silicone sealing France

...This sealing plug is essential for making your polycarbonate molds airtight. It is reusable and very easy to install, which will save you time compared to sealing paste. To use this sealing plug, simply pass your drill bit through the hole of your polycarbonate mold, allowing the tip of the bit to protrude. Then, push your plug on top (you can see the photos above). Reference: ACC-54530 Usage: Molding Color: Gray Diameter: 18 mm Height: 15 mm Packaging: Sold individually Material: Silicone...

...Base and threaded pin in Stainless Steel 1.4301. Support surface (NBR) 85 Shore +/5, FDA compliant. Silicone rubber seal, FDA compliant. Polished base, mirror finish. Natural threaded pin. Black rubber support. Blue rubber seal. 3A Sanitary Standard certification "8880". The high quality of the surface and the double sealing of the thread, along with the special seal on the joint of the...

...Seals for autoclave doors to maintain airtightness Made of natural rubber, neoprene, nitrile, or silicone...

... (23°C, 50% RH)\n• Polymerized thickness: in 24 hours (23°C, 50% RH) 2.5 mm\n• Elongation at break according to ISO 8339: 250%\n• NATURE. One-component sealant, silicone elastomer, neutral oxime.\n• SNJF F25E label façade product.","FIELD OF APPLICATION":"Suitable for creating all sealing and expansion joints, glazing joints, and wood or PVC joinery both indoors and outdoors.\nExcellent UV and temperature stability.\nWater vapor transmission according to NFT 30018: 32 g/m²/24 h.\nApplication temperature: +5°C to +40°C. • UV resistance: excellent."}...

...Elasto Silicone Tape Construction : - 100% self-adhesive silicone rubber tape. Class H. - A transparent polyester film separates the 2 layers of tape on the roll to prevent self-adhesion between layers. - This tape has a triangular cross-section. Rectangular available upon special request. Uses : - Insulation of cables on static and rotating machines. - Insulation on alternators, high voltage transformers, and rectifiers when operating in humid environments. - Replaces heat-shrink tubing. - Good sealing against dust and moisture.

... note that the choice of your gasket material should be made based on the temperature of your process and the fluid being handled. L-shaped connection gasket EPDM - Temp: -40°C to +135°C (+150°C peak) L-shaped connection gasket FKM (BNIC) - Temp: -15°C to +220°C L-shaped connection gasket Silicone - Temp: -40°C to +160°C ORDER EXAMPLE: 961387-25...

...BORFLEX® has been meeting the needs of renowned industrial players in the food industry for many years, specializing in the design and manufacturing of rubber and silicone parts intended for contact with food. BORFLEX® ensures the sealing of installations dedicated to the wine sector while adhering to the required standards.

...Lip seals designed for sealing smoke ducts. These seals can be made from EPDM, Silicone, or FPM. Numerous existing tools.

...Tapping allows you to connect a pipe to an existing network. You simply need to open the main network pipe and apply the tap. For perfect sealing, use silicone or adhesive tape. The customization options available for this product are: - the diameter of the tap - the angle of the tap Dimensions: 400 mm Angle: 30°, 45°...

The company JMTEC, located in Marnaz in Haute-Savoie, near the Swiss and Italian borders, stands out for its recognized expertise in the field of screw machining and precision machining. With many years of experience, our company has evolved with new technologies to enhance its production capabilities. Thanks to the agility and versatility of our diligent and loyal employees, we maintain increased...

...We offer to manufacture your specific molded gaskets according to your specifications for material and hardness for better sealing.

...High-quality EPDM rubber seals and gaskets - Our high-quality EPDM rubber seals and gaskets provide excellent and durable sealing. Weather-resistant, ozone-resistant, and UV-resistant, they are perfectly suited for automotive, construction, plumbing, and industry. For engine compartments, HVAC systems, and industrial machines, they ensure reliable sealing, enhancing efficiency and longevity. Why...

... of this technological marvel. MANUFACTURING Its design is generally made from synthetic rubber in various forms: silicone, fluorocarbon (FPM/FKM), ethylene-propylene-diene monomer also known as EPDM, butadiene-acrylonitrile (NBR), hydrogenated nitrile butadiene (HNBR), or polychloroprene (CR).

... split silicone-coated release liner. The sealing compound is made from a synthetic rubber-based formula with exceptionally high surface adhesion. APPLICATIONS Sealing of roofs, cement castings such as in basements, garages, terraces, as well as joints, seams on buildings and roof areas. It is also regularly used in the installation of indoor wet areas, such as bathrooms, kitchens, and washrooms. The fleece backing is designed to work with all roof coatings, paints, or liquid polyurethane surfaces. Thickness: 0.7 mm Length: 10 m Consists of: fleece backing and finger lift and split liner...

... unique design, the molded polycarbonate visor provides an almost completely panoramic view – 98% visibility! – and is optically perfect. For optimal safety, it is coated with a hard layer and offers excellent impact resistance. The liquid silicone rubber (CSL) facepiece provides unparalleled comfort, with its shape maximizing the sealing surface on most faces. Inside, the hypoallergenic thermoplastic...

