compressed gases Germany

...With RIEGLER cylinder pressure regulators, compressed gases are extracted from gas cylinders used in welding, cutting, or other related processes. We offer cylinder pressure regulators according to DIN EN ISO 2503 for non-flammable and flammable gases up to 200 bar and up to 300 bar. All cylinder pressure regulators are equipped with a pressure gauge for displaying the cylinder contents and the...

...Stationary and mobile consumption measurement in compressed air and gases, laminar flow measurement, measurement of burner supply air and leakage flows. The measurement principle is based on the heat transfer from an electrically heated body to the surrounding medium. Thermal flow sensors primarily measure the standard flow velocity Nv. From this, the standard volume flow and mass flow can be...

...Poppe + Potthoff Maschinenbau GmbH supplies compressor units and pressure control systems of up to 400 bar for various gases. We offer ready-to-connect units to increase the existing pressure for pneumatic and hydraulic applications. In this way, the performance of existing systems can be increased flexibly and efficiently. Our compressor units are used wherever the existing system pressure is insufficient to implement specific applications. Of course, our systems are UL or CE compliant as required. In addition, we offer you service and support directly on-site.

... agitator has an integrated bearing and coupling housing with flexible coupling to connect drives with shaft journals. The NRK can be supplied with radial shaft seal rings for non-pressurized operation or with liquid-lubricated mechanical seals on pressurized tanks. Explosion protection to ATEX 2014/34/EU for explosive zones 0 to 2 for gases and for explosive zones 20-22 for dusts (device group II, categories 1-3).

... stepless, delicate flow regulation or complete stop of the flow are possible, even for existing hose connections. The hose is compressed over a wide area against the sturdy steel hook in order to prevent it from being damaged. Material:Galvanised steel and aluminium...

... drives are also available with zero voltage reset. Motor drive: Actuating force: 800N; Motor voltages: 24V AC/DC, 230V, 110/120V; Control: 3-point; (0)2-10V; (0)4-20mA Versions: Low temperature version; Pressure-relieved version; Oil, grease, silicone, or PTFE-free versions; ... Nominal diameter: DN 15 - DN 50 Nominal pressure: PN 40 Materials: Stainless steel 1.4408 Temperature: -100°C to +220°C Connections: Whitworth pipe thread; NPT thread Application: Gases, vapors, liquids Protection class: IP65...

...The CSN® tubular heating elements are of versatile application and have a long life span, if appropriately used. The tubular heating elements serve for the calefaction of gases, liquids and solid matters. The configuration of the elements is jointly decisive for the effectiveness. CSN ® tubular heating elements are available as round heating elements in diameters of 6.5 / 8.5 / 11.5 and 16 mm...

...The electronic pressure switch DS 210 is a successful combination of — intelligent pressure switch — digital display device and is designed for measuring very low overpressures as well as for vacuum applications. Suitable measuring media include gases, compressed air, and thin, non-aggressive liquids. By default, the DS 210 is equipped with a PNP switching output and a rotatable display module...

...The flow sensors for gaseous fluids provide a signal proportional to the mass flow rate of air. The devices are intuitively adjustable using a potentiometer and an LED display. The LDN 500 is particularly well-suited for reliably monitoring compressed air flow and other gases.

...town gas, nitrogen, hydrogen and, ammonia Suitable for checking the safety of systems with combustible gases and for avoiding financial losses through unrecognized leaks Advantages and benefits Frost-proof to -15°C Saves energy and warns of gas loss Contains corrosion protection inhibitors Tested by the DVGW in accordance with DIN EN 14291 Non-combustible Economical in use Operating temperature:-15 °C → up to +50 °C...

...The bottle pressure regulator with manual connection reduces the bottle pressure of compressed and pressurized gases from a maximum of 200 bar (300 bar available upon request) to a pressure suitable for the flowmeter. The desired quantity in l/min can be set consistently at the flowmeter. Important: This pressure regulator has a constant working pressure of 2.5 bar to protect the gas flow sensor...

... groups on the polymer surface, different process gases can be used. Power: 200 W per nozzle Channels: 1-2 Process gas: Air, Oxygen, Argon, Nitrogen Potential-free: nearly Transformer: internal & external EDC technology: integrated NDC2 technology: integrable...

...The OPTISONIC 7300 is a universal 2-path ultrasonic gas flowmeter for process and utility gas measurements in oil and gas refineries or the chemical or petrochemical industries. It is also suitable for non-custody transfer natural gas applications or applications with (compressed) air, mixed or flue gases (up to +180°C / +356°F). Using the transit time differential measuring principle, the...

... — Highly accurate for both small and large flows — Pressure and temperature compensated through the thermal mass flow principle — Easy installation and removal of the sensor; the integrated measuring section can remain in the pipeline for cleaning or recalibration of the sensor and can simply be closed with a cap — No moving parts, thus low maintenance — Negligible pressure loss due to minimal blockage of the diameter — Usable for compressed air and non-corrosive gases such as nitrogen, oxygen, argon, helium, and many more.

...Adsorption Dryers – Cold Regenerating For Compressed Air and Neutral Gases Replaceable Dryer Cartridge Direct Installation in Maintenance Unit Compressed Air Treatment The standard-compliant, compact DRUMAG modular compressed air treatment units are characterized by good control properties, excellent flow characteristics, and high safety. They can be combined, easily assembled, and maintained without tools, and offer a wide range of accessory options.

...Differential pressure 0 … 1.6 mbar to 0 … 1000 mbar Accuracy: 0.5% FSO BFSL Current and voltage output signals in 2- and 3-wire technology Selectable measurement ranges Adjustable damping The IDPS 300 pressure transmitter has been designed for the differential pressure measurement of dry, non-aggressive gases and compressed air, and can be used for a wide range of HVAC applications. The IDPS...

