steels- nickel Germany

...Deep drawn cylindrical battery housings made of nickel plated steel Various standard sizes of cylindrical battery housings for edrive applications like 21700, 46800 ...

...-resistant nickel and copper superalloy, particularly suitable for chemical applications, seawater, and high-temperature environments such as rocket engines (63% Ni). forged parts by stamping and molding: unit weights from 200g to 130Kg all forgeable steel grades: stainless steels (F316L, duplex), nickel-based alloys, superalloys, titanium according to the following standards and certifications...

The company ShenZhen PromoStar Hardware Co.,Ltd specializes in CNC metal processing, turning, milling, stamping, and welding products for all industrial sectors. We use materials such as stainless steel, aluminum, titanium, brass, or carbon steel. We meet every industrial need, e.g.: electrical appliances, electronics, vehicle parts, LED lighting, furniture, machinery & equipment, cleaning technol...

...1) The most commonly used geometry for stainless steel is sheet metal. 2) Thickness: 0.5-50 mm, Width: 1000-2000 mm, Length: 2000-6000 mm. 3) Materials used: Chromium-nickel steels, e.g., 1.4301 (AISI 304), 1.4401 (AISI 316). 4) Applications: Stainless steel is used in the food industry, medical technology, construction, and chemical industry. Based on customer requirements, we offer various dimensions and surface qualities to meet specific technical and aesthetic needs.

...SPIROL manufactures Coiled Spring Pins out of 316 stainless steel to meet specific application requirements. Type 316 stainless steel is similar to 302/304 stainless steel with a slightly higher nickel content and the addition of molybdenum. The molybdenum content increases the chemical resistance of this alloy greatly. 316 exhibits superior pitting resistance against sea water, acetic acid...

... control also helps protect the saw blade, ensuring even greater economy through a long tool service life. By using a servo feed system, a high cutting performance is achieved when sawing tool and stainless steels and materials such as Hastelloy or Inconel with difficult machining properties. A highly efficient chip brush system cleans the saw blade on both sides from any adhering sawing chips. Type:stationary Technology:band Treated material:for steel,aluminum,non-ferrous metals Other characteristics:high-accuracy,high-performance...

... Surface treatments may be done as follows: Galvanizing, nickel, brown, hot-dip galvanizing, phosphating, anodizing, chrome plating, painting, powder coating, plasma coating, sandblasting, Tuflok coatings. All common surfaces as VDA standard are possible (zinc-nickel, zinc flake). Heat treatments such as Plasma / gas nitriding, carbonitriding, hardening, carburizing, vacuum hardening, tempering etc. Strength classes:3.6 - 12.9 Materials:all major machine materials...

... 1.4597) AISI 304 (V2A) DIN 1.4301 (X5CrNi18-10) This is the standard for austenitic stainless chromium-nickel steels and the first commercially available stainless steel (currently accounting for a production share of 33%). It is a steel with medium corrosion resistance and good cold formability. The relatively high carbon tolerance poses a certain risk of chromium carbide formation at the grain boundaries during thermal treatments, which deteriorates resistance to intergranular corrosion. Solution annealing is then necessary to dissolve the carbides, followed by rapid quenching to prevent any new...

...Very small water-cooled and thus powerful 20A micro-plasma welding torch for plasma welding of films, wires, and screens made from high-alloy steels, nickel, copper, and titanium alloys with thicknesses ranging from 0.05mm to 1mm. Since the arc forms extremely stably even at minimal welding currents, this 20A series is ideally suited for the sensitive welding of the finest wires and films.

...tungsten, molybdenum, ceramic, silicon, nickel alloys, or titanium, as well as non-ferrous and precious metals with high precision. • Performance features we can offer you in cutting and drilling: • Tolerances and contour accuracies < 0.01 mm • Cut seam widths and hole diameters starting from 30 µm • Material thicknesses from 0.005 to 4 mm • Angled cuts and angled drilling up to 65° to the vertical plane • Minimal heat-affected zone...

... alloyed materials are used where the highest demands for corrosion resistance and/or high-temperature strength are required. Thus, we offer a wide range of application-specific alloys for various industries and markets. The comparable cast alloys of these forged alloys are rarely standardized. Corrosion-resistant nickel cast alloys are standardized in the American regulations, while there are no national specifications for heat-resistant nickel cast alloys. Therefore, in our...

...Automatic turned parts from 1-65 mm CNC turned parts from 2-300 mm Long turned parts from 1-65 mm Multi-spindle parts from 2-65 mm CNC ring manufacturing from 1-6.5 mm From all machinable materials: Automatic steels Quenched and tempered steels Stainless steels Aluminum Brass Plastics Special materials With all types of finishing: Hardening Grinding Rolling Honing Bluing Zinc plating Nickel...

... various materials such as brass, chemically deposited nickel or in selected hardened steels.For the replicating production of optical components, ultra-precise mold inserts made of steel are of particular interest due to their very long service life compared to other materials. In order to avoid the final polishing, which often leads to an undesirable change in shape or which is impossible due to a high structure density, LT Ultra offers ultrasound-assisted machining of steels with geometrically defined cutting edges made of monocrystalline diamond.

