flat head Germany

...Permissible dimensions: maximum width 500cm (minimum 60cm) maximum height 400cm (minimum 60cm) operation only possible with electric motor from 12sqm area Head profile dimensions (width x height in mm): 58 x 56 Select 80 mm (flat)...

... a socket head screw. Its head is recessed into the cylindrical sink. Product features to your advantage: 1. Increased holding force through a stainless steel cap with magnetic adhesion. 2. Shielded system with a ground holding surface. 3. For fastening: brass screws or steel screws.

...A special nozzle head with a flat flow channel inside shapes the compressed air stream into a spatula-shaped, flat jet and directs the jet particles broadly onto the surface to be cleaned. This allows for particularly high surface performance. The jet width ranges from 15 to 30 cm, depending on the size of the nozzle head. By using special blasting materials that vary in grain size and type, very different cleaning results can be achieved. Nozzle designation: Flat jet nozzle / Fan jet nozzle Nozzle material: Boron carbide nozzle Nozzle connection: Attachment with a union nut Nozzle size: 22 x 2.5 mm...

... the three main qualities: Wax – Thermal Transfer Films (contact - Micron): (Flat Head / Near Edge) Due to their optimal flow characteristics, contact Micron ribbons are ideal for printing on very rough and matte material surfaces. Especially on untreated paper, they achieve a high density of blackness, as well as a faithful reproduction of texts, barcodes, and graphics with very low energy consumption. Wax/Resin – Thermal Transfer Films (contact - Prestige) (Flat Head / Near Edge) The universally applicable contact Prestige ribbons have been specially designed for printing...

... installation of window frames and door frames. Suitable for more challenging substrates due to the larger expansion zone. Length: 112 to 182 mm Diameter: 10 mm Head shape: Flat head Drive type: Pozi cross slot Surface: galvanized blue Material: Steel Packaging type: Box Drill diameter: 10 mm...

...eber-pinsel Premium Flat Brush with red-white synthetic fiber special blend, shaped bristle head, curved stainless steel plate, and raw wooden handle The red-white layered premium synthetic fiber is particularly suitable for processing water-based paints and coatings (solvent-free) and allows for a smooth and clean surface finish without fiber residues. For solvent-based painting media, however...

...The popular single-head embroidery machines from the SPRINT series. The machines offer all operating modes such as flat embroidery, cap, and free arm. In the SPRINT series, models with 12 and 18 needles are available. The SPRINT models feature the smallest free arm available for industrial embroidery machines. This newly developed free arm provides greater space for embroidery work in areas...

...Flat Head Caps for covering screw heads Material: Soft PE (LDPE) Color: Black similar to RAL 9005 Item is also partially available in white from stock. Delivery time: approx. 3 working days...

...Flat head screws with super flat head <=1.2[mm] from M 2 - M 6 available from stock.

...Flat head screw for drywall. With nut and washer for stop angles and wide span carrier systems (M 8 x 20 mm)...

...RAMPA flat head screws type KF with internal hexagon and decorative flat head for visible connections.

...Suspension rings with and without flat spot for 1-2 strand lifting chains - Din EN 1677 4 G 8 suspension rings heads...

...Head for formwork prop: can be fitted on top of formwork props to hold the wood formwork support for which 4 corner angles are welded Tripod stand: the formwork prop can be fixed simply by a bracket that is supported movably on the tripod stand Formwork clamp: large size for stepless fixing by wedge. Eccentric clamp: for tensioning wire from 5 mm - 10 mm, load up to 2.500 kg Formwork clamp: made of 8 mm thick bent flat-bar steel. Wing nut WOF 27, casting, preferred use for grid-pattern formwork etc.

... compromised, leading to consequential damage. Expensive rework and repairs become necessary. Rust is preventable. SPAX stainless steel offers protection against corrosion! Special Features Flat-lying pan head Stainless steel A2 1.4567: high corrosion protection SPAX T-STAR plus: secure tool fit, no cam-out effect, optimal power transmission Features SPAX 4CUT tip: allows for screwing without pre-drilling (dependent on wood), reduces splitting, square shape displaces the fiber SPAX wave profile: extends to the tip - fast and secure screwing...

... gun with built-in injector nozzle, and venturi wide mouth – blasting nozzle and Compressed air connection nipples. 1 special distribution head for receiving the stencil, which are rapidly renewable, and the Recycling of the blasting agent in the container or in the filter element. 1 set = 4 pcs. Connecting hoses between blasting gun and containers or distribution head and the container. Material:steel, plastic Surface:powder coating...

... components can be ground using magnetic clamping on the magnetic table, a swiveling magnetic plate, or clamped in a vice, clamping prism, chuck, or a specially made clamping device. This also enables us to process non-magnetic components. Furthermore, we also perform the resurfacing of a cylinder head or manifold for our local car dealerships or "hobby mechanics" upon request, ensuring they regain a flat seating or sealing surface.

