thermal processing Germany

...Our additional services include the processing and surface treatment of raw parts, as well as the pre-assembly and assembly of components. Your needs determine the scope.

...We are specialized in performing thermal shock testing of electronic and mechanical assemblies and have a lot of experience with the requirements of the automotive industry and medical technology. On behalf of our customers, we perform environmental and climatic tests according to customer specifications and applicable standards, thus uncovering optimization potential. We will be happy to advise...

...We developed a special process for making fine powder systems and composites from low-viscosity melts. With the patented cryo-spraying process CSP, it has become possible to produce highly sensitive products directly from a hot melt to form a solid powder without after-cooling. The entire spraying process is overlaid with nitrogen and also protects very critical substances against oxidation and thermal stress.

... line and integrated heating, which can be configured for specific kiln applications. Applications: Cement and lime production • Paper manufacturing • Metal processing, chemical industry, and waste incineration...

...Equipped with CAN or CANopen interfaces and a 19″ slide-in casing, the MicroControl µLAB is particulary suitable for measuring electric, thermal and mechanic signals in engine or components testing facilities The signal wires are connected to the module by plug-in connectors in the front plate. Current 0(4)…20 mA:Accuracy 0.01% (FS) Resolution 16-bit (1 µA):Resolution 16-bit (1 µA) Operating temperatures -40…+85 °C:Supply voltage 9…36 V DC Fieldbus CAN:Protocol CANopen / Raw CAN...

...The new IR camera optris PI 08M minimizes measurement errors at unknown or varying emissivities due to its wavelength range of 800 nm. With its spectral range and continuous measurement range from 575 °C to 1900 °C, this compact thermal imaging camera is particularly suitable for temperature measurement in all laser processing applications due to its excellent radiation blocking. The image...

...Some technicians use the term thermal insulation board. Thermal insulation boards for heated presses in wood and plastic processing. Heat protection boards, pressure-resistant insulations for heated presses. Common insulating materials for thermal insulation boards: DuroBest® 200/230/250/280 approx. 1000 x 2800 mm K-Therm® AS 600M / AS 800M approx. 1000 x 1200 mm, special lengths available upon...

...The short-wave thermoIMAGER TIM M thermal imaging cameras are mainly used in the metal processing industry. Due to its short-wave measuring wavelength, these infrared cameras are ideal for temperature monitoring during melting, hardening and forming processes.

... processing industry as well as in manufacturing trade and logistics. It is perfectly suitable for dispatch and stock labels. In combination with the Bizerba weighing technology it is the perfect starter kit for manual price labeling. Printing process:Thermal direct (optional thermal transfer) Resolution:8 dot/mm (optional 12 dot/mm) print width:56 mm (optional 80 mm) Print speed:max. 250 mm/s Label output:80 mm Label roll:Core 40-76 mm, outside max. 150 mm Thermal transfer ribbon :Core diameter 25.4 mm Outer diameter 81 mm...

...Marking, identification, preliminary processing in a harsh industrial environment. Uncompromising print heads. The next generation is here. Increased speed, reduced wear rate. A head start that matters to our customers Initially, it was two requests from our customers that drove us to further enhance our robust and legendary REA JET large letter print heads: — Doubling the previous speed...

... , the corresponding labels are printed and the correct ferrule is crimped to the wire with the UNIC-GV universal crimping machine. The thermal transfer printer (THM-MMP) is suitable for all markers and labels of the MultiMark family as well as for continuous material, fabric and polyester labels, heat shrink tubing or PLC labels. The operation of the individual steps is carried out manually, which allows the operator to route and connect the wires for the complete job in the switch cabinet wire by wire. Due to the high level of automation it is not necessary to change wires and ferrules.

... connectors, welding flanges, weld-on nipples, pipe angles, hose pipes, groove couplings, reducing couplings, reducing pieces, Housings and valve bodies for valves, high-pressure valves, stainless steel valves, nuclear valves, shut-off valves for the energy and chemical industry, food processing, energy plants, thermal power plants, hydrogen applications, highly corrosive media, seawater, acid-resistant...

... separation in machine, plant, and dryer construction. Processing The panels can be processed using woodworking machines. Due to the high strength values, carbide-tipped tools should be used. Appropriate dust extraction should be provided. Using modern, computer-controlled processing machines, we manufacture customized parts according to your specifications. Surface Treatment The SILCAPAN panels are predominantly used in the dryer sector.

...We see ourselves as a full-service provider in metal processing, our mechanical machining completes our range of services. The mechanical machining department rounds out our offerings as a full-service provider. This includes drilling, countersinking, cutting, reaming, riveting, sawing, and stud welding. Special features: Straightening: Reduced thermal distortion in welded assemblies. Edge...