...High-quality linear guides, absolute position measurement, and a unique control concept combined with continuous monitoring of laser beam quality over a processing area of 3,000 x 12,000 mm – the result is cost-effectiveness and high precision without retooling, even with oversized dimensions! Schages part dimensions: – Length up to 12,000 mm – Width up to 1,500 mm We process additional materials: – Unalloyed and low-alloy quality steels – Chrome-nickel steels – Hardened steels – Wear-resistant steels – Spring steels – Fine-grain construction steels – Special materials upon request...

... resistance. This allows for high-precision preparation of pipe ends made from unalloyed, low- and high-alloy steels with a high chromium-nickel content, particularly... Drive versions: Electric, compressed air, or compressed air/auto Country of origin: Germany Machine weight, approx.: 4.1 kg - 5.1 kg (depending on version) Pipe ID, BRB 2 - Kit 1: 12.75 - 25.5 mm Pipe ID, BRB 2 - Kit 2: 19.1 - 47.0 mm Type: BRB 2 Wall thickness, min. - max.: 2 - 8 mm...

...Welding filler materials for laser welding and TIG welding Welding filler material Hastelloy nickel-based alloy And other alloys, such as: superalloys, cobalt alloy, pure nickel, Inconel, duplex and super duplex, STAVAX, 17-4 PH, Ampcoloy, CuBe Contact us, we look forward to your inquiry. Diameter: 0.2-1.0mm Delivery form: steels/spool Welding filler material: Hastelloy nickel-based alloy...

... • Average roughness value Ra 0.1 µm or even less Materials suitable for polishing include chromium-nickel steels, such as 1.4301, 1.4306, 1.4401, 1.4404, 1.4435, 1.4436. The electropolishing capability and the polishing result depend on the shaping and pre-treatment of the parts to be processed. We are happy to advise you on the various possibilities.

... Food-safe: Suitable for contact with aqueous and acidic foods and complies with the provisions of Directive 2002/72/EC and Regulation 1935/2004/EC, as well as the LFGB 2005. Areas of application: - Drop baskets for filter elements - Measuring and testing instruments - Plant engineering - Meter and manometer housings - Plug and socket housings - Sanitary and residential areas - Technically decorative surfaces - stainless steel look Base materials: - Steel, alloyed steels - Cast iron - Non-ferrous metals - Aluminum - only with NiDur pre-nickel plating...

...Nickel Base - Welding electrodes ...

...Available as rings, bands , stripes or coils for all OEM specifications i.e Samp, Henrich Niehoff..-Nickel (99,2%) Copper / Elmedur in a highly demanding quality cut to exact diameter with precisely cut ends or over lapping ends, exact fit , even roundness, fast and easy exchange , reducing costs due to the very high material ...

...Stainless steels: - Austenitic - Ferritic - Martensitic - Duplex Special steels: - Nickel alloys - Titanium...

...EWM welding consumables for MIG/MAG welding Welders can choose between different welding rods with different diameters and materials to work with: — unalloyed steels — low-alloy steels — high alloy steels — Nickel-based materials — aluminium alloys — Copper-based materials — Hardfacing...

...The specialist for: • rust and acid-resistant steels • heat-resistant steels • cold and hot work steels • quenched steels up to 1900 N/mm² • nickel-based alloys • aluminum-silicon alloys • copper-nickel alloys • titanium and titanium alloys • exotic, hard-to-machine alloys...

... push-down or pull-down designs, two- or fourcolumn designs with oil-hydraulic or water-hydraulic drives. High-stroke frequency contributes to the eciency of these presses. Our customers produce bars, discs, rings, and anges from materials such as steel, high-alloy steel, nickel-based alloys, titanium, and aluminium on these presses. They prefer to order turn-key plants including integrated manipulators, turntable, die magazine, and die-changing system.

... grades, duplex materials, and nickel-based alloys. A wide range of machining equipment allows for the turning and drilling of rings and flanges up to an outer diameter of 6,000 millimeters. Our production spectrum includes flanges according to the standard series DIN 28031 to DIN 28038, as well as custom solutions based on customer drawings.

... measurement With us, you can rely on the high-quality processing of the following materials: - All aluminum alloys and non-ferrous materials such as copper, brass, nickel silver, bronze - Stainless steels: including V4A, V2A - Titanium - Steel materials - Plastics/PEEK...

...We stock over 25,000 items in our extensive standard parts warehouse, covering more than 2,500 square meters. The range of materials includes automatic steel, high-strength materials with strengths from 8.8 to 12.9, stainless steels, brass, and plastics. Surface treatments such as galvanic zinc plating, hot-dip galvanizing, nickel plating, zinc coating with thick-layer passivation, and zinc...

... high layer thicknesses using 500 W, 700 W, or 1000 W fiber lasers, users of the EP-M450H are a step ahead in the field of additive manufacturing of series-produced components. Build volume: 456 x 456 x 1080 mm³ Material: Titanium, aluminum, nickel-based, cobalt-chromium alloys, as well as tool and stainless steels, etc.

...Welding Wire MT-308LSi 1.4316 MTC BS300 15kg Spool Welding rod/wire electrode made of chromium-nickel steel with a particularly low carbon content for TIG or MIG/MAG welding of stainless and cryogenic austenitic steels for operating temperatures up to +400°C; ductile down to -196°C. Approval: TÜV, DB + CE...

...-resistant stainless steels, as well as aerospace steels, tool steels, tungsten and magnesium, copper and brass, plastic semi-finished products, and hard composites (e.g., epoxy resin-bonded fiberglass composites).