Base and threaded pin in Stainless Steel 1.4301.
Support surface (NBR) 85 Shore +/5, FDA compliant.
Silicone rubber seal, FDA compliant.
Polished base, mirror finish.
Natural threaded pin.
Black rubber support.
Blue rubber seal.
3A Sanitary Standard certification "8880".
The high quality of the surface and the double sealing of the thread, along with the special seal on the joint of the adjustable machine foot pin, prevent dirt from adhering and minimize cleaning time.
The machine foot is delivered with the 3A logo.
The machine foot is specially suitable for machines, installations, and devices in the food industry, breweries, dairies, the beverage industry, and the pharmaceutical industry.
Reference: 27791-05
Drawing indication: Adjustment range
Support heads serve as a support for raw or machined parts and as stops. They can also be integrated into standard clamping or support elements. To co...
Corrected support - Supports and positioning feet
Reference: 02130
Material: Case hardening steel 1.0301
Finish: Case hardened and tempered, blued an...
The pneumatic clamping fixture is suitable for clamping parts. The clamping fixtures are operated by compressed air. The significant pivoting angle of...
Bicouche. The end loops are fully reinforced on both sides, rejuvenated to half the width of the strap.
The lifting straps comply with the DIN EN 1492...
The A-shaped dowels are used to position parts or components in tolerance holes.
The flattened C shape allows for compensation of any dimensional vari...
The eccentric clamping jaw can be used directly on the machine table or on adapter plates. The clamping effect allows for the workpiece to be secured ...
The sealing ring's support surface should ideally be flat and perpendicular to the drilling, with a surface roughness of Ra ≤ 0.8 µm.
Inadequate seali...
The pneumatic pivoting clamping cylinder is suitable for clamping parts from above. The pivoting and clamping functions are performed via a pneumatic ...
{"Usage":"Multiple slides of different lengths can be mounted one behind the other or side by side. The precision tooth design allows for very accurat...
Our clamping blocks 090602010 to 090602030 consist of a fine-pitch magnetic system, capable of acting on two to three distinct surfaces at once (4 mm ...
Milled gear, straight engagement.
Pressure angle 20°, natural.
The racks are designed to be butted together.
Reference: 22420
Material: Steel 1.0503 ...
1.4401 stainless steel, similar to DIN 39.
Grip suitable for DIN 950 handwheels.
Reference:06293
Material:1.4305 or 1.4401 stainless steel
Version:El...
Support heads serve as a support for raw or machined parts and as stops. They can also be integrated into standard clamping or support elements. To co...
Corrected support - Supports and positioning feet
Reference: 02130
Material: Case hardening steel 1.0301
Finish: Case hardened and tempered, blued an...
The pneumatic clamping fixture is suitable for clamping parts. The clamping fixtures are operated by compressed air. The significant pivoting angle of...
Bicouche. The end loops are fully reinforced on both sides, rejuvenated to half the width of the strap.
The lifting straps comply with the DIN EN 1492...
The A-shaped dowels are used to position parts or components in tolerance holes.
The flattened C shape allows for compensation of any dimensional vari...
The eccentric clamping jaw can be used directly on the machine table or on adapter plates. The clamping effect allows for the workpiece to be secured ...
The sealing ring's support surface should ideally be flat and perpendicular to the drilling, with a surface roughness of Ra ≤ 0.8 µm.
Inadequate seali...
The pneumatic pivoting clamping cylinder is suitable for clamping parts from above. The pivoting and clamping functions are performed via a pneumatic ...
{"Usage":"Multiple slides of different lengths can be mounted one behind the other or side by side. The precision tooth design allows for very accurat...
Our clamping blocks 090602010 to 090602030 consist of a fine-pitch magnetic system, capable of acting on two to three distinct surfaces at once (4 mm ...
Milled gear, straight engagement.
Pressure angle 20°, natural.
The racks are designed to be butted together.
Reference: 22420
Material: Steel 1.0503 ...
1.4401 stainless steel, similar to DIN 39.
Grip suitable for DIN 950 handwheels.
Reference:06293
Material:1.4305 or 1.4401 stainless steel
Version:El...