special alloys France

... trays, and alloy wheels. FSW tooling for friction stir welding The STIRWELD response We have developed special tools for aluminum-silicon welding, which allow for over 400 meters of welds on these types of aluminum, representing a 300% improvement over standard quality. Cheaper (welding replaces bolting) Stronger due to the use of high-strength aluminum.

...SOPROMET expands its product range by offering tubes, rods, and sheets made from special alloys. The unique feature of these products is their high resistance to corrosion and heat in hostile environments. This list is not exhaustive; feel free to consult us for all your stock needs. Custom Service We can cut the material according to your requirements. Product certificates available upon...

...Highly corrosive products require special alloys based on Cr-Ni or special construction materials such as titanium or tantalum for parts in contact with the product. On the other hand, some products are metal-active and do not allow contact with metal. For the treatment of thermosensitive products under high vacuum and with short residence times, we offer thin-film and short-path evaporation...

... destroy microorganisms on contact. Being neutral, it does not cause corrosion of metals present on the treated surfaces (zinc, light alloys, gutter hooks...) COMPOSITION AND APPEARANCE Cationic compounds, algicides, wetting agents, penetration additives, and water-repellent agents. Clear and colorless liquid. PACKAGING 2 and 5-liter containers. 1-liter spray bottle. ADMISSIBLE SUPPORTS Compatible with most common materials: • Bitumen • Macadam • Quick • Stone • Granite • Marble • Cement • Concrete • Plastic • Rubber STORAGE 12...

...Lebronze alloys was born from the integration of companies specializing in the development and production of technical components made from copper alloys, copper, nickel alloys, aluminum, special steels, stainless steels, titanium, and nickel superalloys. The range includes semi-finished products (solid and hollow bars, profiles, wires, plates, strips...) to finished products across a wide...

RMS METAL, a foundry located in the Loire region, specializes in the production of cast parts. We carry out sand and shell molding work, as well as primarily lightweight aluminum and zinc alloys. We produce both small and medium series parts. We control all stages of production, from metal melting to molding, machining, and finishing, and we have dedicated equipment. We also demonstrate flexibilit...

...We manufacture finish machined rings or rough machined bushes in bronze, brass, copper alloys, special alloys...

...Gland bushing in bronze for hydraulic press, tubular plate in aluminium bronze, rollers, rotary feeder in stainless steel... Alloys: - bronze and brass - low allied and pure copper - aluminium bronze - aluminium - stainless steel - Ni-based and special alloys...

Since 1930, Fonderie Roger has been working with low melting point metals. Zamak (Zinc) and lead foundry with an integrated machining workshop. ISO 9001: 2015 certified company. Zamak Activity: Feasibility studies, co-design Pressure casting from 3 to 1000g, across all sectors. Integrated machining Mastery of finishing (painting and galvanizing). Assembly Lead Activity: Design Foundry and machin...

...We manufacture bottle molds & glass molds in special alloys based on copper-aluminum or copper-nickel-aluminum. The parts can be delivered raw, semi-finished, or fully finished.

...Rectified Carbide Rods for end mills, drills, and special tools, 9%, 10%, 12% Cobalt, in micro, ultrafine, or nano grain, ideal for machining steel, stainless steel, cast iron, aluminum, titanium alloys, etc. For about ten years, our carbide rods have been on the European market. They are available in stock at our partner factory in China. You can receive your order within 7-10 business days. We also always keep a portion in stock in France for your convenience. Feel free to contact us for more information. A free trial is possible!

...Phosphate Binder Coating without Graphite Designed to meet daily needs. Suitable for non-precious dental alloys. Advantages - Graphite-free - Quick firing method - Expansion up to 3% - Suitable for all alloys including Co-Cr - Technique with or without cylinder - High precision - Smooth surface - Easy demolding - Cost-effective - Durable How to use it? Can be used either with the final temperature firing method or in stages. Pay special attention to the technique without a cylinder. List Not available in France...

...' needs: Materials: practically all materials can be used. Among the most common: Steel, Carbon, Stainless steels (304L, 316L...), Special alloys (Uranus, Monel, Hastelloy...), Graphite, Plastics (PVC, PPH, PVDF, PTFE...) Construction codes and directives: LVI Standard, CODETI, CODAP, ASME VIII, AD-MERKBLATTER, CE Standards, TEMA, DESP... Connection: Upon request, Flanges (according to ISO, DIN, or ANSI standards), Threaded, tapped, or welded connections.

...mineral coatings based on cement or lime, stones, metals, and light alloys. It ensures deep penetration into porous surfaces, and its active functions allow for the devitalization of fungi, algae, mosses, mushrooms, and lichens. It disinfects surfaces embedded with plant microorganisms. Dylmouss exhibits residual effects due to the presence of active ingredients impregnated in the porosity of the substrates, particularly at the points of attachment or rooting of fungi. Physical state: liquid Density: 988 g/l ± 20 g/l Chemical reaction: neutral...

