pressure tank Germany

... threads, a butterfly valve, and a solenoid valve. Additionally, the fermentation tank has Tri-Clamp connections for CO2, a yeast discharge, a clear drain, as well as an insulated, cooled cone with an angle of inclination of 72 degrees. An integrated CIP ball allows for 360° spraying. The working pressure is limited to a maximum of 2.2 bar and is regulated by a pressure relief valve and a vacuum valve. Furthermore, a pressure relief device and a hop dosing chamber for dry hopping are integrated. The connections can be executed as either Tri-Clamp or milk pipe fittings.

... nozzles...) as well as the option to retrofit it with an FSSA sole spraying beam for winter service. This allows for effective use of our diverse tank systems throughout the year. Tank volume: 230 to 17,600 l Pumps: Low/Medium/High-pressure pumps Design: Flexible cascade design...

...Volume 90ml/min (50Hz) 15 Bar with safety valve 200V 1/0.8A (50Hz) Oil level switch A-contact (NO) ON at low level. Pressure switch A-contact (NO) type closes at 13 Bar opens at 9 Bar. AC DC 250v/2A runtime MAX 1min. Min. interval time 3min. Viscosity 50-1300mm²/S (50Hz) 3L tank external protection 200V/1.0A...

... equipped with lifting eyes for easy transport and are also available optionally as trailers. Effortless control is provided either through manual pressure regulation or a dump-gun pistol. A large feed tank ensures a smooth water circulation. Due to long idle times, minimal maintenance effort, and easy upkeep, the high-pressure pump units of the Classic series can also achieve low operating costs in the long term. Category: High Pressure Energy: Diesel-powered Configuration: Stationary...

... volume max. 15 cm³ Frequency up to 10 Hz Pressure change as sine & trapezoidal wave (depending on the expansion volume) Safety test chamber with automatic door Media preparation with dirt & clean tank Feeder for pressure change testing Complete electrical equipment for pressure tests Hydraulic unit with Moog RKP and 55 kW Temperature range: -55°C…+160°C (without climate) Temperature change rate...

...Cylindrical 1,000-liter stainless steel tank with frame. Featuring a 400 mm manhole and screw cap. Bottom outlet with various hose couplings as connection options. Suitable for lubricants, solvents, and other products. Volume: 1,000 liters Material: Stainless steel DIN 1.4301...

...-optimized design and easy installation * self-priming (even in dry conditions) * absolutely oil-free * blockage-free operation * pumps explosion-proof according to ATEX directive (Ex protection) * The maximum flow rate is a determined value measured using a test stand with water at a medium temperature of approximately 20° C. The measurement is taken at the pump's pressure port, without hose, dispensing nozzle, or flow meter.

... Draining small towns with up to about 3700 residents which cannot be drained using natural gradient or as an intermediate pumping station within the context of a pressure drainage system Residential and industrial areas Towns Communities Infrastructure facilities such as airports, industrial parks, underground stations etc. Product features One holding tank with two separator systems Two...

...—Hydrostatic submersible probe for continuous level measurement up to 20 meters with analog output —Measuring probe is inserted from above; the cable can be routed along the tank wall —For high tanks with agitators —Suitable for adhering, contaminated, and highly viscous media —Independent of foam formation and media movement —For continuous level measurement...

...The rotary and swivel drives of the NEx series meet the requirements of Ex Zone 1 marking CE2004 EX II 2G Ex d IIC T6 Gb. The drives have the following IECEx and ATEX certificate numbers: IECEx EPS 15.0061X and EPS 15 ATEX 1 044 X. They are predominantly used in industrial plants, e.g., in machines of the chemical industry, in refineries, in tank storage facilities, and in painting systems. 230 V...

...The withdrawal system can be used to dispense high-purity liquids quickly and without complications. An excess pressure is produced in the container with pressurised gas (compressed air or nitrogen), thereby pumping the liquid out of the tank. The advantage of operation using pressure gas is that the user can extract even large amounts without effort while having both hands free to dispense the...

...The ViscoTec Hydro Storage provides you with the simplest way to operate a seamless production without interruptions due to container changes. Typically, it is integrated into the pipeline between material supply and dosing unit, acting as a small buffer tank. Your advantages: - Supply pressure reduction in high-pressure supply - Optimized material throughput - First in - first out - Compact...

... welding only. The largevolume, above ground storage tanks are fitted with all necessary safety and operation equipment. Additional, individual components according to client’s specification can be considered. The roof and wall insulation is individually adapted to local conditions. The LIPP® Thermal Storage Tanks operate at atmospheric pressure, at a temperature of up to 95° C and are suitable...

... closed. The lid opens with the help of a gas pressure spring and can be closed with plugged-in connectors. Further configuration variants on request. Equipment:CEE16, CEE32 Design:rectangular Ground:Screed Protection:IP40, IP67 Material:Aluminum, Stainless steel Color:Stainless steel Surface:sanded...

...engine spare parts, steel valve, pipe connector, pipe joint, forged chain, forged link, tracked vehicle, crawler, weapon, pistol, rifle, cannon, tank, naval ship, submarine yard, nuclear reactor, core reactor, pressure vessel, agricultural machinery, shredder, wear part, hook, eyelet, special screw, flange, special flange, custom flange, specialty part, special part, device, machine part...

