steel ball Germany

...1) Most common geometry: Radial 2) Thickness [mm], width [mm], length [mm]: Thickness 5-20 mm, width 10-50 mm, diameter 10-300 mm 3) Materials: Chrome steel, stainless steel 4) Uses: Mechanical engineering, automotive industry, electric motors The exact specifications depend on the specific requirements and structural conditions.

...Ball bearings made of stainless steel...

... variant available. Areas of application: Switching speed not critical, suitable for long-term switching states, high flow rate, low susceptibility to particles. Lifespan: 50,000 switching cycles, easy replacement of the actuator, high-quality materials, and reliable sealing. Technical Data: FSA Motorized Ball Valve Set Stainless Steel 304 3/4" 9 - 28V Actuation: Open/Close Switching time: 8...

...Franke bearing asseblies type LVC are bearing assemblies made of steel, designed as double row angular contact ball bearings with integrated bearing elements. Franke LVC are suitable for highest circumferential speeds. They convince by very high dynamics and a very low rotational resistance. The double row angular contact ball bearings in a 4-point arrangement are preloaded. They are insensitive...

...Your internal geometry ensures very high axial stiffness, while a split and matched inner ring configuration provides a play-free installation condition for the axial angular contact ball bearings. Features of the ZKLN bearings: - Typically made from chrome steel rings and steel balls. Other materials (e.g., X65Cr13 or X30CrMoN15-1) are also available, as well as hybrid versions with ceramic...

RIKU is a company with 30 years of experience in the field of ball processing. For solving new tasks using high-tech products, cooperation between the user and the manufacturer is an important prerequisite. To this end, we offer our customers comprehensive consulting. The balls according to DIN 5401 can be processed from quality grade G10 to G100. In addition to standard ball materials, we are ca...

...Ball Valves - Stainless steel ball valve D325...

...Quality meets performance - that’s WESA ball valves and industrial fittings. The material stainless steel is becoming increasingly important. Stricter requirements for installations make stainless steel a true alternative to brass. Stainless steel is hygienically safe, has high mechanical strength, and with proper installation, corrosion is practically no longer an issue. Each fitting has its...

... steel Cover: Galvanized steel, stainless steel Support balls: Tool steel (hardened), stainless steel (hardened) Load ball: Tool steel (hardened), stainless steel (hardened), plastic Operating Conditions Temperature range from -30°C to +100°C (up to +30°C for plastic load ball) Conveying speed up to 1.0 m/s. dynamic load ratings up to a maximum of 225 kg.

...Material: Stainless steel 1.4301 (equivalent to AISI 304), 1.4305 (equivalent to AISI 303) or aluminum. Finish: Polished. Form C: Thread Form K: Hole...

...steel (42CrMo4) or stainless steel (1.4571) PTFECompoundseal builtin ball guiding tracks similar to ball bearings swiveling, rotating movements with low speed PRESSURE MAXIMUM Steel 42CrMo4 100 bar DN 150 (6") DN 200 (8") DN 250 (10") DN 300 (12") 250 bar DN 65 (2 1/2") DN 80 (3") DN 100 (4") DN 125 (5") 350 bar DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2") DN 50 (2") Stainless steel 40...

...Ball washers / cone washers are used as spacers in a screw connection to compensate for non-parallel surfaces.

... obtainable strengths. Metering rods Ejector pins Fittings Ball bearings/Overrunning clutches >> Current alloy surcharges >> Current scarp surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round) Max. bar length 7,000 mm (6.0 mm to 16.0 mm round) Max. bar length 9,000 mm (> 16.0 mm round and on request) Length tolerance ± 25.0 mm Grinding From 0.5 mm to 32.0 mm round, tolerance zone IT 6 (Rm up to 1,600 N/mm² for bright steel for standard parts) > 32.0 mm to 60.0 mm...

...Belven is a manufacturer of swivel valves based in Belgium, operating for over 40 years. As a leading distributor, Ahrendt Industrial Valves also carries out the automation of the valves with pneumatic or electric swivel drives in its own workshop. In addition to the Belven shut-off valves BV10 and BV12, high-quality Belven ball valves type BV4 made of steel and stainless steel are also available, featuring extensive certifications such as ATEX, Nace, TA-Luft, ADR, and SIL or fire safe.

...Ball Valves Pneumatic ✓ Ball Valves Electric ✓ 3-Way Ball Valves ✓ Drinking Water & Gas Ball Valves DVGW ✓ Compact Ball Valves ✓ Flanged Ball Valves ✓ Socket Ball Valves ✓ Welded End Ball Valves ✓ Special Materials. Nominal Sizes: DN8 - DN200 (1/4" - 8") Connection: Flange, Thread, Welded End Length: DIN, ASME Material: Stainless Steel, Steel, Ductile Iron, Brass, Duplex, Super Duplex, Hastelloy Standard: DIN, ASME Ball Seat: PTFE+Glass Fiber, TFM1600, TFM4215, PEEK Actuation: Hand Lever, Pneumatic, Electric, Spring Return...