...Beal Inox is one of the few French manufacturers capable of machining special alloys and superalloys to create custom parts for industrial installations. Our experienced team is available to provide you with information on the manufacturing of fittings and valve components in Inconel®, Hastelloy®, Uranus®, and other superalloys.

...Special machining by 4-axis machining centers. CNC lathes. Grinding up to 13 m long. Drilling up to 13 m long. Straightening presses and hard anti-wear reloading. Machining large lengths over 10 meters or 31 feet and diameters up to 350 mm. Machining of stainless steels and inconel alloys. Custom machining. Subcontracting for medium and small series. Production of single parts according to plans...

... - APPEARANCE ———————————-Liquid INSTRUCTIONS FOR USE Apply with a brush or roller on all smooth, non-porous surfaces (painted sheets, lightweight alloys, plastics, etc.) It is used without the addition of water. 15 minutes after application, the treated surface acquires all the adhesive properties required to capture and trap dust that comes into contact with it. This product does not lose its tack even...

...Excellent plasticine that can be used in solid, softened, or liquid form. Excellent plasticine that can be used in solid, softened, or liquid form. It does not dry out and is non-toxic. It has good compatibility with silicones, polyurethanes, resins, plaster, cement, low melting point alloys, and synthetic marble. Characteristics: - Special quality plasticine. - It has excellent plasticity...

... challenges, whether they are metallurgical, technical, or logistical. Inconel, Monel, Hastelloy are registered trademarks of Special Metals and Haynes International, respectively. ID Alloys is certified ISO 9001 and EN 9120.

Marteau & Lemarié, a specialist in balls since 1922, markets all industrial balls available on the market. Although renowned for the quality of its precision balls, our company also supplies polishing balls or grinding balls. Our different types of precision balls: precision steel and stainless steel balls or plastic, and other precision balls (tungsten carbide balls, ceramic balls, glass balls, b...

Based in Beauchamps (80), APB is a manufacturer of cutting tools offering diverse solutions in the field of industrial cutting. Our services include the design and production of special rotary and flat tools according to specifications, maintenance of cutting tools such as drills, end mills, reamers, saw blades, and taps. We also ensure quality control through P.V., laser marking, wire cutting...

... modernized its production tools to also melt steel, stainless steel, and aluminum today. Every day, 50 professionals mold, cast, turn, or mill with great precision to ensure your parts have a perfect finish. From unit molding to series machining, Fonderie Péna offers you the most advanced technical and human resources to guarantee high-quality work. Fonderie PENA for ferrous metals to non-ferrous metals, and more specific alloys, please contact us.

... your studies, particularly in special metals (Tungsten, Molybdenum, Tantalum, etc.). It also includes the possibility of carrying out constructions, assemblies, or even welding in these special metals after prior study by its technical team. The service of Concept Metal is focused on customer satisfaction through the responsiveness and relevance of the answers provided, thanks to the skills of our...

... expertise to work together with your designers and developers to define perfectly suited aluminium profiles. The profiles are then put in the hands of the best European extrusion specialists. We carry a vast permanent stock of several thousand standard or special bars for your use.

DELTA MÉTAL is a supplier-manufacturer of copper alloys, special bronzes, Tungsten, Molybdenum, and Titanium. We also have the capability to produce parts according to specifications as well as large centrifuged crowns up to 5 meters in diameter. Our range consists of over 50 grades including: CuSn6P - CuSn12 - CuSn12P - CuSn7Pb7Zn4 - CuSn7 - CuSn9P - CuAl9Ni3Fe2 - CuAl10Ni5Fe4 - CuAl11Ni6Fe5...

The company COLIN MILAS is known and recognized as a specialist in the manufacturing of lifting rings and other high-quality lifting, securing, and handling accessories. Design and manufacturing of forged and machined parts. The processed materials include ordinary steels, special steels, stainless steels, aluminum alloys, and titanium alloys. We create specific products for our clients in...

Recycling and recovery of superalloys from production waste in the aerospace, defense, and petrochemical industries. Preparation of complex alloys for foundries and vacuum casting.

....). ZARGES, a leading group in the aluminum processing sector, has relied on the advantages of this material for decades. This has resulted in a wide range of boxes, cases, enclosures, baskets, trolleys, cabinets, and custom special constructions that help you solve your logistical tasks. Its reusable products with a long lifespan also contribute to environmental protection.

CAPR specializes in the trade of special steels and rare products.

The company ASMOBAX specializes in cutting tools and steels. Regarding cutting tools, we perform machining of all materials, KENNAMETAL carbide tools, high-speed machining with HAIMER attachment systems, and metrology. We work with special steels, aluminum, bronze, stainless steel, and technical plastics. Our main clients come from the fields of general mechanics, aerospace mechanics, and medical mechanics.