Results for

Electrical systems

194 Companies

264 Products

Product recommendations

Turkey

Turkey

Turkey

Turkey

See more products

PLENGE GMBH

Germany

The company PLENGE GMBH, is a Manufacturer/ Producer, which operates in the ELECTRICAL SYSTEMS industry. It is based in Oelde, Germany.
ORMAZABAL GMBH

Germany

The company ORMAZABAL GMBH, is a Manufacturer/ Producer, which operates in the ELECTRICAL SYSTEMS industry. It is based in Krefeld, Germany.
IVEMA FAHRLEITUNGSBAU GMBH

Germany

The company IVEMA FAHRLEITUNGSBAU GMBH, is a Manufacturer/ Producer, which operates in the ELECTRICAL SYSTEMS industry. It is based in Muelheim An Der Ruhr, Germany.
FRIEDRICH SCHULTZE GMBH

Germany

Schultze RiRo is a reliable partner in nearly all imaginable applications – we stand out thanks to the extraordinary stability and simple connection of their products. Our finned tube heaters protect your delicate systems against frost. Dirt, moisture or water jets and temporary flooding are not a problem for Schultze RiRos because these trade and industrial heaters fulfil all the criteria of protection class IP 66/67.

All the products for "electrical systems"

Finned Tube Heater w/ thermostat, low surface temperature

Finned Tube Heater w/ low surface temperature

Finned Tube Heater w/ thermostat

Website See all products
KLÖPPER-THERM GMBH & CO. KG

Germany

With over 90 years of experience, Klöpper-Therm from Germany has specialised in development, planning, manufacture and installation of electric heating systems for industrial applications to suit a wide range of requirements. Alongside individual customer requests, all international standards required are taken into consideration during planning and construction. The heating systems can be supplied as explosion-proof for use in explosion hazardous areas (zones 1 and 2) on request. Reliable functioning, the highest quality and great economic benefits of our products form the basis or our reputation as a specialist in electric heating systems. Klöpper-Therm puts this motto into practice for our customers with motivation and the latest technologies. Klöpper-Therm electric heating systems embody the highest quality right from the start.

All the products for "electrical systems"

Temperature Controllers And Temperature Sensors

Braking Resistor Unit

Heat Tracing

Uniplex Iii

Uniwin

Website See all products

A page for your business

Can you see this? Your potential clients will too. Join us now so you too can be visible on europages

Add my business

OPTIMEL SCHMELZGUSSTECHNIK GMBH

Germany

Since OptiMel was founded, innovation and pioneering spirit have been key aspects of our work. As a pioneer in low pressure moulding know-how and a keen proponent of electronics moulding, it is our aim to constantly expand the possibilities of low pressure moulding technology. We offer our customers a full technology consulting service, production equipment, tools and casting materials tailored to requirements and comprehensive support and service solutions. With our long-standing experience and flexibility in implementation, we find the right solution for every project. Furthermore, we contribute to creating an environmentally-friendly, social world of work and social responsibility. We call on long-standing cooperation founded on trust – with our customers, whose projects never cease to present us with new challenges; with partners and suppliers for common innovations and constant delivery quality; and finally with our employees, whose enthusiasm and extensive experience make our success possible. · Over 25 years' experience · Experts in low pressure moulding · Certified ISO 9001 · International network of partners · 25 long-time employees · Training organisation since 2011 · Innovative and flexible · Climate-neutral firm

All the products for "electrical systems"

Potting of electrical & electronic assemblies,potting systems, hotmelt potting

Potting of electrical & electronic assemblies, potting systems,hotmelt potting

Potting of electrical & electronic assemblies, potting systems, hotmelt potting

Website See all products
IGUS® GMBH

Germany

igus® develops and manufactures plastic-based energy chains, highly flexible lines for active utilisation purposes in energy supply chains, as well as maintenance-free plain bearings, joint bearings and linear systems manufactured from high-performance plastic. Ready-to-use energy chains, including lines and plugs, ready-to-use cables/lines according to manufacturer standards or as individually requested by clients, as well as drive technology, plastic ball bearings, semi-manufactured goods and robotic joints form part of the igus® range. We have more than 100, 000 products in stock and from "batch size one".