...In the field of thermal technology, we provide devices and systems for cooling and heating liquid and gaseous media. These products are used by our customers: • Industrial furnace construction • Operators of industrial furnaces • Steel processing industry • Process engineering • Electrical industry • Breweries...

...Depending on the size of the area to be treated and the number of devices required, it may be beneficial to use a power distributor as well as one or more SCRAMBLER SC 6000 units to save energy. - Specifically developed for large spaces, such as mills, bakeries, and food processing companies - Often used in the processing of spices and coffee, the tobacco industry, muesli production, and the manufacturing of pet food.

...The servomotor-driven cutting clinching system from ECKOLD for automated manufacturing. Cutting clinching is a joining process for connecting sheets made of a soft and a high-strength material (e.g., aluminum and steel). This element-free joining technology does not require auxiliary joining parts and is a cost-effective alternative to punch riveting. • No pre-drilling required • No thermal...

... belt is driven by a powerful stepper motor with constant speed. The conveyor belts are provided with crossbars at regular intervals to achieve constant product guidance and thus a consistent print result. The distance between the two toothed belt conveyors can be easily adjusted in order to process different product widths. For processing slightly slanted products, the positions of the crossbars can also be adjusted to each other. Products:flat products Weight:32 kg max. product width:300 mm...

...Our flexible textile heating mats are custom-made for each customer. - Our aluminum-coated, custom heating mats with fiberglass as the carrier material are flexible and ultra-light, yet very durable. The backside can be coated with an adhesive to facilitate application and further processing. To ensure operational safety, we also use thermal switches or temperature sensors if needed. Advantages...

... electronics, which detect the signal with a sampling rate of 10 kHz. Sensor-specific deviations such as non-linearity, hysteresis and temperature errors are compensated actively. Features: — nominal pressure: 0 ... 100 mbar up to 0 ... 600 bar — accuracy: 0.1 % FSO — internal sample rate 10 kHz — excellent thermal behavior — excellent long term stability — extremely short response times ≤ 0.5 ms Optional Features: — customer specific versions...

...{"Properties":"• TOX patent: processing possible without pre-drilling or special tools\n• Effectively prevents thermal bridges\n• No pressure load on the facade\n• Quick processing and immediately loadable\n• Reinforced anchor neck prevents possible twisting\n• 100% nylon\n\nDescription & Application Area\n• Insulation anchor with coarse, conical thread and flat head drive TX40\n• Suitable for chipboard screws Ø 4.5 - 5.0 mm\n• Large length range"}...

...HS-wendelrohr cartridges are particularly suitable for use in hot runner technology and many other thermal processing processes, where high electrical heating performance is required in the smallest installation space.

...On our machines, we cut sheets up to the following thickness: Stainless steel up to 25 mm Structural steel up to 25 mm Aluminum up to 15 mm As a thermal cutting process, laser beam cutting has a firm place in industrial manufacturing. Parts produced by laser cutting can generally be used without further processing. In contrast to flame cutting or plasma cutting, the heat-affected zone is very...

...Heating elements for oven construction and the solar industry. The production of high-purity silicon (polysilicon) for the solar industry and subsequent manufacturing steps such as block melting processes, single crystal growth, and wafer processing are inconceivable without the use of graphite and CFC materials, which have specific properties suited for high-temperature processes. GTD processes...

...Heating of nozzles in plastic processing and other process engineering applications, requiring minimal space Plastic seal Especially stable connection Long service life Rapid heating and heat transfer Uniform heat distribution Nozzle heating bands are used for heating gases, liquids, and solids.

...The IPROLENO_180 is a twisting fabric made from basalt filaments. The twisting fabric IPROLENO_180 is a temperature-resistant twisting fabric and is primarily used in the composite sector. The IPROLENO_180 offers high thermal load capacity, is electrically insulating, and also exhibits high resistance to acids and alkalis. The silane finish of the basalt filaments allows for excellent sliding properties of the resin.

...Heating of tools and molds in plastic processing machines, packaging machines, and other process engineering applications...

...The mineral-insulated tool heaters type BDM/RAM/BM are used on tools in extrusion, injection molding, and other facilities for demanding processing. Max. operating temperature: 450°C Max. power density: 5 W/cm²...

...Falling Film Evaporator; Fixed Tube Heat Exchanger; Floating Head Heat Exchanger; U-Tube Heat Exchanger We manufacture a wide variety of heat exchangers for you, such as: - Falling Film Evaporator - Fixed Tube Heat Exchanger - Floating Head Heat Exchanger - U-Tube Heat Exchanger The heat exchangers can be produced by us in various material combinations, ranging from structural steel to high-quality nickel alloys and even titanium. The processing of explosively clad materials is one of our specialized areas.

...Heated PTFE twin hose for polyurethane foam processing.