...Since 1999, we have been manufacturing ball-catching curtains in-house, perfectly color-matched to the two-tone tennis surface, giving an old tennis hall a fresh new look. The ball-catching curtains are custom-made in our facility from high-quality polyester fabric (fire class B1). They are hung using carabiner hooks on steel cables. Renovating your tennis hall with a two-tone tennis surface and...

...Ball tension screws with a full ball are used when a point-like pressure point is desired. Execution: Steel strength class 10.9 (blackened) or stainless steel; ball hardened and polished. Ball tension screws with a full ball Execution: Steel strength class 10.9 (blackened) or stainless steel; ball hardened and polished. Ball tension screws with a full ball are used when a point-like pressure point is desired.

...Stainless steel ball valves with threaded ends, welded ends, or flange connections. Available in 1-piece, 2-piece, or 3-piece designs with reduced or full bore. For example, a 2-piece flange ball valve according to DIN 3202-F4/EN 558-1 in stainless steel 1.4408 (AISI 316), PN 40 with full bore. Available in sizes DN15 to DN100. The ball valve can be opened or closed using a hand lever. The hand lever is rubber-coated and can be locked (in either the fully open or closed position). Suitable for pressure ranges up to 40 bar (temperature dependent).

...Steel of various quality classes and different precision levels ensure the required quality of the bearing. Depending on the requirements, corresponding oils or greases are available. There is also the option to use ball cages and dust covers made of plastic or steel. • The ball bearings can be supplied with integrated rivets or screw bolts. • If necessary, eccentric machining can be carried out for shaping. • Furthermore, a galvanic coating of the parts is possible.

...Steel sheet ball rollers offer good running behavior and low weight at low costs. The top shape with a right-angled flange allows for easy installation by simply inserting it into a loosely tolerated hole. Often, no additional securing is necessary. The Saturn ball roller has a shallower installation depth and features additional mounting holes for fastening. Load capacity C: up to 890 N Ball diameter: up to 38 mm...

...Instrumentation Ball Valves for Gas and Liquid Applications The 2- or 3-way ball valves of our BV series are made from a stainless steel forged body and feature a floating ball. This ball is secured between two packing half-shells. This design feature helps reduce wear. Various packing and sealing materials are available as options for maximum working pressures of up to 414 bar and temperatures up to 232°C. Control panel nuts are pre-assembled as standard. Standard materials include stainless steel 316 or brass, with others available upon request.

...Made of brass, steel, stainless steel...

...Single-piece compact ball valve with flange connection, full bore Size (DN - inches): DN 40 (1 1/2")...

...Flanged Ball Valve KFK Series...

... runners. • High travel speeds The Eco System linear units are offered with two guidance systems: Eco System SP Inside the aluminum profile, there is a maintenance-free ball recirculation linear guide. Eco System CI Four rollers with a gothic track profile, guided on two hardened steel round rods that are embedded inside the aluminum profile. Main applications of the Eco System linear units: • Automation • Packaging machines • Industrial machines High dynamics: V = 5m/s, A = 50m/s² High repeat accuracy: ± 0.05 mm Available sizes: ECO 60, ECO 80, ECO 100...

...We manage and automate a comprehensive range of industrial valves. We are your competent contact when it comes to automation under complex requirements! - Ball valves made of stainless steel, brass, or steel - Shut-off valves with PTFE or soft sealing - Slide valves - Check valves - Special valves etc.

...Ball for cleaning systems made of stainless steel...

..."Ball bearings with a material combination of bearing steel (inner and outer rings) and ceramic (balls) are called ‘hybrid’ ball bearings. All GMN ball bearings can be supplied as hybrid ball bearings. The material characteristics of ceramic balls in hybrid ball bearings result in significant increases in machine performance (in comparison to ball bearings using steel balls), especially under critical conditions.

...The needle marker is equipped as standard with a high-quality marking tool – consisting of a solid carbide marking needle and a maintenance-free needle head. Thanks to high-quality guides combined with self-lubricating sliding and ball bushings, the marking head is maintenance-free and offers optimal wear characteristics. The marking area can be illuminated via an energy-saving LED rail.

...The High-Z T series is based on ball screw technology for maximum precision, power, and speed. Suitable for both private and commercial use. The backlash is only 0.015 mm, and the repeatability accuracy measures just 0.01 mm. With the additionally installed HIWIN linear guides, the High-Z/T series achieves maximum stability of the X-axis. You will also receive the full version of the design...