All the products for "electrical systems"

PMA cable systems for protection of electrical lines

Website See all products
RITTER STARKSTROMTECHNIK GMBH & CO. KG

Germany

A passion for energy is the key to the success of medium-sized company Ritter Starkstromtechnik. Our history stretches back more than 80 years, and today we are proud to be an innovative and dependable partner for our customers, offering new projects to combat their everyday problems. We rise to every challenge. We liaise closely with the customer to tailor specialist solutions by means of extraordinary passion and drive from dedicated employees who always give their very best. Today, the company group employs more than 500 people. The company operates six sites across Germany, located in Dortmund, Olfen, Wilnsdorf, Magdeburg, Berlin and Leuna. We are certified to DIN EN ISO 9001 standard and strive to maintain close relations with customers through our wide-ranging services, corporate responsibility, standout products and impeccable customer service. The reliability, innovation and quality of our products are testament to our passion for energy.

Website
HAAKE TECHNIK GMBH

Germany

Since 1987, the family-run company Haake Technik GmbH has been providing the greatest safety at workplaces worldwide. The safety engineering products from our own production in Germany have been convincing well-known partners, companies, businesses and public institutions with innovative solutions for many years. By using high-quality materials we contribute to the prevention of accidents and to the protection and preservation of our environment. Our goal: Safe interaction between man and machine When man and machine come together, the highest safety precautions and standards are required. Special safety solutions are particularly in demand in certain sectors, such as the automotive industry, the chemical industry, logistics, mechanical engineering, the oil and gas industry, but also in young branches such as robotics. We see ourselves as problem solvers for these specific security issues and are today experts in individual planning, according to the security requirements and needs of our customers. Our product range offers exactly the right product for every area where security must be guaranteed.

Website
VACU-LIFT TRANSPORTSYSTEME GMBH

Germany

We build VacuLifter®. Made in Germany. As the inventor of vacuum lifting equipment, we have been developing innovative transport systems under the name VacuLifter® for over 50 years, which simplify production processes in a variety of industries through high efficiency. We can proudly point out that today more than 28, 000 VacuLifter® products are in use worldwide in craft businesses up to multinational companies (e.g. aircraft construction and the automotive industry) and that VACU-LIFT is the leader on a national and international level. Thanks to comprehensive expertise, professional project management and permanent research and development work, we have the best possible prerequisites to also provide you with customised industry solutions.

Website

GRUBE GROUP

Germany

The Grube Group has been meeting the requirements of the market and performing services all around the world since 1974. Using different methods, the company specialises in assembly work for major industrial centres, thermal power plants and petrochemicals. This involves the use of mobile annealing lines and mobile machining equipment, among other machinery. Thanks not only to our long-standing expertise and state-of-the-art technology, but also our exceptional flexibility and mobility, the company is now the first-choice partner for industrial and major customers. In addition, our HR service is available 24 hours a day. A service you can trust. References from successful projects within Germany and abroad. In recent years, the Grube Group has supervised countless projects all across the world – from a chemical park in Belgium to a Russian pipeline in the Black Sea, from Bavaria to Algeria. The Grube Gruppe is always the right choice when particular quality and flexibility are required. We can offer the following for your project, among other services: Sophisticated plant technology, quality-oriented HR services, consumables and accessories, as well as quick and simple order processing. We also provide services in mobile machining technology, cutting, chamfering, machining sealing surfaces, pre-heating and annealing pipework, among other areas. You can find our entire range of products and services at our website www.grube.group. If you have any further questions, please do not hesitate to contact us.

Website
TROTEC GMBH

Germany

TROTEC. BEST CONDITIONS FOR YOUR CLIMATE. What we do, we do with passion and real conviction. We are always there when it comes to climate. Dehumidification, heating, air conditioning or ventilation, Trotec, our brand name, stands for high-tech climate conditioning. Made in Heinsberg, Germany. Research, development, production and sales come from a single source. This means our customers can absolutely rely on us, always and anywhere, while we are your contact person and problem solver. That is what our Trotec brand name stands for. So we are committed. What we have is responsibility for now and foresight for tomorrow. Our innovations focus on cutting-edge technology that does not lose touch with humanity. Whether it concerns your health or sustainability, we are continuously working on the most relevant, current and important topics and technologies. We finally turn our ideas and technologies into innovative products that accompany you at work or in your home. Making your work a little easier and your own four walls more comfortable. Best climate with Trotec.