...Almost used in all HMI applications, where tactile feeling, reliability, design, and protection are necessary in a cost-effective way. Stroke 0.5 mm 3.0 mm Hardness 40 70 Shore Contact resist Actuating force 0.1 N 5.0 Nb Simple & reliable Flexibility in force/way & design Low cost Water / Heat sealing Different contact concepts Night design option Assembly with caps or housing offered From design to tooling to production from Abatek...

...Double-sided adhesive tape featuring one side with a stronger adhesive mass protected by an overlapping film. Very powerful adhesive with a high layer weight on the protected side (closed). Silicone protective film overlapping on both sides, wider than the double-sided tape to allow for easy removal by the end user. Application in-line on corrugated materials or sequentially on cut-outs. Mainly used for sealing cardboard packaging (postal boxes, e-commerce parcels, cardboard and paper envelopes, etc.) and for bonding synthetic display materials.

...Plastiplac is a protective mat designed to safeguard pipeline entries during accidental chemical spills. Made from 100% polyurethane gel on washable silicone fabric with water and soap, it can therefore be reused. Resistant to acids and chemicals. Sealing is ensured by strong adhesion to the ground. Compatible with the new ADR2009 legislation. IMPORTANT: Always use a mat larger than the area to be protected. Reference: S05A01 Materials: Polyurethane Width (mm): 600 Depth (mm): 600 Height (mm): 13 Weight (kg): 3.2...

... chemical products. Reusable: wash the mat with water and soap after each use and before storage. Simplified storage and quick drying: just fold the mat in on itself. Thanks to the silicone fabric, no additional protection is needed. Mats supplied with a black transport and storage bag. Shapes suitable for the surfaces to be protected: square, round, or rectangular.

...Cord, profiled, toroidal, silicone/FPM, PTFE coated, braided.

...Glass lid in stainless steel 1.4301 (AISI 304) or 1.4404 (AISI 316L) Soda-lime glass, max temperature 120°C Finish inside Ra 0.8 µm, outside Ra 1 µm Seal glass product width silicone...

...FDA & BGA food-grade RED SILICONE, 4 mm ring, 70 shore Reference: M131M40...

...Oriented wire silicone gaskets are gaskets made of silicone, either solid or cellular, incorporating vertically oriented Monel or aluminum wires. The wire density can reach up to 140 wires per cm². This type of gasket offers excellent shielding and outstanding resistance to electromagnetic pulses (EMP), as well as very good environmental sealing. The gaskets can be supplied in the form of sheets...

... phosphating before polyester paint finishing (ISO 12944 standard cat. C3, withstands 480h salt spray test ISO 9227). RAL 7033 shade (cement gray). Earthing system via copper or stainless steel terminal. Sealing principle tested and approved by APAVE. Baskets tested according to the ARDROX 996 P2 penetrant testing method. Installation Reference: BR ECODESIGN...

...Novagard® has been specializing in the manufacture of acetic and neutral silicone for over 30 years, for applications in the fields of electronics, energy, construction, automotive, and general industry. It also offers more specialized products such as silicone lubricants and UV-curable silicones. The Novagard® range is available in various packaging options: cartridge, pail, and drum to suit your manufacturing process. Its numerous references cover most applications requiring the use of adhesive, flexible, and durable sealing products.

... chimneys. Break resistance 70N/25mm. Elongation at break 8.5%. Adhesion on steel 14.5N/25mm. *METHOD OF USE Clean the area to be protected. Cut the desired length with scissors or a cutter. Apply to the area to be insulated, sealing all cracks. Reference: MAI-RUBADHALU/6 Weight: 200 grams...

...In the field of electronics, silicone adhesives and resins are used to protect components from moisture, thermal stress, and external chemical factors. They are also used in mechanical assembly for creating sealing joints.

...and foams of different thicknesses. Frequency range of absorption between 1 GHz and 40 GHz. We are your partner for: • filled, conductive seals • EMC seals • conductive, corrosion-resistant EMC seals • two-component seals • insulation seals • environmental sealing • thermal conductive pads • thermal management • gap filler pads • dispensing thermal conductive material • microwave absorbers • metallic shielded products • seals for enclosures...

...PLASTILINE is a modeling clay available in different hardness levels. This clay remains moldable over time. It can be used in solid, softened, or liquid states. It allows for sculpting with great precision (1/10mm), sealing molds, creating joint surfaces, replacing missing parts, and taking impressions. -> Application Used with silicone and polyurethane elastomers, plaster, cement, and alloys. RATIO: - HARDNESS SHORE: - WORKING TIME: - SELLING UNIT: 1 - 5KG MINIMUM ORDER: 1KG KIT...

...base) are also made of thick steel sheet. The extractor meets ATEX requirements with the following components: Execution 5, ATEX IIB–Zone 22–category 3G or 3D–T3 SIEMENS Motor–B3–400/690V /50 Hz–EEXd–IIB–Zone 22–category 3G or 3D–T4 Welded volute Inspection door Protection grille for suction and blowing Brass bell Brass disc on the motor mounting side Silicone sealing between the volute and the bell.