... performance. Manufacturer: HZC Power GmbH Model: BZR520K Engine: Briggs & Stratton (10 HP, gasoline, XR1450, 306 cc) Gasoline tank capacity: 6.5 liters Cooling: Hydraulic oil cooler Electric starter: 12 volts Maximum climbing ability: 25° Oil tank capacity: 19 liters (HLP46) Hydraulic pump: Gear pump Working pressure: 160 bar Maximum pressure: 210 bar Hydraulic flow: 30 liters per minute Digging...

... intrinsically safe Ex version completes the profile. Features — Nominal pressures: 0 ... 40 mbar to 0 ... 20 bar — Accuracy: 0.35% (Opt. 0.25%) FSO — Pressure connection G 1 1/2" for pasty and contaminated media Optional Features — Ex version Ex ia = intrinsically safe for gases and dust — Pressure connection made of PVDF for aggressive media — Separating membrane made of high-purity ceramic (99.9% Al2O3) — Custom designs...

...Waste oil disposal system for assembly pit diaphragm pump specification For the entire motor and commercial vehicle sector With pneumatic diaphragm pump (19 060), pump performance 55 l/min with free outlet, suitable for pipelines up to 20 m Saugschlauch, 2 m, G 3/4'' i/a (19 512) Pressure hose, 1.5 m, G 1/2'' i/a Wall bracket (87 626) With all necessary couplings, adapters etc. Tray (19 788), suitable for all standard pit profiles Product number:1517443 Container size:1 Product group:Miscellaneous...

... 2250","pressure tests":"Pressure tests","suitable accessories available":"Suitable accessories available","OEM quality":"OEM quality","Examination according to R34":"Examination according to R34","According to customer requirements":"According to customer requirements"}...

...Air couplers which are also known as air fittings are mechanical devices that connect air hoses to air tools or pneumatic equipment. They work by allowing the flow of compressed air from an air compressor or air tank to the air tool or equipment, which is used to power them. Our 20SH model is such an air coupler that can be used to deliver and transfer high pressure from an air compressor to its destination. Made with a larger body compared to its competitors in addition to its chrome-coated exterior, Ronix 20SH will be the last air coupler you will ever buy Model:20SH Max Pressure:10kgf/cm²...

... actual value. If the temperature should be measured and controlled at a place with a distance of 25 meters away from the heater you can use the optionally available extern thermostat. The fuel level of the integrated fuel tank can be read on the fuel level display. Convincing practical advantages: Very economical solution for standard oil heaters Integrated fuel tank with fuel level display Electronic flame safeguard Overheating protection Stainless steel fire combustion chamber Integrated thermostat with a dual display for set value and actual value...

...The oil-lubricated 40 m³/h vacuum pump with a 270-liter vacuum tank, featuring a digital pressure differential control with automatic shut-off for up to three vacuum tables or multiple vacuum bags. Technical specifications at a glance: - Suction capacity: 40 m³/h, oil-lubricated - Vacuum tank: 270 liters - Digital pressure differential control with automatic shut-off - Max. vacuum: 99.9% - Connection power: 1.4 kW (400 volts) - Dimensions: 2020 x 720 x 820 mm (L x W x H) - Weight: 260 kg...

... protection areas and in buildings. Made of HDPE with integrated galvanized steel catch basin Features: Level indicator, optical leak indicator, integrated carrying handles, suction kit, 15 m filling hose, open hose reel, digital hand flow meter, holder, and drip cup. Pneumatic pump 3:1 (not calibrated) - Gear ratio 3:1 - Operating pressure 6 - 8 bar - Max. delivery rate 14 l/min - Compressed air connection ¼" IG, medium outlet ½" IG, suction connection 1" IG - Air consumption approx. 330 l/min - Operation only with maintenance device - Pumping medium oil up to SAE...

...guided wave radar TDR Media:: for solids Applications:: for tank Measuring range:: up to 20 m / 65.6 ft (liquids) and 10 m / 32.8 ft (solids) Process temperatures:: 100 °C / 212 °F Pressure:: up to 16 barg / 232 psig...

... - box serves as a containment basin (only for KT530 RR) - filling opening in NW 150, NW 54 venting with ball valve NW 50 (KT 530 RRA) - 4 fluoropolymer connections S 62x5 for suction pipe, return, filling, and pressure equalization with matching closures and an NW 54 opening (KT 530 RR)...

... Tension and pressure-resistant fabric inlays Concealed steel spiral Optional: Embedded copper wire Weather-resistant, abrasion-resistant, conductive CR cover Interior and exterior smooth, fabric patterned Supplied on rolls or cut to length. Other versions or dimensions on request.

...You can expect only the highest quality pressure and bright beer tanks from Kaspar Schulz. The new Pressure Equipment Directive 97/23/EC has been in effect since May 5th, 2002. Surveillance of the QS-System is carried out by TÜV-Süddeutschland (0036). Every pressure tank built by Kaspar Schulz complies with the AD-2000 technical guidelines, which ensures that the customer is spared of any long...

... built according to the applicable PED regulations, and are properly certified by TÜV, along with the pressure test certificate and tank documentation. Upon request, we also manufacture our fermentation / storage tanks with a cone bottom as Bright Beer Tanks or in a horizontal form. To optimally separate cold trub and beer, as well as yeast and young beer, our tanks are equipped with a double outlet. Our pre-installed temperature control system allows for quick commissioning and expansion of the tank storage without significant installation effort.

...Short pipelines from the tank to the evaporator and from the evaporator to the system Custom design and consultation for the right pipelines and pressure regulators tailored to your business...

...Tank gauges, oil pressure gauges, oil temperature gauges, boost pressure gauges, ammeters and voltmeters for additional installation. All items are from wellknown manufacturers in the field of display instruments...