All the products for "electrical systems"

Mobile dehumidifier - DH 65 S

Website See all products

Product recommendations

Turkey

Turkey

Turkey

Turkey

See more products

MICROCONTROL GMBH & CO. KG - SYSTEMHAUS FÜR AUTOMATISIERUNG

Germany

For over 25 years, MicroControl has been a leader in CAN bus applications for industries such as mechanical engineering, automotive engineering and medical technology. We provide high-quality solutions for converting analogue data into digital data, support Industry 4.0 and provide custom-made hardware and software solutions. From "1.I/O modules" to training courses, we are your partner for innovative automation technology. Visit our website for more information. Our "µCAN modules" form the link for networking analogue and digital I/O signals via the CAN bus. They offer a wider temperature range, better resolution, a wider supply voltage and high degrees of protection. With our FDready system, we facilitate quicker data transmission rates without additional investments. 2. Controls Our µMIC.200 family offers forward-looking control technology for IoT gateways, small control systems and top-hat rail PCs. Easy to program with Node-RED or in C/C++, they provide a wide range of digital communication interfaces and are Industry 4.0-ready. 3. CANopen/CANopen FD and J1939 protocol stacks Our protocol stacks accelerate software development while providing security, increased speed and efficiency. Thanks to our modular system, they can be perfectly adapted to requirements. 4. Hardware and software advice and development 5. Training in BUS technology Our exclusive training offers include practical workshops.

Website See all products
MERECS ENGINEERING GMBH

Germany

Merecs Engineering GmbH specialises in the areas of test automation, software development and test equipment construction. Our range of services include defining requirements, design and implementation, training and commissioning domestically and abroad, plus comprehensive support and maintenance of test systems. Examples include: - End-of-line test benches, durability test benches, development test benches, climate and temperature test benches, leakage test benches (gas/hydrogen), test benches for tilt sensors/multi-axis movement simulation, test benches for power electronics and E-charging points. Working with our customers, we can connect these test systems to their IT infrastructure (databases/ERP systems). Using Python and Microsoft PowerBI, we produce automated analyses of test and production data on request. For this purpose, we create well-structured dashboards (available online on the company network at any time) showing important key figures such as First Pass Yield (FPY), process capability, statistics, etc. As a National Instruments Alliance Partner, we use NI TestStand as a test management tool and NI LabVIEW for software development. Our certified and experienced software architects and developers have an extensive library of software modules that are used in the field of test automation and beyond. In addition, we use C/C++ in embedded systems where microcontrollers are used

All the products for "electrical systems"

LabVIEW-RT / LabVIEW-FPGA / PXI / cRIO

Website See all products
VERFAHRENSTECHNIK HÜBERS GMBH

Germany

HÜBERS is one of the world's leading suppliers of machines and systems for resin casting and impregnation applications. The process technology for the preparation, mixing and dosing of epoxy, polyurethane and polyester resin systems as well as LSR and RTV silicones is a core part of our business. Our customers in the fields of electrical, electronics, medical, automotive and aerospace engineering, and other industries around the world manufacture different products on our systems – from diodes to high-voltage insulators. Since 1980 alone, more than 2, 800 machines and systems have been delivered to 60 countries. Since 1937 we have been providing maximum efficiency and 100 per cent quality for every production task – with our proven systems or customized new developments from our Technical Development Centre. Up to now, we have registered 100 utility models and patents.

All the products for "electrical systems"

Impregnation Systems for Electrical Engineering

Casting Systems for Electric Parts

See all products
FISCHER PANDA GMBH

Germany

Fischer Panda GmbH is a worldwide renowned manufacturer of diesel generators, hybrid and drive systems for mobile marine and vehicle applications. Fischer Panda Generators are the ideal choice for professional sailing and boating. The generators are light, quiet, very efficient and compact. The generator set is housed within a sound-insulated capsule which shields against operational noise and vibration. Fischer Panda marine generators are so compactly constructed that they require only the minimal space on board.The generators supply power for electrical systems on board, electrical drives and complete mobile power supply systems as well as diving compressors and air-conditioning units.Our product range includes over 200 different generators and covers a performance range from 2.5 kw up to 200 kW.
HERMANN ZANDER GMBH & CO. KG

Germany

The company HERMANN ZANDER GMBH & CO. KG, is a Manufacturer/ Producer, which operates in the Electrical systems and equipment industry. It is based in Aachen, Germany.
BOPLA GEHÄUSE SYSTEME GMBH

Germany

The company BOPLA GEHÄUSE SYSTEME GMBH, is a Manufacturer/ Producer, which operates in the Electrical systems and equipment industry. It is based in Bünde, Germany.
SÄLZER ELECTRIC GMBH

Germany

The company SÄLZER ELECTRIC GMBH, is a Manufacturer/ Producer, which operates in the Electrical systems and equipment industry. It is based in Wenden, Germany.
ASHCROFT INSTRUMENTS GMBH

Germany

The company ASHCROFT INSTRUMENTS GMBH, is a Manufacturer/ Producer, which operates in the Accumulators and batteries industry. It also operates in the Electricity generators, Electrical components and parts, Electrical systems and equipment, Electricity - distribution equipment, Electricity generators, Electrical components and parts, Electrical systems and equipment, and Electricity - distribution equipment industries. It is based in Baesweiler, Germany.

