of hard coatings on metal surfaces. Through the development of the fully automated coating process, we are able to provide short delivery times and cost-effective manufacturing for individual parts, small or large series. By continuously monitoring the process parameters, we guarantee extremely reproducible and consistently high coating qualities.

... processing are served. Our long-standing customers mainly come from Europe, but also from Asia and South America. PlanoTek Functional Coatings The specific requirements for the functionality of surfaces are met by our unique PlanoTek layers. This coating technology developed by NovoPlan provides functions that can be used individually or in combination for each application case. These include wear...