... and economical connecting pins that allow for adhesion assembly - Simple attachment of accessories with a hammer head - Frame thickness of only 7.5 cm → Low storage and transport volume - The flat steel frame guarantees robustness and longevity - Pressure resistance of fresh concrete of 50 kN/m² - Compatible with all PASCHAL systems Technical data Element widths: 90/75/60/45/30/15 cm Element heights: 150/90 cm Large surface element: 180 x 300 cm Formwork frame thickness: 7.5 cm...

...By using our coaxial laser welding head wireM, the welding process can be carried out independently of the direction, so that the coatings can be applied not only to rotationally symmetrical but also to flat and freely formed component surfaces. By selecting the wire filler material according to the requirements, the achievable coating properties can be adapted to the desired requirements...

... plants. All advantages at a glance * Flat mixing head * Optimized suction * Dust protected machine components * injection through mixer shaft * different container sizes on one mixer * Reduction of cleaning times * Lifting device with container positioning * High flexibility * New tools for more efficient mixing * Lower energy consumption * No base plate...

...Spacer sleeves and tube rivets in various dimensions and materials. Custom and order-specific. Do you need spacer, tube, or distance sleeves? We manufacture a wide range of tube and sleeve products made from steel and stainless steel, also with galvanic zinc coating as a surface treatment. The diameters can range from 8 to 40 mm with wall thicknesses starting from 1 mm. All products can be supplied with or without flanging (flat head).

...Filter bags in all dimensions and designs • Head: cut edge, cord, wire ring, snap ring/double bead, sealing felt • Bottom: round, oval, flat • Long seam: triple or welded...

At our Blomberg-Donop location, we produce both customized solutions tailored to customer requests and our own developed product solutions for applications in the industrial sector. We feel at home in nearly every industry, allowing you to benefit from our cross-industry experience. Our clientele includes well-known companies and corporations, many from the furniture, automotive, electrical, and c...

...The controller consists of a switch head and a closed hydraulic system with a liquid sensor. The sensor must be in direct contact with the monitored medium. The temperature-dependent volume change of the liquid triggers the electrical switch. As temperatures rise, the switch opens its contact upon reaching the set temperature and automatically closes the circuit again after cooling down. Areas of application: flat convectors, hot water boilers, mini ovens, fryers, grills, etc.

... beam strikes the sheet and causes it to melt. Laser cutting is extremely versatile. In addition to flat materials, pipes and profiles can also be processed with laser cutting machines. Primarily, steel, stainless steel, and aluminum are cut. The thickness of the processed sheet metal ranges from 0.8 to 25 millimeters.

...the chair offers great safety and many treatment options even for adipose patients. Time-saving: Optimised adjustment speed and four freely selectable memory positions allow quick adjustment to the relevant position. Functional: The backrest can be moved to a horizontal position, with the leg plate flat patient positioning is possible e.g. for ultrasound. The deep gyn. cut-out of 155 mm offers...

... of the connection can be visually inspected without any tools. This is likely the most important reason why solid rivets are used in safety-critical applications that are subjected to high cyclic loads. The secure fit of the connection can be visually checked by the shape of the head's profile. Design - Half-round rivet according to DIN 660 and DIN 124 - Countersunk rivet according to DIN 661, DIN 662, DIN 6792, and DIN 302 - Flat head rivet according to DIN 7338 A - Shaft diameter: 1.0 - 24.0 mm - Shaft length: 3.0 - 120.0 mm...

...-printing method (print protected from abrasion) • Savings on multiple labels • Films made from PET, OPS, PLA, PVC, and more • High-quality HD UV flex Minimum possible flat width: 25 mm Maximum possible flat width: 330 mm...

... treads on prefabricated stairs with slip resistance R11 (according to test certificate) and as impact protection on pillars and building corners. Anchor design: Head bolt, corrugated flat steel, ribbed torsteel Nail holes: as per customer request, d=4 or 5 mm Profile design: welded, bent, or rolled Profile lengths: up to 6000 mm Profile thicknesses: up to 20 mm...

...Different compression geometries can arise. Various head and collar shapes, such as flat, semi-round, cylindrical, conical, or pear-shaped. Depending on customer requirements!!

...Tiltable, with ground sleeve for embedding in concrete. Installation depth approx. 500 mm. Product Type: Post Surface: Hot-dip galvanized and powder-coated, hot-dip galvanized and white powder-coated Number: Reflective strips Head Shape: Flat head Locking: Triangular lock Mounting Type: For embedding in concrete, for embedding in concrete with lifting-tipping mechanism Removable: Yes Tiltable: Yes Post Dimensions: 70 x 70 mm Height: 900 mm Recommended Installation Depth: 500 mm Drive-Over Height: 85 mm Weight: 12 kg...