BSOL BATTERIESYSTEME GMBH

Germany

The company BSOL BATTERIESYSTEME GMBH, is a Manufacturer/ Producer, which operates in the Electrical systems and equipment industry. It also operates in the Accumulators and batteries, Batteries, Passive electronic components and printed circuits, Accumulators and batteries, Batteries, and Passive electronic components and printed circuits industries. It is based in Düsseldorf, Germany.
ELEKTRO-APPARATE-SCHALTANLAGEN GMBH

Germany

The company ELEKTRO-APPARATE-SCHALTANLAGEN GMBH, is a Manufacturer/ Producer, which operates in the Electricity - distribution industry. It also operates in the medium voltage industrial electrical systems industries. It is based in Dortmund, Germany.
ORGATEX FRANK LEVIN GMBH & CO KG

Germany

The company ORGATEX FRANK LEVIN GMBH & CO KG, is a Manufacturer/ Producer, which operates in the Magnets industry. It also operates in the Signs and signalling panels and boards, Electronic data processing - software, Electrical systems and equipment, Composition, photocomposition and photoengraving, Signs and signalling panels and boards, Electronic data processing - software, Electrical systems and equipment, and Composition, photocomposition and photoengraving industries. It is based in Langenfeld, Germany.
LALESSE EUROPE GMBH

Germany

The company LALESSE EUROPE GMBH, is a Manufacturer/ Producer, which operates in the Automation - systems and equipment industry. It also operates in the Electronic data processing - software, Electrical components and parts, Electrical systems and equipment, Road transport, Electronic data processing - software, Electrical components and parts, Electrical systems and equipment, and Road transport industries. It is based in Kleve, Germany.
DKS KAUFMANN SCHALTANLAGEN GMBH & CO. KG

Germany

The company DKS KAUFMANN SCHALTANLAGEN GMBH & CO. KG, is a Manufacturer/ Producer, which operates in the Finishing work industry. It also operates in the Electricity - works, Electricity - distribution equipment, Electrical components and parts, Electrical systems and equipment, Electricity - works, Electricity - distribution equipment, Electrical components and parts, and Electrical systems and equipment industries. It is based in Hennef, Germany.
BERGFELD ELEKTROTECHNIK GMBH

Germany

The company BERGFELD ELEKTROTECHNIK GMBH, is a Manufacturer/ Producer, which operates in the Finishing work industry. It also operates in the Electricity - works, Electricity - distribution equipment, Electrical components and parts, Electrical systems and equipment, Electricity - works, Electricity - distribution equipment, Electrical components and parts, and Electrical systems and equipment industries. It is based in Bielefeld, Germany.
VALTIN-ELEKTRO GMBH

Germany

The company VALTIN-ELEKTRO GMBH, is a Manufacturer/ Producer, which operates in the Finishing work industry. It also operates in the Electricity - works, Electricity - distribution equipment, Electrical components and parts, Electrical systems and equipment, Electricity - works, Electricity - distribution equipment, Electrical components and parts, and Electrical systems and equipment industries. It is based in Dortmund, Germany.
LEOPOLD KOSTAL GMBH & CO. KG

Germany

The company LEOPOLD KOSTAL GMBH & CO. KG, is a Manufacturer/ Producer, which operates in the Vehicles - Telematics industry. It also operates in the Signalling - systems and installations, Radar and radio navigation equipment, Electrical components and parts, Electrical systems and equipment, Signalling - systems and installations, Radar and radio navigation equipment, Electrical components and parts, and Electrical systems and equipment industries. It is based in Meinerzhagen, Germany.
PETER ZAHN

Germany

The company PETER ZAHN, is a Manufacturer/ Producer, which operates in the Electronic data processing - software industry. It also operates in the Software - business management, Electrical components and parts, Electrical systems and equipment, Passive electronic components and printed circuits, Software - business management, Electrical components and parts, Electrical systems and equipment, and Passive electronic components and printed circuits industries. It is based in Bielefeld, Germany.
ENS SCHALTANLAGEN GMBH

Germany

The company ENS SCHALTANLAGEN GMBH, is a Manufacturer/ Producer, which operates in the Finishing work industry. It also operates in the Electricity - works, Electricity - distribution equipment, Electrical components and parts, Electrical systems and equipment, Electricity - works, Electricity - distribution equipment, Electrical components and parts, and Electrical systems and equipment industries. It is based in Hiddenhausen, Germany.

Request for quotes

Create one request and get multiple quotes form verified suppliers.

Only relevant suppliers
Data privacy compliant
100% free

Find quotes for

Filters

Results for

Electrical systems

Number of results

194 Companies