... in pneumatics as an energy carrier (compressed air brakes), for signal transmission (analogous to electrical current), for cleaning, cooling, nitrogen generation, and as a gas for breathing. UN Number: UN 1002 Valve: G 5/8" internal 25E. GK DIN477 No. 13 Color: RAL 6018 light green...

...Application Miniaturized 3/2-way cartridge valve in the 8 mm Spider series. This is used as a pneumatic pilot valve or for direct control for precise dosing of gases or liquids. Benefits This very compact valve is suitable for direct mounting in a valve block. All pneumatic or hydraulic connections can be integrated into the valve block. Nominal diameter::0.5 – 1 mm Pressure range::2...8 bar Power consumption::0.55 W Medium::Compressed air Valve body::Stainless steel...

...Versatile overpressure stage (single-stage) for plant construction. Drive: belt-driven or directly coupled. Very energy-efficient, robust, durable, and low-maintenance. Available in 10 power levels up to a maximum of 355 kW. Flow rate: 69 to 3,180 m³/h Overpressure: 13 bar (g) Pumping medium: air and neutral gases...

...One interface for compressed air, gases, fluids, vacuum, electrical and electronic signals - Maximum modularity due to freely configurable connections - Integrated coding in the housings prevents incorrect connections - Easy, tool-free mounting and dismounting - Locking lever reduces the force needed for assembly - Machine set-up times are reduced - Fits to Eisele adaptive inserts...

BlueSens is your specialist in gas analysis for bioprocess technology, from laboratory to industrial scale. We have over 15 years of experience in the field and are a market leader in gas analysis solutions of all kinds. Our philosophy is to measure where it happens – directly in the process. With our high-quality sensors, we serve customers worldwide in the fields of pharmaceuticals, food, feed, ...

...For the storage, provision, and retrieval of compressed gases, as well as for gas cylinder handling, asecos, as the market leader in fire-protected safety cabinets, offers you a wide range of products. For the storage of compressed gas cylinders indoors in accordance with DIN EN 14470-2 and TRGS 510, the asecos G-LINE models are suitable. — Suitable for up to 4 compressed gas cylinders of 50...

...The spring pressure reducer is used for single-stage reduction of compressed air and neutral gases. The adjustment of the set pressure is done via a spring. Series Version Nominal Diameter: DN 6 to DN 100 Nominal Pressure: up to PN 320 bar Operating Temperature: -30 to +80 °C Operating Medium: Compressed air and neutral gases Inlet Pressure: max. 320 bar Installation Position: any Connections: threaded connections Function Test: Pressure reducer (including performance measurement) Materials Housing: 2.0967 Internal Parts: 2.0967 / 2.0958 / 1.4310 Seals: NBR / PA6.6...

...— Used as a terminal fitting for ventilation openings in tank systems, explosion-proof for flammable media of explosion group IIB3 with a standard gap width (NSW) ≥ 0.65 mm for a maximum operating temperature of 60 °C. — The fitting must not terminate in a closed space. — Installation on tank roofs, dome covers, or at the end of venting and exhaust lines. — The terminal fitting prevents flame propagation into the containers. — The gases of the stored medium are released unhindered into the atmosphere.

...These are tube bundle heat exchangers specifically designed for the cooling of pressurized gases (natural gas, methane, hydrogen, compressed air, mixed gases). The construction material is stainless steel (AISI 304, 316, and 321). The operating pressure on the gas side is up to 1000 bar. They are designed and manufactured according to ASME VIII div.1, EN 13445, and TEMA, and are PED certified.

...For medical facilities, vacuum supply is of immense importance. The vacuum supply is as essential for medical facilities as the supply of medical gases, such as: - Oxygen, - Compressed air, - Nitrous oxide. The reliability of vacuum supply plays a crucial role in this context. In our sales program, we offer a proven central vacuum system for medical facilities. These not only meet the...

...Application specific ring sets Improved properties are: Extrusion resistance, if high pressures have to be sealed and/or bigger gaps than the normally recommended max of 25 of the packing size are found. Wiper function, if any micro scaling is found on the stem and at reciprocating movement with control valves Blow out safety, when sealing high compressed gases and fumes Pliability, with low...

...laboratory supplies, compressed air drying, and pressure equalization containers. It is excellent for drying air and gases. Silica Gel as Bulk Material - For numerous applications, e.g., in industrial drying systems - Available in white and orange (with optical saturation indicator) Silica Gel - Silica gel for column chromatography - Grain size: 0.063-0.200 mm (fine) and 0.040 - 0.063 mm (extra fine) - Mesh size: 70-230 or 230-400 mesh ASTM - Pore diameter: 60 A - CAS No.: 7631-86-9...

Under the brand captor®, we develop, produce, and distribute sensors for monitoring and measuring liquid and gaseous media, as well as inductive proximity switches and hot metal detectors. For over 60 years, weber Sensors has been represented in the global sensor market. Under the brand captor®, we develop, produce, and distribute sensors for monitoring and measuring liquid and gaseous media, as...

...System press fittings made of copper and copper alloys for copper pipes according to DIN EN 1057 or DVGW worksheet GW 392 for solar and high-temperature applications as well as for compressed air, featuring a red molded seal made of FKM (fluorocarbon or fluororubber). Material: Copper Cu-DHP (CW024A / CW724R) Seal: FKM Operating pressure: Flammable / Technical gases: 5 / 16 bar Operating temperature: -20 °C - 200 °C Dimension: 12 - 108 mm...